Fujitsu FTP-624DSL113 Bedienungsanleitung
FTP-624MCL303/304/FTP-624DSL113
■OVERVIEW
FTP-624MCL303/304 is a high speed, battery driven thermal
printer with a miniature cutter, printing on 2-inch wide paper
(58mm/60mm). A newly developed, long life, compact, light
weight cutter has been partnered with a FTP-624MCL
mechanism to produce this new product.
The design allows easy maintenance, head cleaning, head
replacement, and cutter replacement.
This printer is suitable for a variety of applications, such as
hand held POS terminals, measurement and medical
instruments.
A dedicated LSI (microcontroller) for driving the printer or an
interface board mounting this LSI is also available.
■HIGHLIGHTS
• Long life
Due to our proprietary cutter driving mechanism, the life of
the cutter is 300,000 cuts.
• High speed printing
It can print at 60 mm/s (480 dotlines) maximum by using
Fujitsu's unique head drive control.
• Paper auto loading function
Thermal paper can be loaded without head-up lever
operation.
• Two types of cut functions
Full and partial cut are possible.
• UL Recognized
File No. E171434
BATTERY DRIVE, MICRO LINE THERMAL PRINTER
2” TYPE MECHANISM AND INTERFACE BOARD
WITH MINIATURE CUTTER
FTP-624MCL303/304
FTP-624DSL113
FTP-624CU
1
2
FTP-624MCL303/304/FTP-624DSL113
■DESIGNATION
*1: 303 is for front paper insertion (curl path) and 304 is for rear paper insertion (straight path).
*2: Includes ANK+Kanji and Flash Memory.
Printer mechanism FTP-624MCL303/304*1
Interface board (Centronics /RS-232C) FTP624DSL113*2
LSI Micro Controller Unit FTP-624CU112
Thermal head cable FTP-624Y001
Parallel interface cable FTP-441Y201
Cables Serial interface cable FTP-624Y301
Power cables FTP-621Y401
FTP-621Y601
Part numberItem
Part number FTP-624MCL303/304
Printing method Thermal-sensitive line dot method
Dot structure 384 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 48 mm
Paper width (MCL303) 58 mm
Paper width (MCL304) 60 mm
Paper thickness 60 to 100 µm
Number of columns 32 columns/line (24 ×12 dot font)
480 dotlines/s (60 mm/s)
Conditions: 1 ply, printing on high sensitive thermal paper,
8 columns of “H” /line, double density 16 ×8 dot font,
room temperature, 8.5 VDC drive
JIS ANK : 128 International : 195
Character types ASCII : 31
JIS KANJI : approximately 6800
24 ×12 dots, (3.0 ×1.5 mm), 32 columns
16 ×8 dots, (2.0 ×1.0 mm), 48 columns
16 ×16 dots, (2.0 ×2.0 mm), 24 columns
24 ×24 dots, (3.0 ×3.0 mm), 16 columns
Interface Centronics / RS-232C (selectable by dip swtich)
■GENERAL SPECIFICATIONS
SpecificationsItem
Maximum printing speed
Character, dimensions (H×W), number of
characters
(Continued)
3
FTP-624MCL303/304/FTP-624DSL113
For head Voltage: 4.2-8.5 VDC
Peak current: approx. 2.6 A (conditions: room temp., 7.2 VDC, 64 dots on)
For motor Voltage: 4.2-8.5 VDC
Peak current: approx. 0.8 A (conditions: room temperature, 7.2 VDC)
For logic Voltage: 5.0 VDC ±5%
Current: 0.2 A maximum
For cutter Voltage: 5.0 VDC ±5%
Current: Approximately 5.0A (in-rush)
Approximately 1.0A (average)
Mechanism 97 (W) ×57 (D) ×38 (H) mm
Dimensions Interface board 131 (W) ×89 (D) ×24 (H) mm
Weight (Mechanism) Approximately 280 g
Mechanism Pulse durability: 1 ×108pulse/dot (using Fujitsu Takamisawa's standard
driving method)
Expected life Wear resistance: 50 km (at 25% print ratio)
Cutter 300,000 cuts minimum
Operating temperature 0 to +50°C*1
Operating humidity 20 to 85% RH (no condensation)
Storage temperature –20 to +60°C (excluding paper)
Storage humidity 5 to 95% RH (no condensation)
Head temperature By thermistor (applied energy control, abnormal temperature detection)
Detection Paper out/Mark detect By photointerrupter
Head-up By microswitch
For front insertion use (58 mm width) : FTP-020PU001, FTP-020P0104/
P0701
For rear insertion use (60 mm width) : FTP-020P0020, FTP-020P0105/
P0702
Recommended thermal sensitive paper In Europe (58 mm width) : FTP-021P0060-45
· Oji Paper : PD150R, PD160R-N, PD170R
· NIPPON Paper : TF50KS-E4,TF60KS-E,TF50KS-E
· MITSUBISHI Paper Mills : P220VBB-1, AFP-235
SpecificationsItem
(Continued)
Power
supply
Environmental
conditions
*1: Guarantee +5°C to +40°C.
4
FTP-624MCL303/304/FTP-624DSL113
■DIMENSIONS
Printer mechanism
Unit: mm
(Motor)
(Sensor)
5
FTP-624MCL303/304/FTP-624DSL113
Interface board
Unit: mm
17.0
1.6
5.0 23.6
120.7
105.4
86.4
69.9
56.7
15.233.0 71.1
105.4
120.7
130.8
5.1
5.1 5.1
5.1
CN3
CN9 CN10 CN6 CN5
CN11 CN1 CN2 CN4
5.1
CN8
39.4
39.4
78.7
88.9
5.1
5.1
5.1
Mounting height
Mounting height
4-ø3.6
6
FTP-624MCL303/304/FTP-624DSL113
■CONNECTOR PIN ASSIGNMENT FOR PRINTER MECHANISM
1. Thermal Head
Head side : B16B-PH-K-S-2.2 (J.S.T.) or equivalent
Board side : PHR-16 (J.S.T.) or equivalent
2. Motor connectors
Motor side : PHR-4 (J.S.T.) or equivalent
Board side : B4B-PH-K-S (J.S.T.) or equivalent
*1: Symbol: " " means a negative logic signal
1, 2, 3, ......................................15, 16
Motor Thermal head heat sink Head up level
Connector Pin No.
3. Sensor connectors
Sensor : PHR-5 (J.S.T.) or equivalent
Board side : B5B-PH-K-S (J.S.T.) or equivalent
7
FTP-624MCL303/304/FTP-624DSL113
■FUNCTION
metImetI
.1noitcnuftnirptseT.8noitcetedytilamronbarettuC
.2noitcetedtuorepaP.9noitcnufgnivasrewoprotoM
.3noitceteddneraenrepaP.01noitcnufnoitcetedkraM
.4noitcetedpudaeH.11noitcetedytilamronbanoitarepoUCM
.5 ytilamronbaerutarepmetdaehlamrehT
noitceted .21noitcetorpecneuqesFFO/NOrewoP
.6noitcetedesuftuo-wolB.31noitcetorptnerruc-revorotoM
.7noitcetedytilamronbaegatlovdaeH.41remiterawdraH
3. Cutter
Mech side : EHR-4 (J.S.T.) or equivalent
Board side : B4B-EH (J.S.T.) or equivalent
© 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 06/2002
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: www.fcai.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: www.fceu.fujitsu.com
Asia Pacific
Fujitsu ComponentsAsia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
www.fcal.fujitsu.com
Fujitsu Components
International
Headquarter
Offices
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Fujitsu Drucker Handbücher
Fujitsu
Fujitsu DL5600 Bedienungsanleitung
Fujitsu
Fujitsu FP-1000 Bedienungsanleitung
Fujitsu
Fujitsu fi-760PRB Handbuch
Fujitsu
Fujitsu FTP-633MCL400 Bedienungsanleitung
Fujitsu
Fujitsu KD96009-0648 Bedienungsanleitung
Fujitsu
Fujitsu RS-232C Bedienungsanleitung
Fujitsu
Fujitsu FTP-627MCL353 Bedienungsanleitung
Fujitsu
Fujitsu FTP-641MCL301 Bedienungsanleitung
Fujitsu
Fujitsu PrintPartner 8000 Bedienungsanleitung
Fujitsu
Fujitsu Printer Bedienungsanleitung
Fujitsu
Fujitsu FP-1100 Bedienungsanleitung
Fujitsu
Fujitsu FTP-641MCL351 Bedienungsanleitung
Fujitsu
Fujitsu JOYRITER Bedienungsanleitung
Fujitsu
Fujitsu RX7300E Bedienungsanleitung
Fujitsu
Fujitsu DX2100 Bedienungsanleitung
Fujitsu
Fujitsu ApeosPrint C4030 Bedienungsanleitung
Fujitsu
Fujitsu ULTIMA90 Bedienungsanleitung
Fujitsu
Fujitsu 10 ppm Bedienungsanleitung
Fujitsu
Fujitsu DL7400 Bedienungsanleitung
Fujitsu
Fujitsu FTP-622MCL301 Bedienungsanleitung
