Frigidaire FRS26ZXHW2 Bedienungsanleitung

P/N 218955101 (0101)

Versión en español ..................................... 2

Product Registration................................... 2

Important Safety Instructions ................2-3

First Steps ................................................3-4

Energy Saving Ideas................................... 5

Setting the Controls .................................... 5

Fresh Food Storage..................................... 6

Automatic Ice and Water Dispenser ......7-9

Care and Cleaning .............................. 10-11

Removing the Handles and Doors .... 11-12

Avoid Service Checklist...................... 13-16

Normal Operating Sounds ....................... 16

Warranty .................................................... 17

Service Information (Canada).................. 18

Product Registration Record Your Model and Serial Numbers

Record the Model No. and Serial No. of this refrigerator in the spaces provided

below. These numbers are found on the serial plate located on the ceiling of the

refrigerator compartment.

Model No. __________________________________________________

Serial No. ___________________________________________________

Theself-addressedPRODUCTREGISTRATIONCARDshouldbefilledincompletely,

signed and returned to the Electrolux Home Products.

Versión en español

Si desea obtener una copia en español de

este Manual del Usuario, sírvase escribir la

dirección que se incluye a continuación.

Solicite la P/N 218955200.

Spanish Owner's Guides

Electrolux Home Products

P.O. Box 212378

Augusta, GA 30917

Proper Disposal of Your

Refrigerator/Freezer

Risk of child entrapment.

Child entrapment and suffocation are

not problems of the past. Junked or

abandoned refrigerators are still

dangerous-eveniftheywillsitfor"just

a few days." If you are getting rid of

your old refrigerator, please follow

instructions below to help prevent

accidents.

BEFOREYOUTHROW

AWAY YOUR OLD

REFRIGERATOR OR

FREEZER:

• Take off doors.

• Leave shelves in

place, so children

may not easily

climb inside.

For Your Safety

Donotstoreorusegasolineorotherflammablevaporsandliquidsinthevicinityof

this,oranyotherappliance. Readproduct labels for flammability and other warnings.

• Destroy carton, plastic bags, and any exterior wrapping material immediately

aftertherefrigeratorisunpacked.Childrenshouldneverusetheseitemsforplay.

Cartons covered with rugs, bedspreads, plastic sheets, or stretch wrap may

become airtight chambers that can quickly cause suffocation.

• Remove all staples from the carton. Staples can cause severe cuts, and ruin

finishes if they come in contact with other appliances or furniture.

• Anempty,discardedicebox,refrigerator,orfreezerisaverydangerousattraction

to children. Remove door of any appliance that is not in use, even if it is

being discarded.

Theseguidelinesmustbefollowedtoensurethatsafetymechanismsinthe

design of this refrigerator will operate properly.

•Refrigerator must be plugged into its own 115 Volt, 60 Hz, AC only

electrical outlet. The power cord of the appliance is equipped with a three-

prong grounding plug, for your protection against shock hazards. It must be

pluggeddirectlyintoaproperlygroundedthree-prongreceptacle.Thereceptacle

must be installed in accordance with local codes and ordinances. Consult a

qualified electrician. Do Not Use An Extension Cord Or An Adapter Plug.

• Ifvoltagevariesby10percent ormore,performanceofyourrefrigeratormaybe

affected. Operating the refrigerator with insufficient power can damage the

compressor.Suchdamageisnotcoveredunderyourwarranty.Ifyoususpectyour

voltage is high or low, consult your power company for testing.

• Topreventtherefrigeratorfrombeingturnedoffaccidentally,donotplugtheunit

into an outlet controlled by a wall switch or pull cord.

• Do not pinch, knot, or bend the power cord in any manner.

Important Safety

Instructions

Read all instructions before

using this refrigerator.

Child Safety

ElectricalInformation

Avoid fire

hazardorelectricshock.Do

notuseanextensioncordor

an adapter plug. Do not

remove any prong from

powercord.

First Steps This Owner’s Guide provides specific operating instructions for your model. Use

refrigeratoronlyasinstructedinthisOwner’sGuide. Beforestartingrefrigerator,

follow these important first steps:

Location

Install refrigerator:

• neara grounded electrical outlet. DO NOT use an extension cord or an adapterplug.

• outofdirectsunlightandawayfromrange,dishwasher,orotherheatsources,

if possible.

• onafloorthatislevelandstrongenoughtosupportafullyloadedrefrigerator.

• where a water supply is available for automatic ice maker.

Installation

• Do not install refrigerator where temperature will drop below 60°F (15°C), or

rise above 110°F (43°C). Compressor will not be able to maintain proper

temperatures.

• In a recessed installation, allow an extra 1/2 inch (10-15 mm) on each side for

ease of installation.

• If the hinge side of the unit will be placed against a wall, allow a 1-3/4 inch (44

mm) space between wall and refrigerator to permit proper door swing.

Door Opening

For best use of drawers and freezer basket, refrigerator should be in a position

where both the refrigerator and freezer doors can be opened about 135°.

Leveling

• Refrigerator must be leveled with all bottom corners resting firmly on a solid

floor. Adjust front rollers to level cabinet both front-to-rear and side-to-side.

Keepcabinet aslowaspossible forstability. Neveradjustcabinet rollerssofront

is lower than rear.

•Toadjust frontrollers: Openrefrigeratorand freezerdoors.Removetoegrille

by pulling it straight out. Adjust rollers by turning each roller adjusting bolt with

an adjustable wrench, a socket wrench, or a nutdriver until refrigerator is level

and stable. Rear rollers are not adjustable.

• Check both doors to be sure seals touch cabinet evenly on all four sides.

• Iffreezerdoorishigherthanrefrigeratordoor,raiserightcornerand/orlowerleft

corner until doors align across top of cabinet.

• Ifrefrigeratordoorishigherthanfreezerdoor,raiseleftcornerand/orlowerright

corner until doors align across top of cabinet.

•To replace toe grille: Line up tabs with holes, and push grille straight on.

Cleaning

• Wash the inside, all removable parts, and the outside with mild detergent and

warm water. Wipe dry. Do Not Use Harsh Cleaners On These Surfaces.

•Do Not use razor blades or other sharp instruments that can scratch appliance

surface, when removing adhesive labels. Any glue left from the tape or energy

labelcanberemovedwithamixtureofwarmwaterandmilddetergent,ortouch

glue with sticky side of tape already removed.

•Do Not Remove Serial Plate.

Adjusting Front Rollers

ROLLER ADJUSTING

BOLT

Replacing Toe Grille

Important Safety

Instructions(continued) • Neverunplugtherefrigeratorbypullingonthepowercord.Alwaysgriptheplug

firmly, and pull straight out from the receptacle.

• To avoid electrical shock, unplug the refrigerator before cleaning and before

replacingalightbulb. NOTE: Turningthecontrol toOFFturnsoffthecompressor,

butdoesnotdisconnectpowertothelightbulborotherelectricalcomponents.

• Do not operate the refrigerator in the presence of explosive fumes.

• Avoid contact with any moving parts of the automatic ice maker.

Other Precautions

First Steps

(continued) Connecting Ice Maker to Water Supply

Do Not Install Ice Maker Tubing Where Temperature May

Fall Below Freezing.

Check to be sure your water connection will comply with local plumbing codes.

Water quality determines your ice quality. It is best to connect the ice maker to

water that is not softened. Chemicals from a malfunctioning softener can

damage the ice maker. If the ice maker is connected to soft water, ensure that

the softener is maintained and working properly.

The ice maker requires a 1/4 inch (6.4 mm) copper water supply line (with

shutoff)fromyour household water system.Allowenough tubing behind your

refrigeratorto permitmoving out to clean floor.

Water line kit 5308950117 is available through your dealer at extra charge. This

kit includes 25 feet (7.6 meters) of 1/4 inch diameter copper tubing, plus parts to

connect to your cold water line, including a saddle valve assembly. You will need

to purchase a 1/4 inch brass compression nut and ferrule from your local hard-

wareor plumbing store.

1. Turn ON water supply and flush out copper tubing. Turn off water supply.

2. Unplugrefrigerator.

3. Install WATER SUPPLY LINE as follows (figure 2):

• Slide brass nut, then ferrule, onto copper tubing.

• Push end of copper tubing as far into the metal water valve fitting as it will

go (1/4 inch). Slide ferrule into fitting and thread brass nut onto inlet,

tightenfinger tight plus 1/2 turnwith wrench.

NOTE: Some models may have a cap on the valve. Unscrew the cap and

discard.

4. Secure copper tubing with STEEL CLAMP and screw to rear panel at location

shown (Figure 3).

5. Coil water supply tubing as shown (figure 3).

NOTE: To prevent vibration noise and wear, leave a space between all tubing

andother surfaces.

6. Turn on water supply and check all connections for leaks (figure 3).

7. Plugrefrigeratorcord intowall outlet.

8. To begin ice production, lower the Wire Signal Arm to the “down” or “ON”

position(Figure 4).

IMPORTANT

Ice production will begin when freezer reaches normal operating temperature.

Air in new plumbing lines may cause ice maker to cycle two or three times

before making a full tray of ice.

New plumbing may cause ice to be discolored or have poor flavor. Discard ice

made during the first 24 hours. After installation, if you wish to shut the ice

maker off, lift the Wire Signal Arm until it clicks and locks in the “UP” position.

Figure1

Figure2

Figure3

Figure4

• Installtherefrigeratorinthemostcoolpartoftheroom,outofdirectsunlightand

away from heating ducts or registers. Do not place the refrigerator next to heat-

producing appliances such as a range, oven or dishwasher. If this is not possible,

asectionofcabinetryoranaddedlayerofinsulationbetweenthetwoappliances

will help the refrigerator operate more efficiently.

• Level the refrigerator so the doors close tightly.

• Refer to this Owner's Guide for the suggested refrigerator settings.

• Periodic cleaning of the condenser will help the refrigerator run more efficiently.

See Outside in the Care and Cleaning section.

• Do not overcrowd the refrigerator or block cold air vents. Doing so causes the

refrigeratorto run longerand use more energy. Shelves should not be lined with

aluminum foil, wax paper or paper toweling. Liners interfere with cold air

circulation, making the refrigerator less efficient, which could cause food

spoilage.

• Coverfoodsandwipecontainersdrybeforeplacingthemintherefrigerator.This

cuts down on moisture build-up inside the unit.

• Organize the refrigerator to reduce door openings. Remove as many items as

needed at one time and close the door as soon as possible.

Setting the Controls Cool Down Period

Toensuresafefoodstorage,allowtherefrigeratortooperatewiththedoorsclosed

for at least 8 to 12 hours before loading with food.

Refrigerator Control

• Therefrigeratorcontrolshouldbesetatthemidpointofthedialforatrialperiod

of 24 hours.

• After 24 hours, adjust the control as needed. For colder temperatures, turn the

dial a notch toward COLDEST. For warmer temperatures, turn the dial a notch

toward COLD. Adjust temperatures by one increment at a time.

Freezer Control

• The freezer control should be set at the midpoint of the dial for a trial period of

24 hours.

• After 24 hours, adjust the control as needed. For colder temperatures, turn the

dial a notch toward COLDEST. For warmer temperatures, turn the dial a notch

toward COLD. Adjust temperatures by one increment at a time.

NOTE: Whenfirstsettingthecontrolsorwhenchangingasetting,wait24hoursfor

the temperature to stabilize before making additional changes.

Turning the freezer control may change temperatures in both compartments. For

example,if thefreezercontrolis turnedtoacolder setting,therefrigeratorcontrol

may have to be adjusted to a warmer one. Turning the refrigerator control will

change only the refrigerator temperature.

IMPORTANT: If the freezer control is turned to OFF, cooling stops in both

compartments.

You may hear the "Frost Free" system working. A fan circulates air in the

refrigerator and freezer compartments. For good circulation and maintenance of

proper cooling temperatures, do not block cold air vents with food items. Water

draining into the defrost water pan and hissing sounds are normal during the

automatic "Frost Free" cycle.

Energy Saving Ideas

C05C0063

Refrigerator midpoint

Freezer midpoint

Fresh Food Storage Shelf Adjustment

Refrigerator shelves are easily adjusted to suit individual needs. Before adjusting

shelves,removeallfood.Theshippingclipswhichstabilizetheshelvesforshipping

may be removed and discarded.

To adjust the cantilever shelves (shelves supported at the rear of the refrigerator),

lift the back of the shelf up and out. Replace shelf by inserting hooks at rear into

slots. Lower and lock into position. Some models have Spillsafe™ glass shelves,

which catch and hold accidental spills.

Door Storage

Doorbinsandshelvesareprovidedforconvenientstorageofjars,bottlesandcans.

Items used often are available for quick selection.

Thedoorbinscanbemovedtosuitindividualneeds.Removebinsbyliftingstraight

up. Place bins in the desired position and lower over the supports.

The Dairy compartment is warmer than the general food storage section and is

intended for short term storage of cheese, spreads, or butter.

Crisper

TheCrisperdrawer,locatedunderthebottomrefrigeratorshelf,isforstoringfruits

andvegetables.Mostproduceshouldbewashedinclearwateranddrainedbefore

placinginthisdrawer.Itemswithstrongodorsorhighmoistureshouldbewrapped

before storing.

The Humidity Control (some models) allows you to adjust the humidity within the

Crisperdrawer.Thiscanextendthelifeoffreshvegetableswhichkeepbestinhigh

humidity. Leafy vegetables, however, keep best when stored with the Humidity

Control set on HIGHER, or in a drawer without a Humidity Control. This keeps

incoming air to a minimum and maintains maximum moisture content.

Meat Keeper

The Meat Keeper is located at the bottom of the refrigerator. The temperature in

this compartment can be made colder than the rest of the refrigerator compart-

mentbyslidingtheChilledAir Control knob within theCOLDEST orCOLDrange.

Meat will be partially frozen and may be kept fresh longer than if stored on a

refrigerator shelf.

BeforeplacingitemsintheMeatKeeper,followthesestepstokeepthemeatfresh:

1. Carefully handle meat with clean hands and always keep the compartment

clean.

2. Store meat in its original wrapper. If necessary, overwrap in plastic wrap or foil

to prevent drying. Wrap fish tightly to prevent odor transfer to other foods.

3. If spoilage ever occurs, disinfect the compartment with liquid chlorine bleach

followinglabel directions. Then rinse with a solution of baking soda and water.

Rinse with clear water and dry.

Remove Shipping Clips

FRESH FRUITS & VEGETABLES

LOWER

FRUITS

HIGHER

HUMIDITY CONTROL

VEGETABLES

Humidity Control

Chilled Air Control Freezer Basket

A slide-out wire basket (some models have two) hangs below the bottom freezer

shelf. This basket provides easy access to frozen food packages.

Tall Storage Compartment(some models)

A shelf is attached to the freezer wall just below the ice server. This allows for

convenient storage of tall items placed vertically between the ice server and the

freezer wall.

Tall Storage

Compartment

Automatic Ice and

Water Dispenser Theiceandwaterdispenseronthefreezerdoorconvenientlydispenseschilledwater,

and either ice cubes or crushed ice, depending on the model.

To operate the dispenser, slide the knob to the selection of your choice and press

a glass against the dispensing arm, as shown. Be sure to hold the glass as far up as

possible to catch all ice. To stop dispensing, pull glass away from dispensing arm.

When dispensing ice, release the dispensing arm before the glass is full, but do not

remove the glass until the ice has completely dispensed.

Asmallheatedareabeneaththedispenserfloorcatchesandevaporatessmallspills.

This drip tray is removable and dishwasher safe. Do not pour water or excess

cubes into this area because there is no drain.

Light

The dispenser has a light which can be turned on and off by sliding the knob to the

desired position. The light also turns on automatically when ice and/or water is

dispensed. Replace light bulb with an appliance bulb of the same wattage.

How the Water Dispenser Works

The water tank is located behind the drawers in the refrigerator compartment. As

thewaterisdispensed,thetankisautomaticallyrefilled.Forproperoperationofthe

dispenser, the supply water pressure must fall between 30 psi and 120 psi.

After the refrigerator is installed and the plumbing connections are complete, the

water tank should be filled by drawing one glass of water. It may take

about 1-1/2 minutes after depressing the dispenser arm before water works its

way through the plumbing connections and begins to fill this first glass. Draw and

discard7moreglassestobesurethatthetankandplumbingconnectionsarerinsed

of any impurities. The water delivery system has a built in shut off device that will

stopthewaterflowafter3minutesofcontinuoususe.Simplyrelease the actuator

buttonto reset the dispensing mechanism.

To ensure fresh-tasting water, plan to use the dispenser every day. If the water

dispenser has not been used for a week or more, draw and discard 7-8 glasses to

freshen the tank supply.

How the Ice Dispenser Works

The ice maker and ice storage bin are located in the top left corner of the freezer

compartment. After the refrigerator is installed properly and has cooled for several

hours,the ice maker can begin making ice. To begin ice production, lower the wire

signalarmtothe"down"orONposition.Ascubesare made,theyare storedinthe

storagebin.Withnousageitwilltakeapproximately2daystofillthebin.However,

the dispenser may be used after the first batch of ice is made. The ice maker turns

off automatically when the ice storage bin is full.

Because of new plumbing connections, the first production of ice cubes may be

discolored or have an odd flavor. These should be discarded until the cubes made

are free of discoloration and taste. Remember that water quality

determines your ice quality. It is best to connect the ice maker to water that is not

softened. Chemicals from a malfunctioning softener can damage the ice maker.

If ice maker is connected to soft water, ensure the softener is maintained and

workingproperly.

To stop the ice maker, lift the wire signal arm until it clicks and locks in the "up"

or OFF position.

Dispenser Selector

Press glass against dispensing arm.

Do not use the ice

chute as a handle when removing

or replacing the ice storage bin.

Surfaces there may be sharp.

WARNING

Ice Dispenser Tips

1. Ice cubes stored too long may develop an odd flavor. Empty the container and

return it to the proper position. The ice maker will then produce more ice.

2. Occasionally shake the container to keep ice separated.

3. Ifthedispensingarmispushedinformorethan4minutes,thedispensermotor

may overload and stop. The overload protector will reset automatically after 3

or4 minutes. If a large quantityoficeisneededatonetime, it is best to remove

cubes directly from the ice storage bin.

4. Certain sounds are normal when the ice maker is operating. They are:

• Motor operation

• Ice being loosened from the tray

• Ice dropping into the storage bin

• Running water

• Water valve opening or closing

For more information on these operations, see Normal OperatingSounds.

5. Stop the ice maker when cleaning the freezer or for long vacations.

6. Iftheicemakeristobeturnedoffforalongperiodoftime,turnthewatersupply

valve to the closed position.

Automatic Ice and

Water Dispenser

(continued)

Cleaning the Ice Dispenser

Clean the dispenser and ice storage bin at regular intervals, particularly before you

take a vacation or move, or if the ice dispenser sticks.

1. Stop ice production by lifting the wire signal arm to the "up" or OFF position.

2. Remove ice storage bin by lifting up and out. Empty and carefully clean the bin

with milddetergent. Do not submerge the bin while cleaning. Rinse with clear

water. Do not use harsh or abrasive cleaners. Allow ice bin to dry completely

before replacing in the freezer.

3. Remove ice chips and clean the shelf and chute that supports the ice storage

bin.

4. Replace the ice storage bin. Lower the wire signal arm on the ice maker to the

"down" or ON position and the ice maker will resume production.

IMPORTANT: Whenremovingorreplacingtheicebin,donotrotatetheaugerin

theicebin.Iftheaugerisaccidentallyturned,youmustrealigntheaugerbyturning

it in 90° turns until the ice bin fits into place with the drive mechanism. For further

instruction, see the label on the ice bucket.

Remove and empty the ice storage bin if:

1. An extended power failure (one hour or longer) causes ice cubes in the ice

storage bin to melt and freeze together and jam the dispenser mechanism.

2. Theicedispenserisnotusedfrequently.Icecubeswillfreezetogetherinthebin

and jam the dispenser mechanism. Remove the ice storage bin and shake to

loosen the cubes.

NEVER use an ice pick or similar sharp instrument to break up the ice. This could

damage the ice storage bin and dispenser mechanism.

Repositioning the Auger

AUGER

DRIVER

MECHANISM

DO NOT PUT FINGERS UP ICE CHUTE.

SURFACES THERE MAY BE SHARP.

SystemStartup:

Water supply does not need to be turned off, however do not use ice and water

dispenserwhileinstallingfilter. RefertoFigure1asyoucompletetheseinstructions.

Thefiltercartridgehasalreadybeeninstalledinthefilterhousingatthefactory.Refer

to the How the Dispenser Works section to properly fill the system with water.

PureSourcePlus™ Ice and Water Filter (some models)

NOTE: If you purchased a refrigerator with a PureSource Plus™Ice and

Water filter, please read the following use and care information.

Thisice and water filtersystem filters water to your ice makerand water dispenser.

Itislocatedintheupperrightbackcornerofthefreshfoodcompartment(seeFigure

1 on the following page).

Ordernewfilter cartridgesthrough the

dealer where you bought the

refrigerator, or contact the Frigidaire

Consumer Assistance Center at 1-800-

944-9044. It might be good to order

some filters when you first install your

refrigerator. Be sure to ask for the RC-

200 PureSource Plus™ replacement

cartridge.

Automatic Ice and

Water Dispenser(continued)

Changing the Filter:

Waterquality variesthroughouttheworld. Toensure thehighestpossible

water quality, change water filter every 6 months, or 200 gallons. Also, if

filter has been in a refrigerator that has not been in use for awhile (during

moving for example), change filter before reinstalling refrigerator. Note

dispenser system will also operate without filtration (with filter cartridge

removed).

To change filter:

RefertoFigure1asneeded.Itisnotnecessarytoturn the water supply off

to change the filter.

1. Set ice maker lever (wire signal arm) to the OFF (up) position.

2. Hold filter cup firmly, and unscrew counter clockwise (Figure 1). (Some

watercouldleakoutasyou removecup.Thisisnormal.) Filtercartridge

shouldcomedownwithcup. Ifcartridgeremainsinhousing,pulldown

gently, while twisting filter back and forth.

3. Empty cup of any substance.

4. The large o-ring (Figure 1) that seals the filter system sets in the o-ring

groove down inside the cup. Should the o-ring fall out during filter

cartridge replacement, simply place it back in the groove prior to

screwingthecupbackinplace.Iftheo-ringbecomesdamaged,youwill

need to order a new one from the Consumer Assistance Center.

5. Discard old filter cartridge.

6. Remove new filter cartridge from packaging, and install.

7. Place filter cartridge in cup. The end with the small o-ring should be up,

out of the cup.

8. Screw cup, with filter, back onto housing. Do Not Use Wrench To

ReinstallCup.Filtercartridgewillself-alignascupistightened.Besure

cup is completely tightened with PureSource Plus ™ Logo facing

outward.Do Not Tighten Past Stop.

9. Set ice maker level on the ON (down) position.

10.Checkforleaks.Openrefrigeratordoor.Wipeanywaterdropsfromthe

filtercup. Run a glassof water. If there is a leak,unscrew filter cup, and

reinsert the filter cartridge. Check placement of large O-ring (see

Figure1). Reinstall filter cup, making certain it is tightened completely.

11.To condition filter system and purge air from water line, run several

glasses of water through water dispenser. This will also assure that the

purest water possible is stored in water tank.

The PureSource Plus™ RF-200 ice and

waterfiltersystemistestedandcertified

by NSF International, the nationally

recognizedandrespected,notforprofit,

certification organization for public

health safety. The PureSource Plus™

system is tested and certified to ANSI/

NSF Standards 42 and 53. See

performance data sheet for specific

claims.Thissystemshouldnotbeusedon

waterthatis microbiologicallyunsafe or

with water of unknown quality unless

the water has been adequately

disinfected before or after traveling

through the filtration system.

Rated service flow- .37 GPM

Maximum Rated Pressure- 125 PSI

Maximum Operating Temp. - 100°Figure1

Care and Cleaning Keepyourrefrigeratorandfreezercleantopreventodorbuild-up.Wipeupanyspills

immediately and clean both sections at least twice a year. Never use metallic

scouringpads,brushes,abrasivecleanersorstrongalkalinesolutionsonanysurface.

Do not wash any removable parts in a dishwasher.

Always unplug the power cord from the wall outlet before cleaning.

NOTE:TurningthecontroltoOFFdoesnotdisconnectpowertothecontrols,lightbulb,

orother electrical components.

Inside

Washinsidesurfacesoftherefrigeratorandfreezerwithasolutionof2tablespoons

baking soda in 1 quart warm water. Rinse and dry thoroughly. Be sure to wring

excesswateroutofspongeorclothbeforecleaningaroundthecontrols,light

bulb, or any electrical parts.

Washremovablepartssuchasshelvesanddrawerswithbakingsodasolutionormild

detergentandwarmwater.DoNotUseHarshCleanersOnTheseSurfaces.Rinse

anddrythoroughly.Cleanthedoorgasketswithmildsuds,rinsewithclearwaterand

wipedry. DoNot userazorbladesorothersharpinstrumentswhichcanscratchthe

appliance surface when removing adhesive labels. Any glue left from the tape or

energy label can be removed with a mixture of warm water and mild detergent, or,

touch the glue with the sticky side of tape already removed. Do Not Remove The

SerialPlate.

Outside

Washthecabinetandhandleswithwarmwaterandmildliquiddetergent.Rinsewell

and wipe dry with a clean soft cloth. Do not use commercial household cleaners,

ammonia, or alcohol to clean handles.

Removeanydustordirtfrom the front of the toe grille using avacuumcleanerwith

itsdustingtoolattachment.Removethetoegrillebypullingitstraightout.Whilethe

grille is removed, vacuum the backside of the grille and wipe with a sudsy cloth or

sponge. Periodically clean the condenser (black tubes and wires beneath the

refrigerator,behindthetoegrille).Donotallowlintordusttoaccumulateonthecoils.

Insert a long handled brush or vacuum attachment between the two coils to bring

thelintforward.Toreplacethetoegrille,lineuptabswithholesandpushgrillestraight

on. Use caution when cleaning in the area of the coils. Surfaces

there may be sharp.

The air vents on the lower access panel at the rear of the refrigerator should be

cleanedperiodically.Cleantheventsbyusingavacuumcleanerwithitsdustingtool

attachment. When moving the refrigerator, pull straight out. Do not shift the

refrigeratorfromsidetosideasthismay tearorgougethefloorcovering.Becareful

not to move the refrigerator beyond plumbing connections.

Damp objects stick to cold

metalsurfaces. Do not touch refrigerated

surfaces with wet or damp hands.

To avoid damage and help

the refrigerator run as efficiently as

possible, clean the condenser and air

vents periodically.

Air Vents on Lower Access Panel

Replacing the Light Bulb

To replace the light bulb in either compartment:

1. Unplug the refrigerator.

2. Wear gloves as protection against possible broken glass.

3. Replace old bulb with an appliance bulb of the same wattage.

4. Remember to plug the refrigerator back in.

Vacation and Moving Tips

Short vacations:

• Leave refrigerator operating during vacations of 3 weeks or less.

• Use up all perishable items in refrigerator section.

• Wrap and store other items in the freezer.

• Turn off automatic ice maker, even if you will be gone just a few days.

Andere Handbücher für FRS26ZXHW2

Inhaltsverzeichnis

Andere Frigidaire Kühlschrank Handbücher

Frigidaire

Frigidaire FRS23LH5D Bedienungsanleitung

Frigidaire

Frigidaire FGUB2642LE Montageanleitung

Frigidaire

Frigidaire FRT15G4B Bedienungsanleitung

Frigidaire

Frigidaire FRT21FG4C Bedienungsanleitung

Frigidaire

Frigidaire FRS26RLEC Bedienungsanleitung

Frigidaire

Frigidaire FRS20ZGG Bedienungsanleitung

Frigidaire

Frigidaire FREEZER/REFRIGERATOR GLASS DOOR REFRIGERATOR Bedienungsanleitung

Frigidaire

Frigidaire FGTC2349K S Bedienungsanleitung

Frigidaire

Frigidaire PLHS239ZD Bedienungsanleitung

Frigidaire

Frigidaire FRT21GNHW0 Bedienungsanleitung

Frigidaire

Frigidaire FRS26W2BS Bedienungsanleitung

Frigidaire

Frigidaire Gallery DGUS2635L Betriebsanleitung

Frigidaire

Frigidaire FRT15B3J Bedienungsanleitung

Frigidaire

Frigidaire GLRT187TA Bedienungsanleitung

Frigidaire

Frigidaire Refrigerator Benutzerhandbuch

Frigidaire

Frigidaire FRS6R5ES Bedienungsanleitung

Frigidaire

Frigidaire FGHS2369K Bedienungsanleitung

Frigidaire

Frigidaire FRT14G4B Bedienungsanleitung

Frigidaire

Frigidaire FRU17B2JW0 Bedienungsanleitung

Frigidaire

Frigidaire FPUI2188LF Bedienungsanleitung

Frigidaire

Frigidaire FRT18S6AQ0 Bedienungsanleitung

Frigidaire

Frigidaire FRS26R4A Bedienungsanleitung

Frigidaire

Frigidaire FRS3LR5E Bedienungsanleitung

Frigidaire

Frigidaire R134a Benutzerhandbuch

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung

Teledyne

Teledyne 6712FR and Betriebsanleitung