Fujitsu FTP-627 Series Bedienungsanleitung

NOT FOR NEW

DESIGN

FTP-627 Series

■OVERVIEW

The FTP-627 MCL Series consists of 24V drive ultra compact

printers with 2 inch paper widths (58mm), which can print at

high speed. Paper can be easily set by an unique platen

release mechanism.

The FTP-627 MCL series can be used for a variety of

applications, such as portable terminals, POS, ticket issuing

terminals, label printers, and measurement and medical

equipment.

■HIGHLIGHTS

• Ultra compact

Height 15.5 mm, width 69.6 mm, depth 34.3 mm (MCL002)

• High speed printing

It can print at 60 mm/s (480 dotlines/s) maximum by using

Fujitsu's unique head drive control.

• With Auto Cutter

Two types of compact cutters, a full cut and a partial cut, are

in series.

• High resolution printing / Kanji supported

8 dots/mm of resolution printing is possible.

• Easy paper setting

Our unique platen release mechanism allows a

wide paper route even if the printer is ultra-compact, so

paper can be easily inserted. Auto loading is also available

on MCL001, MCL003 and MCL303 models.

• Two types of paper routes

Front and bottom paper feed.

• Easy mounting

Head,motor,sensorandothercomponentwiringareunified

to one flexible cable, and the mechanism can be secured by

one hook and two screws at two locations, making mounting

easy.

24V, 2" HIGH SPEED THERMAL PRINTER

FTP-627MCL Series

NOT FOR NEW

DESIGN

■PART NUMBERS

■SPECIFICATIONS

Part number FTP-627MCL001/002/003/004/303#01/303#02

Printing method Thermal-line dot method

Dot structure 384 dots/line

Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density

Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch

Effective printing area 48 mm

Number of columns ANK 32 columns/line (maximum 12x 24 dot font)

Paper width 58 mm +0

Paper thickness 60 to 80 µm (some paper in this range may not be used because of

paper characteristics)

Printing Speed Maximum 60mm/sec. (480 dot line/sec.)

Alphanumeric, katakana: 159 types

International and special characters: 195 types

JIS Kanji level 1, level 2, non-Kanji

(supported only by FTP-627DSL112, DCL111): about 6800 types

12 ×24 dots, (1.5 ×3.0 mm), 32 columns: alphanumeric, katakana

24 ×24 dots, (3.0 ×3.0 mm), 16 columns: alphanumeric, katakana, Kanji

8 ×16 dots, (1.0 ×2.0 mm), 48 columns: alphanumeric, katakana

16 ×16 dots, (2.0 ×2.0 mm), 24 columns: alphanumeric, katakana, Kanji

SpecificationsItem

Character types

Character, dimensions (H×W), number of

columns

metIrebmuNtraP

msinahcemretnirP

hctiwsnoitcetednepodaehtuohtiwnoitresnirepaptnorf(100LCM726-PTF hctiwsnoitcetednepodaehtuohtiwnoitresnirepapmottob(200LCM726-PTF )bonkdnahctiwsnoitcetednepodaehhtiwnoitresnirepaptnorf(300LCM726-PTF )hctiwsnoitcetednepodaehhtiwnoitresnirepapmottob(400LCM726-PTF

rettuchtiwmsinahceM rettuctucllufhtiw300LCM10#303LCM726-PTF

rettuctuclaitraphtiw300LCM20#303LCM726-PTF

gnivirdrofISL101UC726-PTF

ecafretnI

draoB

ylnoKNA )lairesC232SR(110LSD726-PTF

)scinortneC(110LCD726-PTF

ijnaK

detroppus ,)hsalfhtiwlairesC232SR(211LSD726-PTF

)scinortneC(111LCD726-PTF

-1

FTP-627MCL Series

NOT FOR NEW

DESIGN

■SPECIFICATIONS

metInoitacificepS

ecafretnI scinortneC/C232SRotsmrofnoC

rewoP

ylppus

daehtnirproF ,C˚52(A1.1.xorppatnerruc,tnerrucegareva%5±CDV42

)stod46,NOylsuoenatlumis,V42)0051=vaR

retnirpforotomroFmumixamA1,%5±CDV42

rettucforotomroFmumixamA1,%5±CDV42

cigolroFmumixamA2.0,%5±CDV5

snoisnemiD

msinahcemretnirP )dedulcxerevel(300LCM,)HxDxW(mm5.51x7.53x5.38

rettuchtiwmsinahceM )dedulcxeeraselbacdnaswercs(,)HxDxW(mm4.62x0.34x5.38

draobecafretnImm42x98x131

thgieW

tuohtiwmsinahcemretnirP

rettuc g55yletamixorppA

htiwmsinahcemretnirP

rettuc g021yletamixorppA

efiL

daeH dradnatsruorednu(tod/seslupnoillim001:ecnatsiseresluP mk05ecnatsidgnilevartrepap:ecnatsisernoisarbA.)snoitidnoc

)sselro%52:oitartnirp(

rettuCmuminim000,003

gnitarepO

tnemnorivne

erutarepmetgnitarepO sinoitarepo,egnarecnarussaytisnedgnitnirp(C˚04+otC˚5+

)C˚04+otC˚0taelbissop

ytidimuhgnitarepO)noitasnednocon(HR%58ot02

erutarepmetegarotS)dedulcnitonrepap(C˚06+otC˚02-

ytidimuhegarotS)noitasnednocon(HR%59-5

noitceteD

noitcnuf

noitcetederutarepmetdaeHrotsimrehtybdetceteD

noitcetedkram/tuorepaPretpurretni-otohpybdetceteD

noitcetedpudaeH )ylno2#303/1#303/400/300(hctiws-edilsybdetceteD

repapevitisneslamrehtdednemmoceR

:repapevitisneshgiH)repaPnoppiN(4E-SK05FT

:repapdradnatS)repaPnoppiN(E-SK06F

)mm85(4010P020-PTF,100UP020-PTF

)repaPijO(R051DP

)mm85(1070P020-PTF

egarotsefilmuideM

:repap )repaPnoppiN(1F-SK06FT

)mm85(2010P-PTF

)repaPijO(R071DP

)repaPihsibustiM(1-BBV022P

:repapegarotsefilgnoL

)repaPijO(N-R06DP

)repaPihsibustiM(532-PFA

)repaPnoppiN(R-JK05PT

)repaPihsibustiM(AA022AH

FTP-627MCL Series

NOT FOR NEW

DESIGN

■FUNCTION

■DIMENSIONS

1. Printer mechanism

Unit: mm

metImetI

.1noitcnuftnirptseT.8noitcetedytilamronbarettuC

.2noitcetedtuorepaP.9noitcnufgnivasrewoprotoM

.3noitceteddneraenrepaP.01noitcnufnoitcetedkraM

.4noitcetedpudaeH.11noitcetedytilamronbanoitarepoUCM

.5 ytilamronbaerutarepmetdaehlamrehT

noitceted .21noitcetorpecneuqesFFO/NOrewoP

.6noitcetedesuftuo-wolB.31noitcetorptnerruc-revorotoM

.7noitcetedytilamronbaegatlovdaeH.41remiterawdraH

FTP-627MCL Series

NOT FOR NEW

DESIGN

2. Interface board

Unit: mm

130.8

83.8

55.9

6.4

5.1

88.9

78.7

39.4

5.1 30.591.4

120.75.1

39.4

4 - ø 3.6±0.1

CN10

CN11*

CN5**CN2

CN8

CN1

Part mounting side

Part solder side

* CN11 used

** CN5 used for paper near end detection

FTP-627MCL Series

NOT FOR NEW

DESIGN

■PRINTER CONNECTOR (CN8) (FLEXIBLE PT BOARD) PIN ARRAYS

Control circuit side connector: 52030-3010 Molex or equivalent product

No. Signal I/O Contents No. Signal I/O Contents

1 PHK — Photo interrupter (cathode) 2 VSEN I

Power supply for paper sensor

3 PHE O Photo interrupter (emitter) 4VH I

Head driving power supply

5VH I

Head driving power supply

6 GNC —

Ground for head

7 GND —

Ground for head

8 DIN I

Data input

9 LAT I Data latch 10 CLK I

Clock

11 STB6 I Enable 6 12 STB5 I

Enable 5

13 STB4 I Enable 4 14 VDD I

Logic Power supply

15 STB3 I Enable 3 16 STB 2 I

Enable 2

17 STB1 I Enable 1 18 TH O

Thermistor

19 TH O Thermistor 20 GND —

Ground for head

21 GND —

Ground for head

22 VH I

Head driving power supply

23 VH I

Head driving power supply

24 N.C. —

Open terminal

25 SW1 I Head open switch* 26 SW2 O Head open switch*

27 MT/B I Stepping motor coil 28 MT/B I Stepping motor coil

excitation signal B excitation signal B

29 MT/A I Stepping motor coil 30 MT/A I Stepping motor coil

excitation signal A excitation signal A

* on MCL003 / MCL004/ MCL303#01 and MCL303#02 models

FTP-627MCL Series

NOT FOR NEW

DESIGN

No. Signal I/O Contents No. Signal I/O Contents

1 PRSTB I Data strobe 2 PRSTB-RET —

Connected to logic GND

3 PRDT0 I Data 0 4 PRDT0-RET —

Connected to logic GND

5 PRDT1 I Data 1 6 PRDT1-RET —

Connected to logic GND

7 PRDT2 I Data 2 8 PRDT2-RET —

Connected to logic GND

9 PRDT3 I Data 3 10 PRDT3-RET —

Connected to logic GND

11 PRDT4 I Data 4 12 PRDT4-RET —

Connected to logic GND

13 PRDT5 I Data 5 14 PRDT5-RET —

Connected to logic GND

15 PRDT6 I Data 6 16 PRDT6-RET —

Connected to logic GND

17 PRDT7 I Data 7 18 PRDT7-RET —

Connected to logic GND

19 ACKNLG O Data input acknowledge 20 ACKNLG-RET —

Connected to logic GND

21 BUSY O Busy 22 BUSY-RET —

Connected to logic GND

23 RINF2 O Printer status 2 24 INPRM-RET —

Connected to logic GND

25 SLCTIN I Printer select 26 INPRM I Reset

27 RINF1 O Printer status 1 28 RINF3 O Printer status 3

29 ATF I Paper feed request 30 GND — Logic GND

Notes:

• Symbol “——” means a negative logic signal.

• “–RET” signal is a return signal of the twisted pair cable.

• “I” or “O” means a signal direction from the interface board side.

(3) Connector pin number (4) Data input signal timing

FCN-605Q030-G/S(Fujitsu Components)

(2) Connector pin assignment

■INTERFACE

1. Centronics interface

(1) Connector (CN1)

Connector part number : FCN-605Q030-G/S (Fujitsu Components) or equivalent

Mating connector part number : FCN-607B030-G/D (Fujitsu Components) or equivalent

PRDT0~7

PRSTB

BUSY

ACKNLG

t1 t3

Data set time

PRSTB pulse width

Data hold time

PRSTB to BUSY= “H”

ACKNLG pulse time

:t1≥0.5 µsec

:t2≥0.5 µsec

:t3≥0.5 µsec

:t4≤0.5 µsec

:t5≈5.0 µsec

FTP-627MCL Series

NOT FOR NEW

DESIGN

2. RS-232C

(1) Connector (CN2)

Connector part number : B6B-XH-A (J.S.T.) or equivalent

Mating connector part number : XHP-6 (J.S.T.) or equivalent

(2) Connector pin assignment

Notes:

• Symbol “——” means a negative logic signal.

• “I” or “O” means a signal direction from the interface board side.

(5) Printer status signals

sutatsrorrE1FNIR2FNIR3FNIR

.1tuorepaPwoLhgiHwoL

.2dneraenrepaPhgiHhgiHwoL

.3pudaeHhgiHwoLwoL

.4ytilamronbaerutarepmetdaeHhgiHwoLhgiH

.5ytilamronbaegatlovdaeHwoLhgiHhgiH

.6ytilamronbaerawdraHhgiHhgiHhgiH

.7ytilamronbanoitcetedkraMwoLwoLwoL

.8lamroNwoLwoLhgiH

Cutter (CN11)

.oNlangiSO/I.oNstnetnoC.oNlangiSO/I.oNstnetnoC

1GF- dnuorgemarF2DRI atadevieceR

3DTO atadnoissimsnarT4RTDO ydaerlanimretataD

5DNG- dnuorglangiS6RSDI ydaertesataD

7NITCLSI tcelesretnirP8MRPNIIteseR

9FTAI tseuqerdeefrepaP01DWPI noitallecnacnwodrewoP

langis

FTP-627MCL Series

NOT FOR NEW

DESIGN

■CONNECTOR PIN ASSIGNMENT

1. Connector for power supply (CN10)

Part number : B6B-VH White (J.S.T) or equivalent (board side)

Mating connector part number: VHR-6 (J.S.T.) or equivalent

2. Connector for printer mechanism connection (CN8)

Part number : 52030-3010 (made by Molex) or equivalent (board side)

No. Signal I/O Contents No. Signal I/O Contents

1 PHK — Photo interrupter (cathode) 2 VSEN O

Power supply for paper senor

3 PHE I Photo interrupter (emitter) 4VH O

Head driving power supply

5VH O

Head driving power supply

6 GNC —

Ground for head

7 GND —

Ground for head

8 DIN O

Data input

9 LAT O Data latch 10 CLK O

Clock

11 STB6 O Enable 6 12 STB5 O

Enable 5

13 STB4 O Enable 4 14 VDD O

Logic Power supply

15 STB3 O Enable 3 16 STB 2 O

Enable 2

17 STB1 O Enable 1 18 TH I

Thermistor

19 TH I Thermistor 20 GND —

Ground for head

21 GND —

Ground for head

22 VH O

Head driving power supply

23 VH O

Head driving power supply

24 N.C. —

Open terminal

25 SW1 O Head open switch* 26 SW2 I Head open switch*

27 MT/B O Stepping motor coil 28 MT/B O Stepping motor coil

excitation signal B excitation signal B

29 MT/A O Stepping motor coil 30 MT/A O Stepping motor coil

excitation signal A excitation signal A

* on MCL003 / MCL004/ MCL303#01 and MCL303#02 models

FTP-627MCL Series

NOT FOR NEW

DESIGN

■OPTIONS

emaNrebmuNtraP)mm(htgneL

elbaCecafretnI

dnadraobneewteb(

)tnempiuqe

)1NC(scinortneCroF102Y226-PTF005

)2NC(C232SRroF103Y226-PTF003

)01NC(elbacylppusrewoP104Y226-PTF003

deriuqerfi)5NC(rosnesrepapdneraeN-PTF

Andere Handbücher für FTP-627 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fujitsu Drucker Handbücher

Fujitsu

Fujitsu RS-232C Bedienungsanleitung

Fujitsu

Fujitsu FTP-632MCL001 Bedienungsanleitung

Fujitsu

Fujitsu FTP-629DCL014R Bedienungsanleitung

Fujitsu

Fujitsu FTP-651MCL101 Bedienungsanleitung

Fujitsu

Fujitsu DL1100 Bedienungsanleitung

Fujitsu

Fujitsu DL2600 Bedienungsanleitung

Fujitsu

Fujitsu Impact 3650 Bedienungsanleitung

Fujitsu

Fujitsu FTP-628MCL101 Bedienungsanleitung

Fujitsu

Fujitsu FTP-631MCL201 Bedienungsanleitung

Fujitsu

Fujitsu PrintPartner 10W Bedienungsanleitung

Fujitsu

Fujitsu FTP-628WSL220 Series Bedienungsanleitung

Fujitsu

Fujitsu DL5800 Bedienungsanleitung

Fujitsu

Fujitsu DL9300 Bedienungsanleitung

Fujitsu

Fujitsu fi-4530C Konfigurationshandbuch

Fujitsu

Fujitsu Print partner 14 AV Bedienungsanleitung

Fujitsu

Fujitsu M304X series Installations- und Betriebshandbuch

Fujitsu

Fujitsu PrintPartner 20W Bedienungsanleitung

Fujitsu

Fujitsu PrintPartner 10 Bedienungsanleitung

Fujitsu

Fujitsu ScanSnap iX100 Bedienungsanleitung

Fujitsu

Fujitsu DL7400 Bedienungsanleitung

Fujitsu

Fujitsu DL 1000 Bedienungsanleitung

Fujitsu

Fujitsu DL900 Bedienungsanleitung

Fujitsu

Fujitsu VM4 Bedienungsanleitung

Fujitsu

Fujitsu DX2100 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung