Frigidaire FCFS181LQBA Bedienungsanleitung

COMMERCIAL

FREEZER/REFRIGERATOR

TABLE OF CONTENTS

Product Registration .............................................................. 2

Important Safety Instructions ................................................ 2

First Steps .................................................................................. 3

Appliance Start=up ................................................................. 6

Features ................................................................................ 6

Care and Cleaning ..................................................... 7

Energy=Saving Tips ........................................................ 8

Power Failure ..................................................................... 8

Before You Call .............................................................. 9

Wiring Diagram ..................................................................... 11

Warranty ........................................................................... 12

READ AND SAVE THESE INSTRUCTIONS A01063701(August2014)

Product Registration Important Safety Instructions

Read all instructions before using

this appliance,

Read and Save These Instructions

These instructions include information

which is intended to assure the operator of

correct installation, operation and service.

Before attempting installation, adjustment or

maintenance, be certain of the following:

• That you have read and fully understand

the instructions.

That you have all the tools required and are

trained to use them.

That you have met all installation and

usage restrictions and are familiar with the

functions and operations of the unit.

That you follow all instructions exactly

as given.

All the fittings, measurements, recommendations

and procedures are significant. Substitutions

and approximations must be avoided. Improper

handling, maintenance, installation and

adjustment, or service attempted by anyone

other than a qualified technician, may void the

future warranty claims and cause damage to the

unit and/or result in injury to the operator and/

or bystanders.

Record your !odel and

Serial Numbers

Record the model number and serial number of

this appliance in the space provided below (the

serial plate is located inside the

cabinet compartment).

Model Number:

Serial Number:

Purchase Date:

Theself-addressedPRODUCTREGISTRATION

CARD(shownabove)shouldbefilledin completely,

signedandreturnedto the addressprovided.

For Your Safety

Do not store or use gasoline or other

flammable vapors and liquids in the vicinity of

this unit or any other appliance. Read product

Child Safety

• Destroy carton, plastic bags, and any

exterior wrapping material immediately

after the appliance is unpacked. Children

should never use these items for play.

Cartons covered with rugs, bedspreads,

plastic sheets or stretch wrap may

become airtight chambers and can

quickly cause suffocation.

• Remove all staples from the carton.

Staples can cause severe cuts, and destroy

finishes if they come in contact with other

appliances or furniture.

• An empty, discarded ice box, refrigerator,

or freezer is a very dangerous attraction

to children.

• Remove and discard any spacers used to

secure the shelves during shipping. Small

.............................objects are a choke hazard to ch!!dren .......................

Proper Disposal of Appliance

Risk of Child Entrapment

Child entrapment and suffocation are not

problems of the past. 3unked or abandoned

refrigerators or freezers are still dangerous

- even if they will sit for "just a few days" If

you are getting rid of your old refrigerator or

freezer, please follow the

instructions below to help

prevent accidents:

Remove the door.

Have the

refrigerant

removed by a

qualified technician.

Important Safety Instructions

Electrical Information Other Precautions

These guidelines must be followed to ensure • NEVER unplug the appliance by

that safety mechanisms in the design of this pulling on the power cord. Always grip

app!iance will operate proper! y............................................... the plug firmly and pull straight out from

the receptacle.

• To avoid electrical shock, unplug the

appliance before cleaning.

Avoid fire hazard or electric shock. Do not use

an extension cord or an adapter plug. Do not

remove any prong from the power cord.... ...............

_rounaln_ type Turning the control to "OFF" turns off the

wall receptacle compressor but does not disconnect power to

Do not, under "_

any circumstances,]

grounding prong. /

Power sup_ply

cord w!.th3-prong

grounamg p_ug

Refer to the serial plate for correct electrical

rating. The power cord of the appliance

is equipped with a three-prong grounding

plug for protection against shock hazards.

It must be plugged directly into its own

properly grounded three-prong receptacle,

protected with a 15-amp time delay fuse

or circuit breaker. The receptacle must

be installed in accordance with the local

codes and ordinances. Consult a qualified

electrician. Receptacles with Ground

Fault Circuit Interrupters (GFCI) are

NOT RECOMMENDED. DO NOT USE AN

EXTENSION CORD OR AN ADAPTER PLUG.

*If the voltage varies by 10% or more,

appliance performance may be affected.

Operating the appliance with insufficient

power can damage the compressor. Such

damage is not covered under the warranty.

If you suspect your voltage is high or low,

consult your power company for testing.

*To prevent the appliance from being turned

off accidentally, do not plug the unit into an

outlet controlled by a wall switch or pull cord.

*DO NOT pinch, knot, or bend the power cord

in any manner.

First Steps

Inspection for Damage

Inspect the underside of the cabinet and

packaging for damage, similar to what can

be caused with a forklift. If hidden damage

is found after uncrating, immediately call the

delivery carrier and request an inspection. Retain

all packaging and crating materials until the

inspection is complete.

Parts and Accessories

Check to make sure that you have received the

box containing all of the components listed below.

A Carriage Bolt (4)

B Lock Nut (4)

C Swivel Casters (2)

D Fixed Caster (2)

E Hex Screw (10)

C _ E

First Steps

Tools Needed

The following tools are required to assemble and install the casters to the unit:

5/16", 3/8" and 9/16" Adjustable Phillips

Socket or Open End Wrench Wrench or Screwdriver

Pliers

Uncrating and Set=up

1. Remove carton and all loose parts from

inside the unit.

2. Remove the rear access guard and place

it and the screws in a safe place for

reassembly later.

3. Using an assistant, carefully tip the unit

onto its back and rest on blocks to avoid

damaging the condensate drain hose

and the plastic raceway that covers the

evaporator tubing on the back of the

cabinet.

4. Remove and discard the two front brackets

with leg leveler using a 5/16" socket

wrench. See Figure 1.

5. FOR GLASS DOOR MODELS ONLY - Remove

bottom door support bracket and screw

opposite the door hinge using a 3/8" socket

wrench. See Figure 2.

Door

support

bracket

Figure 2

Door Swing Reversal

In order to reverse door, order service kit from Frigidaire Commercial Service Center

at 1-866-738-1640.

For right hand swing doors, order kit #5304488173.

For left hand swing doors, order kit #5304487215.

First Steps

Front Fixed Caster Installation

Locate and aligr fixed caster (with brake lever

facing front of unit -see Figure 3) over the

same mounting holes from bracket in Figure 1

using 6 hex screws (3 for each caster). Secure

the screws snug using a 3/8"open end wrench.

Repeat this procedure for opposite corner, DO

NOT OVERTIGHTEN.

- Front

of unit

(3)

Fixed -/

caster Figure3

Rear Swivel Caster Installation

1. Remove and discard the screws shown in

Figure 4 from each bottom corner using a

5/16" socket wrench.

Figure 4

2. Locate and align swivel caster over the

holes and install with 2 hex screws. Secure

the screws snug using a 3/8" socket

wrench. DO NOT OVERTIGHTEN.

3. On the opposite side of the swivel caster

plate, insert 2 carriage bolts through the

compressor support rail and swivel caster

plate. Use a lock nut on each bolt and

tighten securely using a 9/16" socket

wrench. See Figure 5.

(2) Carria!

lock nut Install caster

using (2)hex

screws

Swivel caster Figure5

4. Repeat the same procedure for the opposite

rear corner.

5. With the help of an assistant, carefully

upright the unit. Reassemble the rear

access guard with screws.

Unit will roll forward as it is tipped up,

Appliance Placement

Leave a 1" space on all sides and the back of

the cabinet for ease of installation, proper air

circulation and electrical connections. DO NOT

block the front grill on the lower front of your

appliance. Sufficient air circulation is essential

for the proper operation of your appliance.

Choose a place that is near a grounded electrical

outlet. For the most efficient operation, the

appliance should be located where surrounding

temperatures will not drop below 40OF (5oC)

or exceed 110OF (43oc). Additional compressor

heaters are not recommended.

Insulation

The insulated space of this cabinet is sealed

to maintain peak efficiency. Holes drilled in

the cabinet may destroy that seal and damage

electrical wiring located in the insulated space.

DAMAGED ELECTRICAL WIRING OR WET

INSULATION CAUSED BY DRILLING WILL

VOID THE WARRANTY,

Appliance Start=up Features

Once the appliance has been located in its

permanent location and the proper power and

grounding has been provided, the following

items must be checked or completed:

Cool Down Period

For safe food storage, allow 24 hours for the

appliance to cool down completely before loading

with food. The appliance will run continuously

for the first several hours. Do not place any food

in the appliance until after the first 24 hours of

operation.

Thermostat Setting

The appliance is shipped from the factory with

the thermostat set at about the mid-point of the

operating range. Adjustments colder or warmer

can be made after the appliance has been running

for at least 8 hours. Allow at least 8 hours for

temperature stabilization before re-adjusting the

thermostat.

Defrost Setting

The appliance is designed to defrost

automatically every 12 hours. To set the time of

defrost, wait until the desired time to defrost.

With the notch on the timer knob aligned with

the line on the bracket (Figure 6), turn the

defrost timer knob clockwise slowly. The timer

will click several times, then once loudly, at

which point the defrost cycle begins. The timer

knob will advance through the defrost cycle, then

click loudly at the end of the cycle. The appliance

will defrost automatically every 12 hours after

the first defrost cycle.

For example, to set the appliance to defrost

at 10:00 AM, turn the timer knob clockwise

at 10:00 AM until the timer clicks loudly. The

appliance will defrost daily at 10:00 AM and

again 12 hours later at 10:00 PM. NOTE: The

appliance interior temperature will rise slightly

during the first defrost cycle.

Figure 6

• Heavy-duty epoxy powder-coated

adjustable shelves

• NSF-certified top-mounted evaporator

• 2-1/2" urethane foam cabinet insulation

• Torsion-spring door closer

• Heavy-duty fixed and swivel casters

• 17-watt fluorescent lamp

• Stainless steel evaporator housing

• Removable stainless steel drain cover

• Adjustable temperature control

• NSF-certified interior

• Heavy-duty front grill

• Heavy-duty commercially rated electrical

harness

• Heavy-duty removable stainless steel shelf

support

This appliance is provided with 4 shelves. One

goes on the floor of the cabinet and the other 3

are placed in the metal side supports wherever

they are needed. The shallow shelf goes in the

upper position.

Shelf

Bottom

Shelf

Casters

The appliance comes with 4 casters; 2 with locks

for the front of the unit and 2 without locks for

the back of the unit. The casters allow you to

move the unit to it's final destination with ease.

The casters can then be locked into place.

Refer to the First Steps section for caster

installation instructions.

Adjustable Temperature Control

The adjustable cold control is located on the top

left side of the evaporator housing inside the

unit. "5" is the medium (recommended) setting

and "9" is the coldest setting.

Features Care and Ciearlirlg

NSF Certified Temperature Gauge

This appliance is equipped with an NSF-certified

temperature gauge to display cabinet internal

temperature. The temperature gauge is located

on the top right side of the evaporator housing

inside the unit.

Fluorescent Lamp (glass door models)

The Glass Door Refrigerator is equipped with

a 17 watt fluorescent lamp. A ballast - lamp

mismatch may result in poor or no lighting.

If the lamp fails, replace with a lamp of the

same type and wattage. Also, replace a lamp

that flickers continuously. This could damage the

ballast.

Turning the light off, when not in use, will save

energy. However, frequent ON-OFF cycling will

reduce the lamp life.

Use only NSF certified lamp which can be

ordered from your Frigidaire Commercial Service

Center by calling 1-866-738-1640.

Interior Light

(stainless steel door models)

The stainless steel door models are equipped with

a 40-watt bulb that lights up when the door is

opened. If the bulb goes bad, replace with bulb of

the same type and wattage. This is a special bulb

with a shatterproof coating. Use only an NSF-

certified bulb of the same type and wattage which

can be ordered from your Frigidaire Commercial

Service Center by calling 1-866-738-1640.

Cleaning the Interior

Be sure to turn the temperature control to "OFF"

and unplug the electrical cord. Wash the inside

surface of the storage area with a Solution of

1 tbsp. (12 g) of baking soda in 1 qt. (1 I)

warm water. Rinse thoroughly with clean, warm

water and wipe dry.

Cleaning the Exterior

Wipe the cabinet exterior occasionally with a

cloth dampened in mild detergent and water.

Rinse and wipe dry with a soft cloth. Do not use

razor blades or other sharp instruments that can

scratch the appliance surface when removing

adhesive labels. Any glue left from the tape can

be removed with a mixture of warm water and

mild detergent or touch the residue with the

sticky side of tape already removed. DO NOT

REMOVE THE SERIAL PLATE.

Condensate Pan

Some models have a condensate pan in a fixed

position located behind the toe grill. This must not

be removed from under the cabinet. If the pan is

removed, condensate will drop onto the floor.

Energy=Saving Tips Power Failure

This appliance is designed for efficiency with

heavy foam insulation. However, there are things

that the user can do to maintain the appliance in

operating condition.

*Do not operate the appliance any colder

than necessary to maintain safe, product

storage temperatures.

,lake sure the appliance is located to prevent

direct exposure to sunlight, air ducts, etc.

*Keep the lid closed except for normal use.

Inspect the door often to see that it self-

closes and the gaskets are in good condition.

*Do not overstock the product in the cabinet

because it will block the normal air flow.

*Have at least annual inspections by a

qualified service company to see that the

refrigerant charge is correct.

*This appliance operates more efficiently in

a cooler ambient than in a hot ambient.

Try to maintain an ambient below 80OF

(27oC) and 65% RH (Relative Humidity) for

maximum efficiency.

Periods of Non=use and Hoving Tips

Leave the appliance operating during periods of

non-use of less than 3 weeks.

Long Periods of Non=use

If the appliance will not be used for

several months:

*Remove all food and unplug the power cord.

*Clean and dry the interior thoroughly.

*Leave the appliance door open slightly,

blocking it open if necessary, to prevent

odor and mold growth.

Hoving

When moving the appliance, follow these

guidelines to prevent damage:

* Disconnect the power cord plug from the

wall outlet.

*Remove foods, then defrost, and clean

the appliance.

*Secure all loose items such as base panel,

baskets, and shelves by taping them

securely in place to prevent damage.

*][nthe moving vehicle, secure appliance in

an upright position to prevent movement.

Also, protect outside of appliance with a

blanket or similar item.

DO NOT open the appliance lid unnecessarily if

the appliance is off for several hours.

If a power failure occurs, pack 7 or 8 pounds

of dry ice into the freezer every 24 hours. Look

in the Yellow Pages under "Dry Ice'; "Dairies';

or "Ice Cream Manufacturers" for local dry ice

suppliers. Always wear gloves and use caution

when handling dry ice.

Before You Caii

TROUBLESHOO_NG

GUIDE

PROBLEM

Before calling for service, review this list. It may save you time and

expense. This list includes common occurrences that are not the

result of defective workmanship or materials in this appliance.

CAUSE CORRECTION

APPLIANCE OPERATION

Appliance does not run.

Appliance runs too much

or too long.

•Appliance is plugged into

a circuit that has a ground

fault interrupt.

•Temperature control is in

the "OFF" position.

•Appliance may not be

plugged in, or plug may

be loose.

•Fuse blown or tripped

circuit breaker.

•Power outage.

•Room or outside weather

is hot.

•Appliance has recently

been disconnected for a

period of time.

•Large amount of warm

or hot food have been

stored recently.

•Door is opened too

frequently or kept open

too long.

•Appliance door may be

slightly ajar.

•Temperature control is set

too low.

Appliance gaskets are

dirty, worn, cracked or

poorly fitted.

Use another circuit. If you are

unsure about the outlet, have it

checked by a certified technician.

See Thermostat Setting.

Ensure plug is tightly pushed

into outlet.

•Check/replace fuse with a 15-amp

time delay fuse. Rest circuit breaker.

•Check house lights. Call local

electric company.

•It's normal for the appliance to work

harder under these conditions.

•It takes 24 hours for the appliance

to cool down completely.

Warm food will cause appliance

to run more until the desired

temperature is reached.

Warm air entering the appliance

causes it to run more. Open the

door less often.

See "Door Problems':

Turn control knob to a warmer

setting. Allow several hours for the

temperature to stabilize.

Clean or change gasket. Leaks in

the lid seal will cause appliance

to run longer in order to maintain

desired temperature.

Interior appliance •Temperature control is set •Turn control knob to a warmer

temperature is too cold. too low. setting. Allow several hours for the

temperature to stabilize.

Interior appliance •Temperature control is set •

temperature is too warm. too warm.

Appliance external surface

temperature is warm.

Door is open too frequently

or kept open too long.

•Large amount of warm or

hot food have been stored

recently.

• Appliance has recently

been disconnected for a

period of time.

The external appliance

walls can be as much

as 30°F warmer than

room temperature.

Turn control knob to a colder

setting. Allow several hours for the

temperature to stabilize.

• Warm air entering the appliance

causes it to run more. Open the

door less often.

• Wait until the appliance has had

a chance to reach its selected

temperature.

• Appliance requires 24 hours to cool

down completely.

This is normal while the

compressor works to transfer heat

from inside the appliance cabinet.

Before You Cali

PROBLEM CAUSE CORRECTION

SOUND AND NOISE

Louder sound levels • Modern appliances • This is normal. When the

whenever appliance is on. have increased storage surrounding noise level is low, you

capacity and more stable may hear the compressor running

temperatures. They require while it cools the interior.

heaw-duty compressors.

Louder sound levels when • Appliance operates at • This is normal. Sound will level

compressor comes on. higher pressures during off or disappear as appliance

the start of the ON cycle, continues to run.

Poppingor cracking sound • Metal parts undergo • This is normal. Sound will level

when compressor comes on. expansion and contraction, off or disappear as appliance

as in hot water pipes, continues to run.

Bubbling or gurgling sound. • Refrigerant (used to cool • This is normal.

appliance) is circulating

throughout the system.

Vibrating or rattling noise. • Appliance is not level. It

rocks on the floor when it

is moved slightly.

Floor is uneven or weak.

Appliance is touching

the wall.

Level the appliance by putting

wood or metal shims under part of

the appliance.

Ensure floor can adequately

support appliance. Level

the appliance.

Re-level appliance or move

appliance slightly.

WATER/MOISTURE/FROST INSIDE APPLIANCE

Moisture forms on inside • Weather is hot and humid, • This is normal.

appliance walls, which increases internal

rate of frost build-up.

ODOR IN APPLIANCE

Odors in appliance. • Interior needs to be • Clean interior with sponge, warm

cleaned, water, and baking soda.

• Food with strong odors are • Cover the food tightly.

in the appliance.

DOOR PROBLEMS

Door will not close. • Appliance is not level. It • Level the appliance by putting

rocks on the floor when it wood or metal shims under part of

is moved slightly, the appliance.

• Floor is uneven or weak. • Ensure floor can adequately

support appliance. Level the

appliance by putting wood or metal

shims under part of the appliance.

LIGHTING PROBLEMS

Fluorescent lamp is not •The fluorescent lamp is • See "Fluorescent Lamp" in

on. burned out. Features section.

• No electric current is • See "Appliance does not run"

reaching the appliance.

FOR QUESTIONS! COMMENTS OR SERVICE PLEASE CALL US

TOLL FREE AT 1=866=738=1460,

Inhaltsverzeichnis

Andere Frigidaire Kühlschrank Handbücher

Frigidaire

Frigidaire FRT21INLH Bedienungsanleitung

Frigidaire

Frigidaire FRS24WSG Bedienungsanleitung

Frigidaire

Frigidaire FRT21LR7A Bedienungsanleitung

Frigidaire

Frigidaire FRT15HB3A Bedienungsanleitung

Frigidaire

Frigidaire FRT21KG4E Bedienungsanleitung

Frigidaire

Frigidaire FFRU17B2QW Betriebsanleitung

Frigidaire

Frigidaire FRS26RLECS0 Benutzerhandbuch

Frigidaire

Frigidaire RF3202C Bedienungsanleitung

Frigidaire

Frigidaire GLRH1779GW3 Bedienungsanleitung

Frigidaire

Frigidaire FRS20ZGJ Bedienungsanleitung

Frigidaire

Frigidaire FRS26TS7DW5 Benutzerhandbuch

Frigidaire

Frigidaire FRFS2823AS Bedienungsanleitung

Frigidaire

Frigidaire FRT21S6A Bedienungsanleitung

Frigidaire

Frigidaire FPHS2699K Bedienungsanleitung

Frigidaire

Frigidaire FRS26FCD Bedienungsanleitung

Frigidaire

Frigidaire FRT18IC5A Bedienungsanleitung

Frigidaire

Frigidaire FRSHT5EFW0 Bedienungsanleitung

Frigidaire

Frigidaire FRS26KW3AB4 Service Benutzerhandbuch

Frigidaire

Frigidaire FR 311 Bedienungsanleitung

Frigidaire

Frigidaire FRS26ZTH Bedienungsanleitung

Frigidaire

Frigidaire 241607805 Betriebsanleitung

Frigidaire

Frigidaire F44N21CE Bedienungsanleitung

Frigidaire

Frigidaire FSC23F7F Bedienungsanleitung

Frigidaire

Frigidaire Gallery FGUN2642L Betriebsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung

Teledyne

Teledyne 6712FR and Betriebsanleitung