12
Lan Settings WiFi 2.4G finish
Lan Settings
IP address
Subnet mask
Next
192.168.10.1
255.255.255.0
English Logout
Users
status information
Wizard
System
Firewall
Network
2.4G wireless
Advanced setting
Prev Next
Enter or 8-32 Characters
1 2
Lan Settings WiFi 2.4G finish
SSID
Password
Bandwidth
Country
Channel
20MHz
China
auto
Users
status information
Wizard
System
Firewall
Network
English Logout
FS.COM
3.5 Click AP mode and set up IP Address and Subnet Mask. The
IP address and Subnet mask should be within same network
segment as upper network and can’t be conflict with IP address
from upper network router. After setting, you can visit the device
from the IP address that you have set just now by connecting
internet with WAN port of the device.
Notes: ①In AP mode, the IP address from the other devices connected to the AP will
be allocated by the upper network router.
②According to the defaulted setting, there is no need to change IP address. If you
want to manage the device, just manually set IP address in the computer.
3.6 AP Mode: You can set up wireless SSID, password and
channel in advanced settings. After setting, other mobile devices
can connect the device SSID to surf the internet.
