Fujitsu Primergy RX200 S4 Betriebsanleitung

PRIMERGY RX200 S4 Server

Service Supplement

Edition January 2008

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected].

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

RX200 S4 Service Supplement

Contents

1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Overview of the documentation . . . . . . . . . . . . . . . . . 5

1.2 Notational conventions . . . . . . . . . . . . . . . . . . . . . 7

2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3 Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4 Replacement routines . . . . . . . . . . . . . . . . . . . . . 17

4.1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.1.1 Pulling out / removing the server . . . . . . . . . . . . . . . . 17

4.1.2 Opening/closing the server . . . . . . . . . . . . . . . . . . . 19

4.1.3 Removing the air duct . . . . . . . . . . . . . . . . . . . . . . 19

4.2 Replacing the front panel module . . . . . . . . . . . . . . . 20

4.3 Replacing the chassis ID / temperature sensor . . . . . . . 22

4.4 Replacing the fan board . . . . . . . . . . . . . . . . . . . . 22

4.5 Replacing the SAS board for 3.5-inch drives . . . . . . . . . 24

4.6 Replacing the SAS board for 2.5-inch drives . . . . . . . . . 25

4.7 Replacing the power-distribution module . . . . . . . . . . 26

4.8 Replacing the system board . . . . . . . . . . . . . . . . . . 27

Service Supplement RX200 S4

Contents

5 Board layout . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

5.1 Front panel module . . . . . . . . . . . . . . . . . . . . . . . 31

5.2 SAS boards . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

5.2.1 SAS board for 3.5-inch drives . . . . . . . . . . . . . . . . . . . 32

5.2.2 SAS board for 2.5-inch drives . . . . . . . . . . . . . . . . . . . 33

5.3 Fan board . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

5.4 Power-distribution module . . . . . . . . . . . . . . . . . . . 35

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

RX200 S4 Service Supplement 5

1 Preface

The PRIMERGY RX200 S4 server is an Intel-based server for mid-size

networks and large companies. The server is suitable for use as a file server

and also as an application, information or Internet server.

1.1 Overview of the documentation

Concept and target groups

This Service Supplement completes the information given in the Operating

Manual, the Options Guide and the Technical Manual of the system board.

The activities described in this manual may only be performed by service

personnel.

Service DVD

Service partners of Fujitsu Siemens can order a Service DVD PRIMERGY. On

the DVD the following manuals are available in pdf format:

– The “Safety notes and other important information” manual

– The Operating Manual for the PRIMERGY RX200 S4

– The Technical Manual for the system board D2671

– The Options Guide for the PRIMERGY RX200 S4

– The Service Supplement for the PRIMERGY RX200 S4

– The “BIOS Setup” manual

6 Service Supplement RX200 S4

Overview of the documentation Preface

Information/activity Manual

Detailed safety notes “Safety notes and other

important information“

manual

Features and technical data of the server Operating Manual

Installation and operation, among other things:

– External ports

– Operation

– Configuration of the server

– Installation of the rack mounting kit

Troubleshooting

Installation/removal or replacing of the CSS

components:

– Hot-plug power supply units

– Hot-plug HDD modules

– Hot-plug system fans

– Memory modules

– Expansion boards

Information about the system board:

– Features of the system board

– Connector assignment

– Jumper settings

– Replacing the battery

Technical Manual

Extensions and upgrades:

IFor some components only the installation

routine is described in the Options Guide.

Removing these components proceed in

reverse order.

– Installing a second processor/replacing the

processor/heat sink

– Extending/replacing the main memory

– Installing an accessible drive

– Installing LSP/LSD

– Installing expansion boards

– Installing an iBBU

– Cabling

Options Guide

Table 1: Overview of the documentation (part 1 of 2)

RX200 S4 Service Supplement 7

Notational conventions

1.2 Notational conventions

The following notational conventions are used in this manual:

Replacement routines:

– Replacing the front panel module

– Replacing the chassis ID/temperature sensor

– Replacing the fan board

– Replacing the SAS board for 3.5-inch drives

– Replacing the SAS board for 2.5-inch drives

– Replacing the power-distribution module

– Replacing the system board

Service Supplement

Board layout

BIOS setup “BIOS Setup“ manual

Italics indicates commands or menu items.

“Quotation marks” indicate names of chapters and terms that are being

emphasized.

Êdescribes activities that must be performed in the order

shown.

VCAUTION! pay particular attention to texts marked with this symbol.

Failure to observe this warning may endanger your life,

destroy the system or lead to the loss of data.

Iindicates additional information, notes and tips.

Table 2: Notational conventions

Information/activity Manual

Table 1: Overview of the documentation (part 2 of 2)

RX200 S4 Service Supplement 9

2Procedure

VCAUTION!

The actions described in these instructions should only be performed by

service personnel.

ÊFirst of all please familiarize yourself with the safety instructions in the

chapter “Safety notes” on page 11f.

ÊEnsure that all required manuals (see Service DVD) are available, printing

out the PDF files if necessary. You will definitely need the Operating Manual

for the server, the Options Guide for the server and the Technical Manual for

the system board.

ÊShut down the server correctly, switch it off, pull out the power plug, and

open the server as described in the chapter “Replacement routines” on

page 17ff.

ÊReplace the defective component, as described in the relevant chapter.

ÊClose the server.

ÊConnect the cables.1

ÊConnect the server to the power outlet.1

ÊStart the operating system.1

ÊIf necessary, perform the relevant configuration.1

1These procedures are described in the Operating Manual.

Andere Handbücher für Primergy RX200 S4

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu FW-S Series SERVIS Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Bedienungs- und Wartungsanleitung

Fujitsu

Fujitsu PRIMERGY RX330 S1 Betriebsanleitung

Fujitsu

Fujitsu PRIMEQUEST 500A Series Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M4000 Handbuch

Fujitsu

Fujitsu PRIMERGY RX900 S1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX900 S2 Bedienungsanleitung

Fujitsu

Fujitsu FUTRO S720 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX1330 M4 Bedienungsanleitung

Fujitsu

Fujitsu SPARC ENTERPRISE T1000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX1330 M1 Bedienungsanleitung

Fujitsu

Fujitsu SPARC M10-1 Bedienungsanleitung

Fujitsu

Fujitsu SPARC ENTERPRISE T1000 Bedienungsanleitung

Fujitsu

Fujitsu SPARC M12 Series Installations- und Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX4770 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX800 S2 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M4000 Technisches Datenblatt

Fujitsu

Fujitsu PRIMERGY CX120 S1 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY 10/40GbE Connection Blade 18/8+2 Stücklistenhandbuch

Fujitsu

Fujitsu PRIMERGY Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY Econel 50 Betriebsanleitung

Fujitsu

Fujitsu BS2000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX200 S7 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung