Frigidaire FRT21HS8PS Bedienungsanleitung

TABLE OF CONTENTS

www.frigidaire.com USA 1-800-944-9044 www.frigidaire.ca Canada 1-800-265-8352

All about the

Use &Care

of your Refrigerator

Important Safety Instructions......................2

Installation ................................................4

Connecting Water Supply............................5

Door Removal Instructions..........................7

Temperature Controls ...............................13

Ice Service...............................................14

Normal Operating Sounds & Sights............15

Care and Cleaning....................................16

Before You Call ........................................18

Warranty .................................................19

241857202 (May 2010)

WARNING

WARNING indicates a potentially hazardous

situation which, if not avoided, could result

in death or serious injury.

IMPORTANT

IMPORTANT indicates installation, operation

or maintenance information which is

important but not hazard-related.

DANGER

DANGER indicates an imminently hazardous

situation which, if not avoided, will result in

death or serious injury.

Denitions

This is the safety alert symbol. It is used to

alert you to potential personal injury hazards.

Obey all safety messages that follow this

symbol to avoid possible injury or death.

Doors

Handles are secure and tight

Door seals completely to cabinet on all

sides

Freezer door is level across the top

Leveling

Refrigerator is level, side-to-side and

tilted 1/4” (6mm) front-to-back

Toe grille is properly attached to

refrigerator

Cabinet is setting solid on all corners

Electrical Power

House power turned on

Refrigerator plugged in

Ice Maker

House water supply connected to

refrigerator

No water leaks present at all

connections - recheck in 24 hours

Ice maker is turned ON

Ice & water dispenser operates

correctly

 Frontltermustbeushwithlter

housing (select models)

Final Checks

Shipping material removed

Fresh food and freezer temperatures

set

Crisper humidity controls set

Registration card sent in

Installation Checklist

CAUTION

CAUTION indicates a potentially hazardous

situation which, if not avoided, may result in

minor or moderate injury.

IMPORTANT SAFETY INSTRUCTIONS

For your Safety

• DO NOT store or use gasoline, or other

ammableliquidsinthevicinityofthisor

any other appliance. Read product labels

forwarningsregardingammabilityand

other hazards.

• DO NOT operate the refrigerator in the

presence of explosive fumes.

• Avoid contact with any moving parts of

automatic ice maker.

• Remove all staples from the carton. Staples

can cause severe cuts, and also destroy

nishesiftheycomeincontactwithother

appliances or furniture.

WARNING

Please read all instructions before using this

refrigerator.

Child Safety

Destroy or recycle the carton, plastic bags, and

any exterior wrapping material immediately

after the refrigerator is unpacked. Children

should never use these items to play. Cartons

covered with rugs, bedspreads, plastic sheets

or stretch wrap may become airtight chambers,

andcanquicklycausesuffocation.

IMPORTANT SAFETY INSTRUCTIONS

Grounding type

wall receptacle

Do not, under

any circumstances,

cut, remove,

or bypass the

grounding prong.

Power cord with

3-prong gounded plug

Electrical information

• The refrigerator must be plugged into its

own dedicated 115 Volt, 60 Hz., 15 Amp,

AC only electrical outlet. The power cord of

theapplianceisequippedwithathree-

prong grounding plug for your protection

against electrical shock hazards. It must be

plugged directly into a properly grounded

three prong receptacle. The receptacle

must be installed in accordance with local

codesandordinances.Consultaqualied

electrician. Avoid connecting refrigerator to

a Ground Fault Interrupter (GFI) circuit. Do

not use an extension cord or adapter plug.

• If the power cord is damaged, it should

be replaced by an authorized service

technician to prevent any risk.

WARNING

These guidelines must be followed to ensure

that safety mechanisms in this refrigerator

will operate properly.

IMPORTANT

Pressing and holding the On/Off button

for three (3) seconds, located on the left

side of the temperature control panel

(Electronic controls), or turning the Freezer

and Fresh Food controls to “0” (Mechanical

controls) will disable your refrigerator’s

cooling system, but does not disconnect the

power to the light bulb and other electrical

components. To turn off power to your

refrigerator you must unplug the power cord

from the electrical outlet.

CAUTION

To avoid personal injury or property

damage, handle tempered glass shelves

carefully. Shelves may break suddenly if

nicked, scratched, or exposed to sudden

temperature change.

• Never unplug the refrigerator by pulling on

thepowercord.Alwaysgriptheplugrmly,

and pull straight out from the receptacle to

prevent damaging the power cord.

• Unplug the refrigerator before cleaning

and before replacing a light bulb to avoid

electrical shock.

• Performance may be affected if the voltage

varies by 10% or more. Operating the

refrigeratorwithinsufcientpowercan

damage the compressor. Such damage is

not covered under your warranty.

• Do not plug the unit into an electrical outlet

controlled by a wall switch or pull cord to

prevent the refrigerator from being turned

off accidentally.

Proper Disposal of your

Refrigerator or Freezer

Risk of child entrapment

Child entrapment and suffocation are not

problems of the past. Junked or abandoned

refrigerators or freezers are still dangerous

– even if they will sit for “just a few days”. If

you are getting rid of your old refrigerator or

freezer, please follow the instructions below to

help prevent accidents.

Proper Disposal of Refrigerators/Freezers

We strongly encourage responsible appliance

recycling/disposal methods. Check with your

utility company or visit

www.recyclemyoldfridge.com for more

information on recycling your old refrigerator.

Before you throw away your old refrigerator/

freezer:

• Remove doors.

• Leave shelves in

place so children

may not easily

climb inside.

• Have refrigerant

removed by a

qualiedservice

technician.

Raise

Stationary

Front

Roller with

Leveling

Screw

(some

models)

ThisUse&CareManualprovidesspecic

operating instructions for your model. Use the

refrigerator only as instructed in this Use & Care

Manual. Before starting the refrigerator,

follow these important rst steps.

Location

• Choose a place that is near a grounded

electrical outlet. Do Not use an extension

cord or an adapter plug.

• If possible, place the refrigerator out of

direct sunlight and away from the range,

dishwasher or other heat sources.

• Therefrigeratormustbeinstalledonaoor

that is level and strong enough to support

a fully loaded refrigerator.

• Consider water supply availability for models

equippedwithanautomaticicemaker.

Installation

Installation Clearances

• Allow the following clearances for ease

of installation, proper air circulation, and

plumbing and electrical connections:

Sides & Top 3/8”

Back 1”

Raise

Adjustable

Front

Roller

(some

models)

Door Opening

Your refrigerator should be positioned to allow

easy access to a counter when removing food.

Leveling

All four corners of your refrigerator must rest

rmlyonasolidoor.Yourrefrigeratoris

equippedwithadjustablefrontrollersorfront

leveling screws to help level your unit.

To Level Your Refrigerator:

1. Remove toe grille.

2. Useat-blade

screwdriver

or 3/8” socket

wrench to adjust

front rollers.

Use adjustable

wrench to adjust

leveling screws.

INSTALLATION

To make this possible, the direction in which

the doors open can be reversed. See Door

Removal & Reversal Instructions.

CAUTION

Do Not install the refrigerator where the

temperature will drop below 55°F (13°C) or

rise above 110°F (43°C). The compressor

will not be able to maintain proper

temperatures inside the refrigerator.

Do Not block the toe grille on the lower front

ofyourrefrigerator.Sufcientaircirculation

is essential for the proper operation of your

refrigerator.

IMPORTANT

If you install your refrigerator in a garage or

other unheated area, you may experience

freezer temperature problems during the winter

months when temperatures dip below 55° F.

Upgrading your refrigerator with a Garage

Kit will lower the minimum operating

temperature of your unit to 34° F. This

kit can be ordered through the Electrolux

Solutions Hotline (see back cover).

NOTE

If you see black coils/tubing on the back

of your refrigerator (air-cooled condenser)

leave 3” clearance at top of refrigerator.

NOTE

If your refrigerator is placed with the door

hinge side against a wall, you may have to

allow additional space so the door can be

opened wider.

NOTE

Raise the front of the refrigerator enough so

the doors close freely when opened halfway.

The refrigerator should slope ¼” to ½” from

front to back. Then level the refrigerator

from side to side.

Before Installing The Water Supply Line, You

Will Need:

• Basic Tools: adjustablewrench,at-blade

screwdriver, and PhillipsTM screwdriver.

• Access to a household cold water line with

water pressure between 30 and 100 psi.

• A water supply line made of ¼ inch (6.4

mm) OD, copper or stainless steel tubing.

To determine the length of tubing needed,

measure the distance from the ice maker

inlet valve at the back of the refrigerator

to your cold water pipe. Then add

approximately 7 feet (2.1 meters), so the

refrigerator can be moved out for cleaning

(as shown).

CONNECTING WATER SUPPLY

• A shutoff valve to connect the water supply

line to your household water system. DO

NOT use a self-piercing type shutoff valve.

• A compression nut and ferrule (sleeve) for

connecting a copper water supply line to

the ice maker inlet valve.

WARNING

To avoid electric shock, which can cause

death or severe personal injury, disconnect

the refrigerator from electrical power before

connecting a water supply line to the

refrigerator.

CAUTION

To Avoid Property Damage:

• Copperorstainlesssteelbraidedtubingis

recommended for the water supply line.

Water supply tubing made of ¼” plastic is

not recommended to be used. Plastic tubing

greatly increases the potential for water

leaks, and the manufacturer will not be

responsible for any damage if plastic tubing

is used for supply line.

• DONOTinstallwatersupplytubingin

areas where temperatures fall below

freezing.

• Chemicalsfromamalfunctioningsoftener

can damage the ice maker. If the ice

maker is connected to soft water, ensure

that the softener is maintained and

working properly.

IMPORTANT

Ensure that your water supply line connections

comply with all local plumbing codes.

NOTE

Check with your local building authority

for recommendations on water lines and

associated materials prior to installing your

new refrigerator. Depending on your local/

state building codes, Electrolux recommends

for homes with existing valves its Smart

Choice water line kit 5305513409 (with

a 6 ft. stainless steel water line) and for

homes without an existing valve, Frigidaire

recommends its Smart Choice water line

kit 5304410264 (with a 20 ft. copper water

line with self-tapping saddle valve). Please

refer to www.frigidaire.com/store for more

information.

Plastic Water Tubing

to Ice Maker

Fill Tube

Steel

Clamp

Brass

Compression

Nut

Ferrule

(Sleeve)

Copper

water line

Water Valve

Bracket

Valve Inlet

Water Valve

Copper water line

from household

water supply

(Include enough tubing in loop to allow

moving refrigerator out for cleaning.)

Steel

Clamp

Stainless

Steel

water line

Water Valve

Bracket

Valve Inlet

Water Valve

6 ft. Stainless Steel water line

from household water supply

Plastic Water Tubing

to Ice Maker

Fill Tube

Figure 1

Figure 2

CONNECTING WATER SUPPLY

To Connect Water Supply Line To Ice Maker

Inlet Valve

1 Disconnect refrigerator from electric power

source.

2 Place end of water supply line into sink or

bucket.TurnONwatersupplyandush

supply line until water is clear. Turn OFF

water supply at shutoff valve.

3 Remove plastic cap from water valve inlet

and discard cap.

4 If you use copper tubing - Slide brass

compression nut, then ferrule (sleeve)

onto water supply line. Push water supply

line into water valve inlet as far as it

will go (¼ inch/6.4 mm). Slide ferrule

(sleeve)intovalveinletandngertighten

compression nut onto valve. Tighten

another half turn with a wrench; DO NOT

over tighten. See Figure 1.

If you use stainless steel tubing - The

nut and ferrule are already assembled on

the tubing. Slide compression nut onto

valveinletandngertightencompression

nut onto valve. Tighten another half turn

with a wrench; DO NOT over tighten. See

Figure 2.

5 With steel clamp and screw, secure water

supply line (copper tubing only) to rear

panel of refrigerator as shown.

6 Coil excess water supply line (copper

tubing only) about 2½ turns behind

refrigerator as shown and arrange coils so

they do not vibrate or wear against any

other surface.

7 Turn ON water supply at shutoff valve and

tighten any connections that leak.

8 Reconnect refrigerator to electrical power

source.

9 To turn ice maker on, lower wire signal

arm (side mounted) or set the ice maker’s

On/Off power switch to the “I” position

(rear mounted).

DOOR REMOVAL / REVERSAL INSTRUCTIONS

Door Stop

Screw Handle

Screw

Top

Hinge

Screw Center

Hinge

Screw

Bottom

Hinge

Screw

NOTE

If you have stainless steel doors, see

Removing Stainless Steel Doors and Handles

section.

The direction in which your refrigerator

doors open (door swing) can be reversed,

from left to right or right to left, by moving

the door hinges from one side to the

other. Reversing the door swing should be

performedbyaqualiedperson.

IMPORTANT

Before you begin, turn the refrigerator

temperature control to “0” and remove the

electrical power cord from the wall outlet.

Remove any food from door shelves.

(OR)

Tools Necessary:

Phillips™ head

Quadrex™ head

screwdriver

Socket

Wrench Set

Adjustable

Wrench

Awl

Pliers

Plastic

Putty

Knife

Door removal and reversal

instructions:

1. Remove toe grille.

2. Remove top hinge cover. Trace around the

hinge with a soft lead pencil. This makes

reinstallation easier. Remove top hinge

and lift door off center hinge pin. Set door

aside.

3. Unscrew center hinge pin using adjustable

wrench and save for reassembly. Ensure

plastic washer stays on hinge pin.

4. Lift refrigerator door off of bottom hinge

and set aside.

5. Remove center hinge and shim by

removing inside screw and loosening two

outside screws enough to allow hinge and

shim to slide out. Tighten screws.

6. Loosen two outside screws on opposite

side of refrigerator, remove inside screw

and install center hinge.

7. Remove two screws on bottom hinge with

3/8” socket wrench.

8. Install bottom hinge on opposite side with

the two screws removed from step 7.

9. Unscrew bottom hinge pin using

adjustable wrench. Move hinge pin to

other hole in hinge and tighten with

adjustable wrench.

10. Reverse door handles (see instruction on

next page).

11. Move freezer and refrigerator door stops

to opposite side. Before starting screws,

use an awl to puncture the foam.

12. Position refrigerator door onto bottom

hinge pin and screw center hinge pin

through center hinge into top of door. Close

refrigerator door to help align hinge hole.

13. Tighten center hinge pin with adjustable

wrench.

14. Remove cabinet and hinge hole plugs and

move to opposite side.

15. Lower freezer door onto center hinge pin.

16. Close freezer door. Have an assistant

lift up on opposite side of door while

tightening screws to install top hinge.

17. Flip toe grille and reinstall.

18. Plug in electrical power cord and turn

refrigerator temperature control to center

position. Adjust setting as necessary.

Door Stop

Screw

Door

Stop

Washer

Hinge

Center

Hinge

Handle

Hole

Plugs

Shim

Screws

Hinge Hole

Plug

Washer

Hinge

Bottom

Hinge

Screws

Toe

Grille

Door Stop

Screw Door

Stop

Top Hinge

Cover

Top Hinge

DOOR REMOVAL / REVERSAL INSTRUCTIONS

To Remove Freezer Handle:

(Handles may be easier to reverse while doors

are off.)

1. Remove two screws attaching handle to

bottom of freezer door.

2. Remove short trim piece by sliding trim

straight up and off of handle bracket.

3. Remove screw attaching top of handle to

door.

4. Self-Adhesive Nameplate Models: Gently

peel off nameplate from door and reapply

over old handle holes.

To attach freezer handle:

1. Reinstall handle on opposite side, using

same hole as nameplate.

2. Attach handle to bottom of door.

3. Slide trim piece straight down onto handle

bracket.

To Remove Freezer Handle:

(Handles may be easier to reverse while doors

are off.)

1. Remove two screws attaching handle to

bottom of freezer door.

2. Remove button plug using edge of putty

knife.

3. Remove screw on side of freezer door and

remove handle.

Nameplate

Trim

Screw

Handle

Self Adhesive

Nameplate

(some models)

Screw

NOTE

Some models have “pocket” handles, which are

recessed into the sides of the door. On these

models, only the hinges will need to be reversed.

Handle

Button

Plug

Screw

To attach freezer handle:

1. Secure side of handle to door and replace

button plug.

2. Secure handle to bottom of door.

Self Adhesive

Nameplate

(some models)

Nameplate

Dovetail

Button

Screw

Handle

Screw

Lock Handle

over

Dovetail Button

Trim Removal (full-length trim

models only)

In some models, the refrigerator door has a

full length trim piece which continues from

the bottom of the handle to the bottom of

the door. The top of the trim attaches to the

handlebracket(Figure1)ortsaroundthe

base of the handle (Figure 2). An adhesive

“trim lock” is positioned about halfway down.

The bottom of the trim is held in place by

either an adhesive trim lock, or a trim lock with

two prongs inserted into a hole on the face of

the door.

To Remove Trim:

1. Remove trim by gently pulling trim lock

areas out and away from door.

2. When trim is free from door, slide the

trim straight down and away from base of

handle.

To Remove Freezer Handle:

(Handles may be easier to reverse while doors

are off.)

1. Remove two screws attaching handle to

bottom of freezer door.

2. Swing bottom of handle away from the

door and slide handle straight up and off

of dovetail button.

3. Remove screw and dovetail button and

install on other side, using the same holes

as nameplate.

4. Self-Adhesive Nameplate Models: Use

putty knife to gently peel off nameplate

from door and reapply over old handle

holes.

To attach freezer handle:

1. Start with handle offset away from door.

Place top of handle over dovetail button,

swing handle into upright position and pull

downward, locking it into place.

2. Secure bottom of handle with two screws

removed earlier.

DOOR REMOVAL / REVERSAL INSTRUCTIONS

NOTE

For models with short handle trim, remove

by sliding trim straight down and off of

handle bracket.

Inhaltsverzeichnis

Andere Frigidaire Kühlschrank Handbücher

Frigidaire

Frigidaire FRT21KR7E Bedienungsanleitung

Frigidaire

Frigidaire FRT21KG3C Bedienungsanleitung

Frigidaire

Frigidaire FRT18FG3D Bedienungsanleitung

Frigidaire

Frigidaire FRT18B4A Bedienungsanleitung

Frigidaire

Frigidaire FFHT10F2L ?W Bedienungsanleitung

Frigidaire

Frigidaire FPCI-206T-8 Bedienungsanleitung

Frigidaire

Frigidaire FRS24WSG Bedienungsanleitung

Frigidaire

Frigidaire FFPH45F4LM Bedienungsanleitung

Frigidaire

Frigidaire FGHC2378LE Bedienungsanleitung

Frigidaire

Frigidaire FRT15A2D Bedienungsanleitung

Frigidaire

Frigidaire FRT21HP5A Bedienungsanleitung

Frigidaire

Frigidaire FRT18G5A Bedienungsanleitung

Frigidaire

Frigidaire GLRT86TE Bedienungsanleitung

Frigidaire

Frigidaire FPUS2698LF Montageanleitung

Frigidaire

Frigidaire FRS23H5DS Bedienungsanleitung

Frigidaire

Frigidaire FRT21C5A Bedienungsanleitung

Frigidaire

Frigidaire FGUN2642LP Bedienungsanleitung

Frigidaire

Frigidaire FRT18IL6D Bedienungsanleitung

Frigidaire

Frigidaire FGRU19F6QF Bedienungsanleitung

Frigidaire

Frigidaire FRT21G4B Bedienungsanleitung

Frigidaire

Frigidaire EFR492-B-6COM Bedienungsanleitung

Frigidaire

Frigidaire FRS26LH5D Bedienungsanleitung

Frigidaire

Frigidaire FSC23F7HB Bedienungsanleitung

Frigidaire

Frigidaire DGUS2645LF Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung

Teledyne

Teledyne 6712FR and Betriebsanleitung