FujiFilm instax mini Link Bedienungsanleitung
User's Guide (Full version)
instax mini Link1
WW_EN
2
Table of Contents
Before Use�����������������������������������������������������������������������������������3
Notes on Disposing of the Printer������������������������������������������ 3
Part Names����������������������������������������������������������������������������������3
Installing the App����������������������������������������������������������������������4
Charging the Battery ����������������������������������������������������������������4
Battery Status Indication with the LED�����������������������������������������4
Charging Status Indication with the LED �������������������������������������4
Loading/Unloading the instax mini Film Pack��������������������� 5
Loading the Film Pack����������������������������������������������������������������������5
Unloading a Used Film Pack �����������������������������������������������������������5
Turning on/off the Printer��������������������������������������������������������6
Checking the Printer Status with the LED�����������������������������6
Connecting and Printing����������������������������������������������������������6
When Connecting to the Printer for the First Time ��������������������6
When the Printer and Smartphone Are Already Connected����8
Reprinting an Image �����������������������������������������������������������������9
Controlling the App with the Orientation of the Printer
and the Power Button�������������������������������������������������������������10
Changing the App Mode When the Home Screen Is
Selected on the App���������������������������������������������������������������������� 10
Controlling Zoom and Shutter When Using the instax
Camera on the App������������������������������������������������������������������������ 10
Specifications ���������������������������������������������������������������������������11
Troubleshooting ����������������������������������������������������������������������11
IMPORTANT SAFETY NOTICE�������������������������������������������������12
Simple Printer Care������������������������������������������������������������������������ 13
Bluetooth® Devices: Cautions������������������������������������������������������ 13
Independent JPEG Group (IJG) Licenses
This software is based in part on the work of the Independent
JPEG Group.
© 2019 FUJIFILM Corporation. All rights reserved.
3
WW_EN
Before Use
Before using the printer, check the following has been included.
Supplied Accessories
• USB cable for charging (1)
(BOD700)
• User's Guide (1)
Notes on Disposing of the Printer
A built-in lithium ion battery is used for this printer.
When you dispose of the printer, follow your local regulations.
Please refer to the supplied CONTACT INFORMATION sheet for
queries.
If your country or region is not included in the sheet, please
contact your local distributor.
CAUTION
Do not attempt to remove the built-in battery, this may cause
injury.
Disposal of Electric and Electronic Equipment in
Private Households
Disposal of used Electrical & Electronic Equipment
(Applicable in the European Union and other
European countries with separate collection
systems)
This symbol on the product, or in the manual and in the warranty,
and/or on its packaging indicates that this product shall not be
treated as household waste. Instead it should be taken to an
applicable collection point for the recycling of electrical and
electronic equipment.
By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences to the environment and
human health, which could otherwise be caused by inappropriate
waste handling of this product.
The recycling of materials will help to conserve natural resources.
For more detailed information about recycling of this product,
please contact your local city office, your household waste
disposal service or the shop where you have purchased the
product.
In Countries outside of EU: If you wish to discard this product,
please contact your local authorities and ask for the correct way of
disposal.
This Symbol on the batteries or accumulators
indicates that those batteries shall not be treated as
Household waste.
For customers in Turkey:
EEE Complies with Directive�
Read “IMPORTANT SAFETY NOTICE” (p. 12) for safety use.
Part Names
When using the printer for the first time, ensure that the battery
is fully charged.
Front
1
2
3
4
5
Rear
7
6
1 Film ejection slot
2 Power button/LED*1
3 USB port cover
4 USB port
5 Reset button*2
6 Film door lock
7 Film door
*1 For details on the LED indication, see pages 4 and 6.
*2 If the printer does not work properly, press the reset button to
reset the printer.
4
Installing the App
Please install the mini Link Smartphone App before using the
printer.
• If you are using an Android OS smartphone, please search for
the mini Link Smartphone App in Google Play Store and install
it.
*Requirements for Android OS smartphones: Android Ver. 5.0
or higher with Google Play Store installed
• If you are using an iOS smartphone, please search for the
mini Link Smartphone App in the App Store and install it.
*Requirements for iOS smartphones: iOS Ver. 10.0 or higher
• Even if you have downloaded the app and your smartphone
meets the above requirements, you may not be able to use the
mini Link Smartphone App. This is dependent upon your
smartphone model.
Access instax mini Link app download site for the latest
information on system requirements�
Charging the Battery
Ensure USB is correctly attached as indicated.
To an indoor power
outlet
Connect the printer using the supplied USB cable to a USB AC
adapter then connect the USB AC adapter to an indoor power
outlet.
• You can print an image while charging is in progress.
• Charging time is approximately 80 to 120 minutes.
Battery Status Indication with the LED
Battery status can be determined whilst the printer is not
connected to the app. Battery status can also be checked whilst
the printer is connected to your smartphone via the app.
Indication Battery status
LED lights up in red Low battery remaining
LED lights up in green Battery is over halfway charged
Charging Status Indication with the LED
Battery status can be checked with the LED.
Indication Charging status
LED flashes in red Charging
LED flashes in green Charging almost complete
LED lights up in green
(When the printer is turned
on and not connected to
the app)
Charged
LED goes off (When the
printer is turned off) Charged
Charging from a PC:
• Connect the printer and PC directly. Do not connect via a USB
hub or keyboard.
• If the PC goes into sleep mode while charging, charging is
discontinued. To continue charging, exit sleep mode and then
reconnect the USB cable.
• The battery may not be able to charge depending on the
specifications, settings or conditions of the PC .
Notes
• The battery cannot be removed.
• The battery is not fully charged when shipped. Be sure to
charge the battery before use.
• For notes about the battery, see“Common Sense Printer Care”.
(p.12)
5
WW_EN
Loading/Unloading the instax mini Film Pack
Caution
Do not open the film door until you have used up the film;
otherwise, the rest of the film will become exposed and turn
white� The film can no longer be used�
• When you load the film pack, never press the two rectangular
holes on the back of the film pack.
• Never use a film pack beyond its shelf life; otherwise, it may
damage the printer.
Use FUJIFILM instax mini Instant Film only. The instax SQUARE
film or instax WIDE film cannot be used.
Notes on the film pack
• Each FUJIFILM instax mini film pack contains one black film
protective cover and 10 film sheets.
• Do not remove the film pack from its inner foil packaging
until you are ready to load the film into the printer.
• The film cover is ejected automatically when the film door is
closed.
For details, refer to the instructions and warnings on FUJIFILM
instax mini Instant Film.
Loading the Film Pack
1 Slide and hold the film door lock, then open the film
door.
2
1
2 Insert film pack by aligning the yellow marks on the
film pack and body of the printer�
2
1
Note
Be sure to align the yellow marks on the printer and on the
film pack.
3 Close the film door�
4 The black film protective cover will automatically be
ejected� This can be removed and disposed of�
.
Unloading a Used Film Pack
1 Slide and hold the film door lock, then open the film
door�
12
2 Grasp the rectangular holes on the film pack and
remove the empty film cartridge�
2
1
6
Turning on/off the Printer
Press and hold the Power button for approximately 1 second to
turn the printer on or off.
Turning the printer on lights up the LED.
If no operation occurs for roughly 10 minutes, the printer turns off
automatically.
Checking the Printer Status with the LED
The following LED activity will indicate the following printer status.
Color LED status Status
Blue Lit-solid Connecting with the app/
Print mode
Orange Lit-solid Connecting with the app/
Fun mode
Pink Lit-solid Connecting with the
app/instax Camera mode
White Flashing wave-
like form
Connecting with the app/
Operation screen
White Flashing Firmware is being updated
Purple Lit-solid Reprinting
Rainbow color Flashing Transferring an image
–* Flashing* Printing
Yellow Lit-solid Critical error occurred
Yellow Flashing quickly Non-critical error occurred
Yellow Flashing slowly Minor error occurred
Red Flashing Charging
Green Flashing Charging almost complete
Green Lit-solid Charged (When the printer
is turned on and not
connected with the app)
*During printing, the color of the flashing LED changes depending
on the main colors of the image being transferred.
Connecting and Printing
When Connecting to the Printer for the First Time
1 Press and hold the Power button for approximately
1 second to turn the printer on�
The LED lights up.
2 Open the “mini Link” app�
3 Read the terms of use, then put a checkmark in the
[Agree to this content] box, and tap [Agree to this
content →]�
7
WW_EN
4 Quick instructions are displayed� Read the
instructions and tap [I Understood →]�
Set the [Bluetooth Connection] to [Later].
[Bluetooth Connection] can also be set in the process of
printing.
5 Select an image that you wish to print�
6 Tap or swipe up on the screen�
Before tapping , tapping on the lower right adjusts
the image and tapping on the lower left filters the
image.
Note
If your Bluetooth settings are switched off, the following
screen appears.
Tapping [Please turn on Bluetooth] opens the Bluetooth
settings screen. Set the Bluetooth settings on.
7 When a printer is detected, tap [Connect]�
If multiple printers are detected, select the printer to
connect from the list.
The printers identifier (device name) is located on the
bottom of the printer.
8
When the Printer and Smartphone Are Already
Connected
1 Press and hold the Power button for approximately
1 second to turn the printer on�
The LED lights up.
2 Open the “mini Link” app�
3 Select an image that you wish to print�
8 When a printer is connected, tap [Close]�
9 Tap again�
The printer starts printing.
10 When the film has been ejected (the printer stops
making a sound), hold the edge of the film and
remove from the printer�
You can view the number of films remaining on the app.
9
WW_EN
4 Tap or swipe up on the screen�
The printer starts printing.
Before tapping , tapping on the lower right adjusts
the image and tapping on the lower left filters the
image.
5 When the film has been ejected (the printer stops
making a sound), hold the edge of the film and
remove from the printer�
You can view the number of films remaining on the app.
Reprinting an Image
The last image printed can be reprinted by turning the printer over
with the film ejection slot facing downwards and pressing the
power button.
Notes
• When the printer is connected with the app and the app is in
instax Camera mode, you cannot use the reprint function.
• The last stored image that has been printed is deleted when the
printer is turned off. In this case, you are able to print the image
from the app.
• When reprinting with the film ejection slot facing downwards,
keep at least 10 cm distance between the printer and other
objects.
10
Controlling Zoom and Shutter When Using the
instax Camera on the App
Tilt the printer forward to zoom in.
Tilt the printer backward to zoom out.
Press the Power button to release the shutter.
Controlling the App with the Orientation of
the Printer and the Power Button
When this printer is linked to the app on your smartphone or
tablet, you can control the app by tilting the printer. (Smartphone
app linked function)
For details, refer to the FAQ of the mini Link app.
Note
Make sure that [Camera operation settings] is set to [ON] on the
mini Link app. When it is set to [OFF], this function is unavailable.
Changing the App Mode When the Home Screen Is
Selected on the App
Stand the printer up to switch to Print mode.
Lay the printer down with the Power button facing upwards to
switch to Fun mode.
Notes
• You can change the app mode using the printer only when the
home screen is selected.
• The Fun mode and Print mode buttons can be used regardless
of the selected mode.
Andere Handbücher für instax mini Link
2
Inhaltsverzeichnis
Andere FujiFilm Drucker Handbücher
FujiFilm
FujiFilm iGen 150 Installationsanleitung
FujiFilm
FujiFilm ASK-500 Handbuch
FujiFilm
FujiFilm instax mini Link Bedienungsanleitung
FujiFilm
FujiFilm instax mini Link Bedienungsanleitung
FujiFilm
FujiFilm PICTROGRAPHY 4500N Bedienungsanleitung
FujiFilm
FujiFilm instax SHARE SP-3 Bedienungsanleitung
FujiFilm
FujiFilm Pictrography series Bedienungsanleitung
FujiFilm
FujiFilm FinePix Printer NX-500 Bedienungsanleitung
FujiFilm
FujiFilm Apeos 2560 Bedienungsanleitung
FujiFilm
FujiFilm ApeosPort-VII C4421 Bedienungsanleitung
FujiFilm
FujiFilm ApeosPro C810 Bedienungsanleitung
FujiFilm
FujiFilm ApeosPro C810 Bedienungsanleitung
FujiFilm
FujiFilm Frontier DL600 Bedienungsanleitung
FujiFilm
FujiFilm instax square Link Bedienungsanleitung
FujiFilm
FujiFilm Apeos C7070 Gebrauchsanweisung
FujiFilm
FujiFilm instax SHARE SP-2 Bedienungsanleitung
FujiFilm
FujiFilm Frontier-S DX100 Bedienungsanleitung
FujiFilm
FujiFilm Revoria Press EC1100 Bedienungsanleitung
FujiFilm
FujiFilm Printpix NC-400D Bedienungsanleitung
FujiFilm
FujiFilm Apeos C8180 Bedienungsanleitung
