Fujitsu fi-5120C Konfigurationshandbuch
fi-5120C / fi-5220C Cleaning and Maintenance
TROUBLE SHOOTING
CONTENTS MAP
©
fi5120C / fi5220C Cleaning and Maintenance
fi-5120C / fi-5220C Image Scanner Operator Guide
TROUBLE SHOOTING
CONTENTS MAP
TOP
This chapter describes how to clean the scanner.
WARNING
When operating the scanner, the ADF's glass becomes very hot.
Before you clean inside the scanner, turn off its power and unplug the AC adapter from the
outlet. Wait for at least 15 minutes.
Do not turn off the scanner when you clean the Feed rollers
©
fi-5120C / fi-5220C Image Scanner Operator Guide
TROUBLE SHOOTING
CONTENTS MAP
TOP
Cleaning Materials
The table below shows the cleaning materials that are used on this scanner.
Cleaning Materials Part No. Remarks
Cleaner F1
(or isopropyl alcohol)
CA99501-0013
1 bottle (100 ml)
Moisten cloth with this fluid and wipe the scanner
clean.
Soft, dry cloth Commercially available. Any lint-free cloth can be used.
For details on Cleaner F1, consult the agent where you bought your scanne or an authorized FUJITSU service providerr.
Locations and Cycle for Cleaning
Location Standard Cleaning Cycle
Pad ASSY
Clean every 1,000 scanned sheets.
Pick roller
Feed roller
Plastic roller
Glass
Document holding pad
Document bed
ATTENTION
The scanner must be cleaned more frequently when the following documents are used:
●Documents of coated paper
●Documents with printed text or graphics almost covering the entire surface
●Chemically treated documents such as carbonless paper
●Documents containing a large amount of calcium carbonate
●Documents written by pencil
●Documents on which the toner is not fused sufficiently
©
fi-5120C / fi-5220C Image Scanner Operator Guide
TROUBLE SHOOTING
CONTENTS MAP
TOP
12
ATTENTION
Detergent for cleaning windows or glass cleaner can be used instead of cleaner F1. However, do not use
paint thinner or other organic solvents.
Cleaning the Flatbed
The following parts needs to be cleaned in the Flatbed area:
:Document holding pad
:Document bed
12
©
fi-5120C / fi-5220C Image Scanner Operator Guide
TROUBLE SHOOTING
CONTENTS MAP
TOP
12
1. Open the document cover.
2. Clean the following locations using a soft cloth moistened with cleaner F1.
: Document holding pad.
: Document bed.
ATTENTION
Do not allow moisture to get inside the device during cleaning.
3. Wait for cleaned parts to dry.
4. Gently close the document cover.
12
©
fi-5120C / fi-5220C Image Scanner Operator Guide
TROUBLE SHOOTING
CONTENTS MAP
TOP
12 3 4
As a Guideline, clean the ADF every 1,000 scanned sheets. Note that this guideline varies according to the type of
documents you scan. For example, it may be necessary to clean the ADF more frequently if documents are scanned
when the toner is not sufficiently fixed on the printout.
CAUTION
The glass surface of the ADF becomes hot during the operation of the scanner.
Before you start to clean the inner parts of the scanner, disconnect the AC adapter from the power
outlet, and wait at least 15 minutes to let the glass cool down.
Cleaning the ADF
1. Open the ADF by pushing on the ADF button and turning the ADF cover to the front.
ADF button
CAUTION
Be careful, the ADF cover may close and pinch your finger.
12 3 4
©
fi-5120C / fi-5220C Image Scanner Operator Guide
TROUBLE SHOOTING
CONTENTS MAP
TOP
123 4
2. Clean the following locations with a soft, dry cloth moistened with Cleaner F1.
No. Item
1Pad ASSY (x 1)
2Feed rollers (x4)
3Pick roller (x1)
4Plastic rollers (x 4)
5Glass (x 2)
6Ultrasonic sensors (x 2)
ATTENTION
To avoid damaging the document sensors, take care that the cloth does not get hooked into them
when cleaning the inside of the ADF.
123 4
©
fi-5120C / fi-5220C Image Scanner Operator Guide
TROUBLE SHOOTING
CONTENTS MAP
TOP
1 2 34
Pad ASSY
Clean the Pad ASSY (rubber surface) downwards (direction of arrow). Take care not to catch the pick springs to avoid
bending.
Pick spring
The portion to clean
Pick roller
Lightly clean the Pick roller taking care not to scratch the roller surface and the Mylar sheet. Take particular care in
cleaning this roller as black debris on it adversely affects the pickup performance.
Mylar sheet
Plastic roller
Clean lightly taking care not to damage the surface of these rollers. Take particular care when cleaning these rollers as
black debris matter on it affects document pick performance. Be careful no to damage the sponges beside the rollers.
Glass
Clean lightly.
HINT
If the glass is dirty, vertical black streaks may apper in the scanned images.
Ultra sonic sensor
Clean lightly with a dry cloth.
With the movie below, review the procedure to clean the Pad ASSY, Pick roller, ADF glass surfaces and the Plastic rollers:
1 2 34
©
Andere Handbücher für fi-5120C
2
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Fujitsu Barcode-Lesegerät Handbücher
Beliebte Barcode-Lesegerät Handbücher anderer Marken
POSMicro
POSMicro Datalogic PowerScan D7100 Bedienungsanleitung
Marson
Marson MT780 Kurzanleitung zur Einrichtung
NCR
NCR RealPOS Bedienungsanleitung
Motorola
Motorola SE3300 Kurzanleitung zur Einrichtung
Element
Element P130BT Bedienungsanleitung
Motorola
Motorola Symbol LS3008 Installations- und Betriebshandbuch
