FujiFilm EF-W1 Bedienungsanleitung

Owner’s Manual

WIRELESS COMMANDER EF-W1

EF-W1

WIRELESS COMMANDER

Thank you for your purchase of this product.

Before using this commander unit, please read this

owner’ s manual and refer to the owner’ s manual of

your camera carefully to get a better understanding

of the proper operation to enjoy flash photography.

Contents

Name of the Components and Accessories

Power Saving Mode

Before using

Inserting batteries

Paring setting

Basic Operation

Mounting on the camera/Removing from the camera

Turn on the power

Group Setting and Operation

Group setting of flash

Commander group setting and operation method

Open Mode

Mode Setting

TTL Mode

Manual Mode

Control Wheel and Buttons

Channel setting

Setting the coverage (zoom)

Beep sound on/off

Panel lock/unlock button

Other Function Buttons

Modeling light

Other Functions

FP (High speed sync.)

Reset

About Firmware Update

Specifications

7~8

11~12

14~15

16~17

18~19

Name of the Components and Accessories

Accessory

* Special case, cable for remote shutter

Group selection button

Group on/off button

Modeling light button

Shutter cable socket (2.5mm)

M/TTL Mode button

LCD Panel

Control Wheel and buttons

Channel Button

HSS Button

M. Zoom button

Buzzer button

Panel Lock/Unlock button

Pilot button (Test flash button)

Power On/Off button

Strap hole

Unlock button

Micro SD card slot

Battery compartment door

Mounting foot

Hotshoe contacts

* By using a flash compatible with wireless remote shutter such as Nissin

Digital MG10 / MG8, you can use the shutter button on the flash to

release the camera shutter. For details, see the flash instruction manual.

(Nissin Digital: https://www.nissindigital.com)

Power Saving Mode

The EF-W1 has a power saving mode to prevent battery drain.

After 30 seconds from idle, the LCD will go dark and it will turn

off in sync with the camera power. In the power saving mode,

the pilot lamp blinks every 2 seconds. Press any button to exit

power saving mode and the LCD will re-illuminate. If you do not

operate the unit for 60 minutes, the power turns off.

Before Using

Inserting batteries

Use only new batteries of the same brand and type. It is

recommended that you replace them at the same time. For

rechargeable batteries, use batteries that are all charged at the

same time.

Caution

Batteries that can be used: Ni-MH batteries, alkaline batteries

Opens the battery compartment

door and insert 2 x size AAA

batteries as shown in the right

figure.

Make sure the + and - battery

contacts are correctly inserted in

the battery compartment.

Close the battery compartment

door and slide it back in place.

Before using

Paring Setting

Before performing wireless shooting, follow the procedure

below to set up EF-W1 and flash for pairing.

…

Turn off the commander and flash power.

… Follow the procedure below to make

pairing settings.

Be sure to set the pairing when using for the first time.

Flash

EF-60 Setting

Press and hold " ( ) button

of the Control Wheel and

buttons" and Power On / Off

Button ( ) at the same time

for 3 seconds.

Since the beep sound will be heard,

do the setting of " Commander

EF-W1 Setting" as it is.

Press and hold

for 3 seconds.

Beep sound

(with built-in NAS reception function) settings

Step 1

Step 2

Caution

Before using

Press and hold

for 3 seconds.

1. Press and hold the ( ) button of the

Control Wheel and buttons and

power on / off button ( )

simultaneously for 3 seconds.

2. After the pilot button flashes

for 5 seconds, the flash beeping

stops.

3. Pairing is now complete.

• Do not operate the flash until the

pairing process is completed.

• If you have multiple flashes,

you can press and hold some

flashes first to make a beep sound,

and then press and hold this unit

once at the end to pair them at once.

Commander EF-W1

Setting

Pairing is complete

when the flash beep

stops.

Pilot button blinks

for 5 seconds

* Press the Pilot button of the Commander EF-W1 for test flash.

WIRELESS COMMANDER EF-W1

The pairing settings will remain stored even if the power is turned off.

Caution

Basic Operation

Mounting EF-W1 on the camera

Removing EF-W1 from the camera

Insert the mounting foot of EF-W1

into the hot shoe of the camera.

Make sure that the mounting foot

will lock (with a “click”) when it has

been inserted completely.

Caution

Hold the unlock button and

slide the mounting foot of EF-W1

off the hot shoe of camera

When attaching EF-W1 to a camera, do not grab or lift EF-W1. The

mounting foot of EF-W1 or the hot shoe of the camera may be damaged.

Turn on the power

WIRELESS COMMANDER EF-W1

• When you press the Power button and

the Pilot button changes from red to

green, the power is turned on. This unit

can be used.

• For a test flash, press the Pilot button.

• To turn off the flash unit manually,

press the Power button once. Power button

Group Settings and Operations

Group setting of flash

EF-W1 has 8 groups of A, B, C, D, A, B, C, D, and you can

control each group or multiple groups simultaneously.

However, note that the groups that can be used are

limited depending on the flash used.

You can also connect multiple flashes to one group. First,

set the flash group.

Turn the mode dial to select

A, B, or Cgroup

of "Wireless mark".

(available groups: A, B, C)

EF-60 Setting

Mode Dial

Inhaltsverzeichnis

Andere FujiFilm Kamerazubehör Handbücher

FujiFilm

FujiFilm CP-FXA 10 Bedienungsanleitung

FujiFilm

FujiFilm FinePix Z10fd Handbuch

FujiFilm

FujiFilm FJ-500 Bedienungsanleitung

FujiFilm

FujiFilm WP-FZX100 Bedienungsanleitung

FujiFilm

FujiFilm ZK Cabrio Series Bedienungsanleitung

FujiFilm

FujiFilm EF-60 Bedienungsanleitung

FujiFilm

FujiFilm Mount Adapter Betriebsanleitung

FujiFilm

FujiFilm Sonosite PX System Bedienungsanleitung

FujiFilm

FujiFilm WP-FXA500 Bedienungsanleitung

FujiFilm

FujiFilm ZA17x7.6BE RM Bedienungsanleitung

FujiFilm

FujiFilm VG-GFX1 Bedienungsanleitung

FujiFilm

FujiFilm VG-XT4 Bedienungsanleitung

FujiFilm

FujiFilm 18650 Bedienungsanleitung

FujiFilm

FujiFilm TG-BT1 Bedienungsanleitung

FujiFilm

FujiFilm FinePix Z100fd Betriebsanleitung

FujiFilm

FujiFilm PictureCradle CP-FXA10 Bedienungsanleitung

FujiFilm

FujiFilm WP-XQ1 Betriebsanleitung

FujiFilm

FujiFilm FujiColor Superia 100 Bedienungsanleitung

FujiFilm

FujiFilm WP-FXF500 Bedienungsanleitung

FujiFilm

FujiFilm WP-FXF50 Bedienungsanleitung

FujiFilm

FujiFilm FUJICHROME 64T TYPE II Professional Bedienungsanleitung

FujiFilm

FujiFilm FJ-5120LV Bedienungsanleitung

FujiFilm

FujiFilm WP-XQ1 Bedienungsanleitung

FujiFilm

FujiFilm FUJICHROME VELVIA RVP100 Handbuch

Beliebte Kamerazubehör Handbücher anderer Marken

Viltrox

Viltrox EF-NEX Montageanleitung

Calumet

Calumet 7100 Series CK7114 Bedienungsanleitung

Ropox

Ropox 4Single Series Bedienungsanleitung

Cambo

Cambo Wide DS Digital Series Betriebsanleitung

Samsung

Samsung SHG-120 Bedienungsanleitung

Ryobi

Ryobi BPL-1820 Bedienungsanleitung

Aegis

Aegis ABL-36020P Bedienungsanleitung

Fantasea

Fantasea EyeGrabber F Series Bedienungsanleitung

Honeywell

Honeywell HDZ20HD Bedienungsanleitung

EGO

EGO BA1400T Bedienungsanleitung

Sima

Sima SRW-62 Bedienungsanleitung

Shape

Shape A7SSMKIT Bedienungsanleitung

Slide Kamera

Slide Kamera HST-2 Bedienungsanleitung

Power works

Power works 2902613 Bedienungsanleitung

SES

SES SE-2047-2 Bedienungsanleitung

Starlite

Starlite OctoDome nxt Bedienungsanleitung

Custom Brackets

Custom Brackets Digital PRO-M Bedienungsanleitung

Vivo

Vivo MOUNT-LT01C Bedienungsanleitung