Fujitsu PRIMEQUEST 2000 Series Service-Handbuch

C122-E178-02EN

FUJITSU Server

PRIMEQUEST

2000 Series

Message Reference

Preface

C122-E178-02EN

Preface

This manual describes the functions and features of the PRIMEQUEST 2000 series. The manual is intended for system

administrators.

For details on the regulatory compliance statements and safety precautions, see the PRIMEQUEST 2000 Series Safety

and Regulatory Information (C122-E171XA).

Errata and addenda for the manual

The PRIMEQUEST 2000 Series Errata and Addenda (C122-E182EN) provides errata and addenda for the manual.

Read the PRIMEQUEST 2000 Series Errata and Addenda (C122-E182EN) thoroughly in reference to the manual.

Organization of this manual

This manual is organized as follows.

CHAPTER 1 Message Overview

Chapter 1 describes how to read PRIMEQUEST 2000 series messages.

CHAPTER 2 MMB Messages

Chapter 2 lists MMB messages by type.

CHAPTER 3 Dynamic Reconfiguration Messages

Chapter 3 lists Dynamic Reconfiguration messages.

CHAPTER 4 sadump Messages

Chapter 4 lists sadump messages.

Appendix A Replacement component list

Appendix A lists replacement component for Unit/Source in MMB SEL message.

Preface

C122-E178-02EN

Revision History

Edition Date Revised location (type) (*1) Description

1 2014-02-18 - -

2 2014-04-10 CHAPTER2 MMB Message Updated and added MMB messages

*1: Chapter, section, and item numbers in the "Revised location" column refer to those in the latest edition of the

document. However, a number marked with an asterisk (*) denotes a chapter, section, or item in a previous

edition of the document.

Preface

iii

C122-E178-02EN

Product operating environment

This product is a computer intended for use in a computer room environment. For details on the product operating

environment, see the following manual:

PRIMEQUEST 2000 Series Hardware Installation Manual (C122-H007EN)

Safety Precautions

Alert messages

This manual uses the following alert messages to prevent users and bystanders from being injured and to prevent

property damage.

This indicates a hazardous (potentially dangerous) situation that is likely to result in death or serious

personal injury if the user does not perform the procedure correctly.

This indicates a hazardous situation that could result in minor or moderate personal injury if the user

does not perform the procedure correctly. This also indicates that damage to the product or other

property may occur if the user does not perform the procedure correctly.

This indicates information that could help the user use the product more efficiently.

Alert messages in the text

An alert statement follows an alert symbol. An alert statement is indented on both ends to distinguish it from regular text.

Similarly, one space line is inserted before and after the alert statement.

Only Fujitsu certified service engineers should perform the following tasks on this product and the

options provided by Fujitsu. Customers must not perform these tasks under any circumstances.

Otherwise, electric shock, injury, or fire may result.

- Newly installing or moving equipment

- Removing the front, rear, and side covers

- Installing and removing built-in options

- Connecting and disconnecting external interface cables

- Maintenance (repair and periodic diagnosis and maintenance)

The List of important alert items table lists important alert items.

Preface

C122-E178-02EN

List of important alert items

This manual does not contain important alert items.

Warning labels

Never remove the warning labels.

Warning label location (the main cabinet top)

Preface

C122-E178-02EN

Warning label location (the main cabinet left)

Warning label location (PCI_Box)

Preface

C122-E178-02EN

Notes on Handling the Product

About this product

This product is designed and manufactured for standard applications. Such applications include, but are not limited to,

general office work, personal and home use, and general industrial use. The product is not intended for applications that

require extremely high levels of safety tobe guaranteed (referred to below as "safety-critical" applications). Use of the

product for a safety-critical application may present a significant risk of personal injury and/or death. Such applications

include, but are not limited to, nuclear reactor control, aircraft flight control, air traffic control, mass transit control, medical

life support, and missile launch control. Customers shall not use the product for a safety-critical application without

guaranteeing the required level of safety. Customers who plan to use the product in a safety-critical system are requested

to consult the Fujitsu sales representatives in charge.

Storage of accessories

Keep the accessories in a safe place because they are required for server operation.

Adding optional products

For stable operation of the PRIMEQUEST 2000 series server, use only a Fujitsu-certified optional product as an added

option.

Note that the PRIMEQUEST 2000 series server is not guaranteed to operate with any optional product not certified by

Fujitsu.

Exportation/release of this product

Exportation/release of this product may require necessary procedures in accordance with the regulations of the Foreign

Exchange and Foreign Trade Control Law of Japan and/or US export control laws.

Maintenance

Only Fujitsu certified service engineers should perform the following tasks on this product and the

options provided by Fujitsu. Customers must not perform these tasks under any circumstances.

Otherwise, electric shock, injury, or fire may result.

- Newlyinstalling or moving equipment

- Removing the front, rear, and side covers

- Installing and removing built-in options

- Connecting and disconnecting external interface cables

- Maintenance (repair and periodic diagnosis and maintenance)

Only Fujitsu certified service engineers should perform the following tasks on this product and the

options provided by Fujitsu. Customers must not perform these tasks under any circumstances.

Otherwise, product failure may result. PRIMEQUEST 2000 Series General Description

- Unpacking an optional Fujitsu product, such as an optional adapter, delivered to the customer

Modifying or recycling the product

Modifying this product or recycling a secondhand product by overhauling it without prior approval

may result in personal injury to users and/or bystanders or damage to the product and/or other

property.

Preface

vii

C122-E178-02EN

Note on erasing data from hard disks when disposing of the product or transferring it

Disposing of this product or transferring it as is may enable third parties to access the data on the hard disk and use it for

unforeseen purposes. To prevent the leakage of confidential information and important data, all of the data on the hard

disk must be erased before disposal or transfer of the product.

However, it can be difficult to completely erase all of the data from the hard disk. Simply initializing (reformatting) the hard

disk or deleting files on the operating system is insufficient to erase the data, even though the data appears at a glance to

have been erased. This type of operation only makes it impossible to access the data from the operating system.

Malicious third parties can restore this data.

If you save your confidential information or other important data on the hard disk, you should completely erase the data,

instead of simply carrying out the aforementioned operation, to prevent the data from being restored. To prevent important

data on the hard disk from being leaked when the product is disposed of or transferred, you will need to take care to erase

all the data recorded on the hard disk on your own responsibility.

Furthermore, if a software license agreement restricts the transfer of the software (operating system and application

software) on the hard disk in the server or other product to a third party, transferring the product without deleting the

software from the hard disk may violate the agreement. Adequate verification from this point of view isalso necessary.

Product and service inquiries

For all product use and technical inquiries, contact the distributor where you purchased your product, or a Fujitsu sales

representative or systems engineer (SE). If you do not know the appropriate contact address for inquiries about the

PRIMEQUEST 2000 series, use the Fujitsu contact line.

Fujitsu contact line

We acceptWeb inquiries. For details, visit our website:

https://www-s.fujitsu.com/global/contact/computing/PRMQST_feedback.html

Warranty

If a component failure occurs during the warranty period, we will repair it free of charge in accordance with the terms of the

warranty agreement. For details, see the warranty.

Before requesting a repair

If a problem occurs with the product, confirm the problem by referring to 11.2 Troubleshooting in the PRIMEQUEST 2000

Series Administration Manual (C122-E175ENEN). If the error recurs, contact your sales representative or a field engineer.

Confirm the model name and serial number shown on the label affixed to the right front of the device and report it. Also

check any other required items beforehand according to 11.2 Troubleshooting in the PRIMEQUEST 2000 Series

Administration Manual (C122-E175ENEN).

The system settings saved by the customer will be used during maintenance.

Preface

viii

C122-E178-02EN

Manual

How to use this manual

This manual contains important information about the safe use of this product. Read the manual thoroughly to understand

the information in it before using this product. Be sure to keep this manual in a safe and convenient location for quick

reference.

Fujitsu makes every effort to prevent users and bystanders from being injured and to prevent property damage. Be sure to

use the product according to the instructions in this manual.

Exportation/release of this document may require necessary procedures in accordance with the regulations of the Foreign

Exchange and Foreign Trade Control Law of Japan and/or US export control laws.

Manuals for the PRIMEQUEST 2000 series

The following manuals have been prepared to provide you with the information necessary to use the PRIMEQUEST 2000

series.

You can access HTML versions of these manuals at the following sites:

Japanese-language site: http://jp.fujitsu.com/platform/server/primequest/manual/2000

Global site: http://www.fujitsu.com/global/services/computing/server/primequest/

http://manuals.ts.fujitsu.com/

Title

Description

Manual code

PRIMEQUEST 2000 Series Getting

Started Guide Describes what manuals you should read and how to access

important information after unpacking the PRIMEQUEST 2000

series server. (This manual comes with the product.)

C122-E170XA

PRIMEQUEST 2000 Series Safety

and Regulatory Information Contains important information required for using the

PRIMEQUEST 2000 series safely. C122-E171XA

PRIMEQUEST 2000 Series Errata

and Addenda Provides errata and addenda for the PRIMEQUEST 2000 series

manuals. This manual will be updated as needed. C122-E182EN

PRIMEQUEST 2000 Series

General Description Describes the functions and features of the PRIMEQUEST 2000

series. C122-B025EN

SPARC Enterprise/ PRIMEQUEST

Common Installation Planning

Manual

Provides the necessary information and concepts you should

understand for installation and facility planning for SPARC

Enterprise and PRIMEQUEST installations.

C120-H007EN

PRIMEQUEST 2000 Series

Hardware Installation Manual Includes the specifications of and the installation location

requirements for the PRIMEQUEST 2000 series. C122-H007EN

PRIMEQUEST 2000 Series

Installation Manual Describes how to set up the PRIMEQUEST 2000 series server,

including the steps for installation preparation, initialization, and

software installation.

C122-E174EN

PRIMEQUEST 2000 Series User

Interface Operating Instructions Describes how to use theWeb-UI and UEFI to assure proper

operation of the PRIMEQUEST 2000 series server. C122-E176EN

PRIMEQUEST 2000 Series

Administration Manual Describes how to use tools and software for system administration

and how to maintain the system (component replacement and

error notification).

C122-E175EN

Preface

C122-E178-02EN

Title

Description

Manual code

PRIMEQUEST 2000 Series Tool

Reference Provides information on operation methods and settings, including

details on the MMB and UEFI functions. C122-E177EN

PRIMEQUEST 2000 Series

Message Reference Lists the messages that may be displayed when a problem occurs

during operation and describes how to respond to them. C122-E178EN

PRIMEQUEST 2000 Series

REMCS Installation Manual Describes REMCS service installation and operation C122-E180EN

PRIMEQUEST 2000 Series

Glossary Defines the PRIMEQUEST 2000 series related terms and

abbreviations. C122-E179EN

Related manuals

The following manuals relate to the PRIMEQUEST 2000 series.

You can access these manuals at the following site:

http://www.fujitsu.com/global/services/computing/server/primequest/

http://manuals.ts.fujitsu.com/

Contact your sales representative for inquiries about the ServerView manuals.

Title

Description

Manual code

ServerView Suite ServerView

Operations Manager Quick

Installation (Windows)

Describes how to install and start ServerView Operations

Manager in a Windows environment. None

ServerView Suite ServerView

Operations Manager Quick

Installation (Linux)

Describes how to install and start ServerView Operations

Manager in a Linux environment. None

ServerView Suite ServerView

Installation Manager Describes the installation procedure using ServerView Installation

Manager. None

ServerView Suite ServerView

Operations Manager Server

Management

Provides an overviewof servermonitoring using ServerView

Operations Manager, and describes the user interface of

ServerView Operations Manager.

None

ServerView Suite ServerView

RAID Management User Manual Describes RAID management using ServerView RAID Manager. None

ServerView Suite Basic Concepts Describes basic concepts about ServerView Suite. None

ServerView Operations Manager

Installation ServerView Agents for

Linux

Describes installation and update installation of ServerView Linux

Agent. None

ServerView Operations Manager

Installation ServerView Agents for

Windows

Describes installation and update installation of ServerView

Windows Agent. None

ServerView Mission Critical

Option User Manual Describes the necessary functions unique to PRIMEQUEST

(cluster linkage) and ServerView Mission Critical Option (SVmco),

which is required for supporting these functions.

None

ServerView RAID Manager

VMware vSphere ESXi 5

Installation Guide

Describes the installation and settings required to use ServerView

RAID Manager on the VMware vSphere ESXi 5 server. None

Andere Handbücher für PRIMEQUEST 2000 Series

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu PRIMERGY BX920 S2 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5120 Installations- und Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY RX330 S1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY H200 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX100 S3 Bedienungsanleitung

Fujitsu

Fujitsu FUTRO A300 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 3800E Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Installationsanleitung

Fujitsu

Fujitsu PRIMERGY TX200 S5 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY ECONEL30 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX1320 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX1320 M3 Bedienungsanleitung

Fujitsu

Fujitsu BS2000 SE Series Bedienungsanleitung

Fujitsu

Fujitsu Primergy BX2560 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX620 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX1320 M4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY CX2550 M6 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX620 S6 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY CX420 S1 Benutzerhandbuch

Fujitsu

Fujitsu SPARC M10-4 Bedienungsanleitung

Fujitsu

Fujitsu Primergy TX300 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX120 S3p Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M8000 Installationsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung