FUHR SmartTouch 2.0 Installationsanleitung

WWW.FUHR.DE

www.fuhr.de

Master SmartKey

SmartKey

Smart radio module

Sensor

SmartTouch

2.0

These instructions are to be passed

on by the ﬁtter to the user.

Manuals in further languages, see www.fuhr.de

Access control system with KeylessGo technology

Installation, operating and maintenance manual

MBW26a-EN/04.20-3

Door handles

WWW.FUHR.DE

SmartTouch

2.0

SmartTouch 2.0 is a state-of-the-art access control system with KeylessGo technology. It allows the convenient,

keyless opening of front doors equipped with the FUHR motorised locks autotronic 834, autotronic 836 or

multitronic 881. The motor locks are unlocked just by touching the door handle at any position (or alternatively

the sensor) in combination with an active SmartKey.

1.1 Scope of delivery

SmartTouch 2.0 door handles set:

• Smart radio module with connecting cable

• 750 mm extension cable

• Stainless steel door handles with ﬁxing screws

• Master SmartKey

• Installation and operating manual

Optional accessories:

• Mounting set for surface-covering door panels

(Art.-Nr.: VNBZB2460069 / Reference:

VNBZB2460069)

Please order separately:

• User SmartKey (Art.-Nr.: 9366938 / Reference:

VNZ80275)

1.2 Function

SmartTouch allows you the convenient door opening via KeylessGo technology. Therefore it is sufﬁcient to carry

a tuned in SmartKey and to move it. For unlocking the door by the motorised lock, simply touch the door handle

(or sensor). The Smart radio module installed into the door leaf now sends a radio signal, which is received and

answered by the tuned in SmartKey. The Smart radio module checks the opening authorization of the SmartKey

and then unlocks the motorised lock.

If the KeylessGo function is not desired, it can be disabled for each individual SmartKey or completely for all, see

chapter 6.1 for more information. The door can then still be operated via the SmartKey's transmit button.

The SmartTouch door handle has an LED which is controlled by a sensor. This lights up brieﬂy when the door han-

dle is touched and provides orientation. In the darkness the LED lights up permanently. The brightness and size of

the light cone depends on the length of the handle bar and the mounting height.

1.3 Number of tuned in SmartKeys

The memory of the smart radio module is conﬁgured for up to 200 SmartKeys. As soon as the memory is full, the

tuning in process is cancelled and no further SmartKey can be paired.

1.4 Power failure

A power failure has no effect on the stored SmartKeys. Opening the door automatically cannot be effected.

We generally recommend the installation of a mechanical locking cylinder in order to ensure that access

is possible at any time independent of the power supply.

1 General information

SmartTouch 2.0 sensor set:

• Smart radio module with connecting cable

• Sensor with 750 mm connecting cable and

ﬁxing screws

• Stainless steel cover

• Master SmartKey

• Installation and operating manual

WWW.FUHR.DE 3

SmartTouch

2.0

2 Functions of the individual components

2.1 SmartKeys

SmartKeys are battery-powered electronic keys. Besides the KeylessGo function all SmartKeys have additionally

4 transmit buttons for remote control. The SmartTouch system differentiates between master SmartKey for tuning

in and deleting, and user SmartKey for door opening.

• Master SmartKey

The master SmartKey included in the scope of delivery is paired with the Smart

radio module at the factory and cannot be changed. With the upper button, Smart-

Keys are tuned in to the Smart radio module, deleted and the radio range is set.

The Master SmartKey cannot be replaced and must therefore

be stored in a safe place! Do not use it for daily door opening, but

only for tuning in and deleting the user SmartKeys.

• SmartKey

The SmartKey is intended for regular door opening via the KeylessGo function or

optionally via the transmit button. The other buttons can be tuned in to additional

Smart radio modules by using the separately available FUHR SmartConnect. This

allows, for example, the control of a garage door or a radio socket.

2.2 Smart radio module

The Smart radio module receives the signal from the SmartKey and transmits it as

an opening impulse to the motorised lock. By pressing the integrated programming

button with green LED light the process of tuning in, deleting and adjusting the

radio range will be started. The memory of the Smart radio module can hold up to

200 SmartKeys. These remain permanently stored even if the operating voltage is

interrupted.

When the Smart radio module is placed into operation (e.g. supplied

with power) for the ﬁrst time, its electronic components need around

20 seconds to become charged with electrical energy. During this time it

is not possible to open the door using the system’s SmartTouch function.

Pairing and

deleting button

Programming

button with LED

Transmit

button

WWW.FUHR.DE

SmartTouch

2.0

3 Installation

3.1 Important installation advices

3.1.1 Screws and drilling holes

I II

Thread cutting ﬁxing

screw

Fixing screw with

cable hole

45°

98,4

3.1.2 Advices for the door handle installation

PVC proﬁles

Aluminium proﬁles

Timber proﬁles

98,4 98,4

350/1000/1600

WWW.FUHR.DE 5

SmartTouch

2.0

V+

V-

3.2 Installation of the Smart radio module

Place the Smart radio module on top of the motorised drive mechanism and push it

down carefully until it clicks in place. There are two cables at the back of the Smart

radio module. The short cable "A" is the connecting cable to the door handle or

sensor.

Now connect the cables as follows:

Cable A: The short cable ends in a plug. Connect it with the extension cable of

the door handle or the connecting cable of the sensor. See chapter 3.4.

Cable B: The long 2-core cable ends in a plug. Insert this plug into the plug socket

on the back of the motor. Through this cable, a feedback on the door

status can be sent to the separately available SmartConnect and received

via app.

Cable C: Connect the 3 outgoing cables to the motor plug as follows:

Terminal 4: white cable

Terminal 5: brown cable

Terminal 6: green cable

3.3 Installing the optional LED indicator for the outside of the

door

The control LED (Art.-Nr. 9187229 / Reference: VNZ80067) is used to visually

indicate the locking status of the door. For

installation, connect the plug at the end of the cable of the LED with the plug

socket on the back of the Smart radio module. The motorised lock can then be

inserted into the door leaf proﬁle.

Please ensure that there are no kinks in the cables and that they

are not squeezed or pulled.

3.1.3 Important advice for power supply

For proper functioning of the SmartTouch, a power supply unit with a

passage between the protective earth conductor on the input side (green/

yellow, PE 230V AC) and the earth cable on the output side (black,

12 V DV) is absolutely necessary.

Inform your electrician.

All FUHR transformers (12V DC/230V AC) installed in the door frame are already

carried out for this purpose and can be used without hesitation.

WWW.FUHR.DE

SmartTouch

2.0

3.4 Installation of the SmartTouch door handle

3.4.1 On Aluminium, wood or PVC profiles

200/800/1400

Make a cross drill hole for the

Smart radio module on the

bottom screw hole.

1.1

Additional step at timber proﬁles:

Drill hole for ﬁxing screw

Avoid damage of lockcases and cables

at all costs!

Plug all cables together.

For the correct connectionof the

smart radio module see chapter

3.2.

Connecting

cable

Smart radio

module cablel

Cable to motor

SW13

Ø 8,5 mm

Screw drill holes with 8,5 mm Ø on desired

position.

We recommend choosing the drill hole

positions so that the centre of the door handle

is at 1,300 mm. The position of the lockcases

or a sufﬁcient thickness of the proﬁle must be

considered, see picture I and II in chapter 3.1.1.

On timber proﬁles there has to be a cross drill addi-

tionally. See step 1.1 in the picture below.

Pre-cut the thread with fastening screw A, please

grease the screw beforehand (for PVC proﬁles with

steel reinforcement please pre-cut with an M10

tap), unscrew it and screw in ﬁxing screw B.

Screw and tighten ﬁxing screw A.

1.1

WWW.FUHR.DE 7

SmartTouch

2.0

Pull extension

cable trough

the cable hole

of the ﬁxing

screw B.

Please ensure that there are no kinks

in the cables and that they are not

squeezed or pulled.

Plug the extension cable to the cable of

the door handle electronics and push it

back into the door handle or proﬁle as

far as possible.

Carefully put the door handle on

the ﬁxing screws.

Tighten the grub screws

of the door handle.

7. 8.

SW 3

WWW.FUHR.DE

SmartTouch

2.0

3.4.2 On surface covering door panels

For installation on surface covering doopr panels you need FUHR's mounting set Art.-Nr. 9367768 / Referenz:

VNBZB2460069.

10 mm

45 mm

20 mm

45 mm

> 30 mm

Ø 40 mm

26 mm

Reserve loop

Cable to

Smart radio device

Put both panel halves on top of each other and

drill both holes on the desired handle height with

10 mm Ø.

For both holes, mill a 45 x 45 mm pocket with

20 mm depth (6 mm milling cutter). Drill hole and

milling have the same centre.

Pass the extension cable through the protective tube

and put the reserve loop into the hole of 40 mm Ø.

Push the end of the cable through the centre of the

mounting proﬁle.

Remove the upper half of the panel and mill a

26 mm deep hole with 40 mm Ø at hole B.

The panel needs to have a thickness of at least

30 mm.

Press the mounting proﬁle in pockets Aand Binto

the ﬁlling foam glue.

Hole for the

reserve loop

10 mm

Sizes in cross-section

Drill in the centre of pocket Ba lateral cable hole

with 10 mm Ø into the door panel and insert the

supplied protective tube.

Passage in the direction of

the Smart radio module

Ø10 mm

minimum

34 mm

9 mm

10 mm

20 mm

WWW.FUHR.DE 9

SmartTouch

2.0

SW13

Place the loose panel half on top, insert the cable

through the hole and glue both panel halves

together.

7. Pull the cable through the supplied ﬁxing screw with

cable hole and screw it in (B). Afterwards screw in the

other ﬁxing screw in hole A.

SW 3

Plug the extension cable to the electricity cable of

the handle and push it back into the door

handle or the proﬁle as far as possible.

Screw in and ﬁx the grub screws of the handle.

11.

Carefully put the door handle on the ﬁxing screws.

Be careful not to

pinch or kink the

cable.

10.

WWW.FUHR.DE

SmartTouch

2.0

200

Cable A

Connecting cable

stainless steel

cover

Fit the cover with

the recess pointing

downwards

Hole Ø 8 mm

for connecting

cable

3.5 Installing the SmartTouch sensor

The sensor is made of a black plastic casing with connecting cable and a stainless steel cover.

Fit the sensor to the outside of the door leaf using the screws supplied. Finally the stainless steel cover is glued on.

For installing the sensor proceed as follows:

1. Mill a 20 x 20 mm opening 200 mm above the door handle hole into the outer proﬁle wall of the door leaf.

Deburr the milling carefully.

2. Guide the connection cable through the opening downwards to the milling of the motor drive.

3. Plug the connecting cable to cable A of the Smart radio module.

4. Screw in the plastic casing of the sensor with the supplied screws into the proﬁle.

5. Clean the adhesive areas of the plastic casing to ensure a perfect hold.

6. Now remove both strips of the protective ﬁlm from the back of the stainless steel cover.

7. Finally, press the cover ﬁrmly onto the plastic casing.

20 mm

35mm

plastic

casing

Tapped drill holes in

aluminium proﬁle for

M3x8: 2,6 - 2,7 mm

M3x8 for

Aluminium and

PVC proﬁles

3x20 for timber

proﬁles

20 mm

Pocket:

at least 25 mm

deep

Inhaltsverzeichnis

Andere FUHR Steuerungssystem Handbücher

FUHR

FUHR VNB968 Installationsanleitung

Beliebte Steuerungssystem Handbücher anderer Marken

Pentair Pool Products

Pentair Pool Products Compool Bedienungsanleitung

ComfortNET

ComfortNET CTK04 Bedienungsanleitung

Fireye

Fireye InSight II 95DSS3 Bedienungsanleitung

CAME

CAME G3000 Bedienungsanleitung

Idemia

Idemia MorphoAccess VP MD Bedienungsanleitung

Axis

Axis P1445-LE-3 Bedienungsanleitung

HEIDENHAIN

HEIDENHAIN TNC 150 B Bedienungsanleitung

CNC-Step

CNC-Step High-Z T-Series Bedienungsanleitung

Doosan

Doosan DVF Series Bedienungsanleitung

Honeywell

Honeywell KAP 140 Bedienungsanleitung

Honeywell

Honeywell vk41 series Bedienungsanleitung

AirBench

AirBench FPW Installationsanleitung

Cypress

Cypress HHR-3160 Bedienungsanleitung

CAME

CAME GLT40AOS Bedienungsanleitung

Zonex

Zonex GEN II -VVT Benutzerhandbuch

Altronics

Altronics K 9650 Bedienungsanleitung

micro-trak

micro-trak RoadMaster Bedienungsanleitung

micro-trak

micro-trak Calc-An-Acre II Bedienungsanleitung