Fujitsu FTP-631MCL351 Bedienungsanleitung
FTP-631MCL351/352
■OVERVIEW
This thermal printer (driven by VDC 24) and cutter provide high
speed printing for 3- inch wide paper (85 mm). This printer is small in
size, light weight, and has low power consumption. The print head is
desined with open construction for easy maintenance.
This printer is suitable for the variety of applications, such as POS
terminals, ticket machines, label printers, measuring devices and
medical equipment.
In addition to the interface board, a driving LSI (MCU + Gate Array) is
also available.
■HIGHLIGHTS
• Ultra high speed printing
It can print at 100 mm/s (800 dotlines/s) by using Fujitsu
Components' unique head drive control system.
• Auto cutter
Full or partial cutting are available by normal or reverse rotation of
the motor (command set).
• Low power consumption
The peak current for head driving is approximately 2.6 A (at 50
mm/s printing speed, 50% printing ratio).
• Easy head access
Head-open construction makes head maintenance easy,
especially for head cleaning.
• Paper auto loading function
The thermal paper can be loaded without head-up lever
operation.
• High resolution
8 dots/mm head provides clear print output.
• Selectable paper paths
Front or rear insertion types are available.
24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER
3” MECHANISM, WITH AVAILABLE CUTTER
FTP-631MCL351/352 shown after
assembly with FTP-631CT001cutter
FTP-621DCL013
FTP-621CU102, FTP-633GA101
1
2
FTP-631MCL351/352
■DESIGNATION
Part number
Front paper insertion type
Rear paper insertion type
FTP-631MCL351
FTP-631MCL352
FTP-631CT001
FTP-621DCL013
FTP-621CU102
FTP-633GA101
Item
Printer mechanism
Micro Controller Unit
Gate Array
LSI
Interface board
Cutter
Printing method Thermal-sensitive line dot method
Dot structure 576 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 72 mm
Number of columns 48 columns/line (maximum)—Alphanumeric KANA
Maximum printing speed 800 dot lines/s (100 mm/s) maximum
JIS ANK : 128 International characters : 130
Character types Semi-graphic : 63 ASCII small characters : 31
Download : 384
24 ×12 dots, (3.0 ×1.5 mm), 48 columns
32 ×16 dots, (4.0 ×2.0 mm), 36 columns
24 ×24 dots, (3.0 ×3.0 mm), 24 columns
32 ×32 dots, (4.0 ×4.0 mm), 18 columns
Interface 1) Centronics standard 2) Bus interface*1
Cutting method Guillotine method
Cutting type Full-cut or partial cut (command set)
Minimum cut length 20 mm
Paper thickness 65 to 150 µm
■GENERAL SPECIFICATIONS
SpecificationsItem
Character composition, dimensions (H×W),
Number of columns (standard)
(Continued)
Cutter
3
FTP-631MCL351/352
24 VDC ±5%, average:*2
0.55 (0.56) A (at 25 mm/s printing speed, 25% printing ratio)
For head 0.84 (1.11) A (at 50 mm/s printing speed, 25% printing ratio)
3.23 (4.29) A (at 50 mm/s printing speed, 100% printing ratio)
( ): Peak
For motor 24 VDC ±5%, 1.0 A maximum
For logic 5 VDC ±5%, 0.5 A maximum
Weight Mechanism with cutter: approx. 540 g. Interface board: approx. 100 g
Mechanism + cutter 132 (W) ×60 (D) ×71.0 (H) mm (Excluding connector)
Interface board 140 (W) ×89 (D) ×24.0 (H) mm
Pulse durability : 5 ×107pulse/dot (usingFujitsu Takamisawa's standard
driving method)
Wear resistance: 50 km (at 12.5% printing ratio)
Cutter Cutting life: 3 ×105times
Operating temperature +5 to +40°C*3
Operating humidity 20 to 85% RH (no condensation)
Storage temperature –20 to +60°C (excluding paper)
Storage humidity 5 to 95% RH (no condensation)
Head temperature By thermistor (applied energy control, abnormal temperature detection)
Detection Paper out/Mark detect By photointerrupter (command set)
Head-up By microswitch
Paper width 85 mm
1 ply paper in roll : FTP-030P0020
SpecificationsItem
(Continued)
Power supply
Dimension
Thermal head
Life
Environmental
condition
+0
–1
Recommended thermal sensitive
paper*4
*1: The data to be printed is automatically read out by the printer driver equipment memory (host system frame
memory). The communication is parameter transfer.
*2: At 25°C, maximum applied voltage, minimum head resistance, specified paper, stable printing ratio.
*3: Temperature range for guaranteed printing density. It can operate at 0 to +40°C.
*4: Please contact us for other thermal papers.
4
FTP-631MCL351/352
■DIMENSIONS
Printer mechanism with cutter
Unit: mm
JAPAN
68 (At cutter open)
60
35.5 (Mounting hole)
40.5
12
7.5 (300)
71
(76)
<FTP-631MCL351>
<FTP-631MCL352>
Paper insertion
SECTION Y-Y
11.8
Y
Y
2-M3 Burring
25.4
(Mounting screw)
2.5 (Mounting hole)
52.1 (Center of paper & connector)
106.2 (Mounting hole)
132
21.9
14.2
315
94.8
Paper insertion
Note:
All dimensions are nominal value.
5
FTP-631MCL351/352
Interface board
CN3 CN4 CN2
CN5 CN1 CN10
CN11
CN7
Height of devices side
Height of solder side
17
5
23.6
139.7
129.6
113.1
22.9 14.0
(5.1)
88.9
78.8
(5.1)
(5.1)
14.0
88.9 (5.1)
(5.1)
28.0
25.4
4—ø3.6
1.6
CN12 CN13
22.3 27.4
31.8
CN6
15.3
Unit: mm
■INTERFACE, COMMAND, OPTIONS
Please refer to the FTP-621DCL003/013 DATA SHEET for Interface, Command, and Options.
6
FTP-631MCL351/352
© 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 09/2001
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: www.fcai.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: www.fceu.fujitsu.com
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 375-8560
Fax: (65) 273-3021
Email: [email protected]
www.fcal.fujitsu.com
Fujitsu Components
International
Headquarter
Offices
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Fujitsu Drucker Handbücher
Fujitsu
Fujitsu FTP-629DCL014R Bedienungsanleitung
Fujitsu
Fujitsu DL7400 Bedienungsanleitung
Fujitsu
Fujitsu FTP-628MCL401 Bedienungsanleitung
Fujitsu
Fujitsu FTP-631MCL301 Bedienungsanleitung
Fujitsu
Fujitsu DL6600PRO - DL 6600 Pro B/W Dot-matrix... Bedienungsanleitung
Fujitsu
Fujitsu PrintPartner 16ADV Installationshandbuch
Fujitsu
Fujitsu FTP-627MCL054 Bedienungsanleitung
Fujitsu
Fujitsu DX2100 Bedienungsanleitung
Fujitsu
Fujitsu FTP-627 Series Bedienungsanleitung
Fujitsu
Fujitsu DL6400PRO Bedienungsanleitung
Fujitsu
Fujitsu ApeosPrint C4030 Bedienungsanleitung
Fujitsu
Fujitsu FTP628 MCL383 Bedienungsanleitung
Fujitsu
Fujitsu C145-C037-01EN Technische Daten
Fujitsu
Fujitsu PrintPartner Bedienungsanleitung
Fujitsu
Fujitsu DL2600 Bedienungsanleitung
Fujitsu
Fujitsu fi-7480 Bedienungsanleitung
Fujitsu
Fujitsu fi-4x20 SERIES Konfigurationshandbuch
Fujitsu
Fujitsu Print partner 14 AV Bedienungsanleitung
Fujitsu
Fujitsu DL7600 Bedienungsanleitung
Fujitsu
Fujitsu FTP-641MCL351 Bedienungsanleitung
