Fujitsu Primergy RX100 S3 Bedienungsanleitung

PRIMERGY

PRIMERGY RX100 S3

Server System

Operating Manual

Xenia Fierley

Fujitsu Siemens Computers GmbH

cognitas PS

81730 München

e-mail: e-mail:[email protected]

Tel.: (089) 61001-157

Fax: (++49) 700 / 372 00000

U41615-J-Z156-1-76

Sprachen: En

Edition August 2005

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Fax forms for sending us your comments are included in

the back of the manual.

There you will also find the addresses of the relevant

User Documentation Department.

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

U41615-J-Z156-1-76

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Overview of the Documentation . . . . . . . . . . . . . . . . . . 5

1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.3 Notational Conventions . . . . . . . . . . . . . . . . . . . . . . 9

1.4 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2 Installation Steps: Overview . . . . . . . . . . . . . . . . . 13

3 Important Notes . . . . . . . . . . . . . . . . . . . . . . . . 15

3.1 Notes on Safety . . . . . . . . . . . . . . . . . . . . . . . . . 15

3.2 CE Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . 20

3.3 FCC Class A Compliance Statement . . . . . . . . . . . . . . 20

3.4 Transporting the Server . . . . . . . . . . . . . . . . . . . . . 21

3.5 Notes on Installing the Rack . . . . . . . . . . . . . . . . . . 22

3.6 Environmental Protection . . . . . . . . . . . . . . . . . . . . 22

4 Hardware Installation . . . . . . . . . . . . . . . . . . . . . 25

4.1 Installation Steps . . . . . . . . . . . . . . . . . . . . . . . . 25

4.2 Unpacking the Server . . . . . . . . . . . . . . . . . . . . . . 26

4.3 Installing/Removing the Server into/from the Rack . . . . . . . 27

4.3.1 Requirements of the Rack . . . . . . . . . . . . . . . . . . . . 28

4.3.2 Necessary Parts . . . . . . . . . . . . . . . . . . . . . . . . . 31

4.3.3 Preparing the Server . . . . . . . . . . . . . . . . . . . . . . 31

4.3.4 Mounting in the PRIMECENTER/DataCenter Rack . . . . . . . 32

4.3.5 Mounting in 3rd-Party Racks . . . . . . . . . . . . . . . . . . 34

4.3.6 Installing the Server . . . . . . . . . . . . . . . . . . . . . . . 35

4.4 Connecting Devices to the Server . . . . . . . . . . . . . . . . 36

4.4.1 Connecting the Monitor . . . . . . . . . . . . . . . . . . . . . 37

4.5 Connecting the Server to the Mains . . . . . . . . . . . . . . . 37

4.6 Instructions on Connecting and Disconnecting Cables . . . . . 38

5 Preparation for Use/Operation . . . . . . . . . . . . . . . . 39

5.1 Operating and Indicator Elements . . . . . . . . . . . . . . . . 39

5.1.1 The Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

5.1.2 The Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

5.2 Switching the Server ON/OFF . . . . . . . . . . . . . . . . . . 44

5.3 Configuring the Server . . . . . . . . . . . . . . . . . . . . . 46

5.3.1 Hard Disk Write Cache . . . . . . . . . . . . . . . . . . . . . 46

5.3.2 Configuration with ServerStart . . . . . . . . . . . . . . . . . 47

5.3.3 Configuration without ServerStart . . . . . . . . . . . . . . . . 48

5.4 Cleaning the Server . . . . . . . . . . . . . . . . . . . . . . . 49

U41615-J-Z156-1-76

Contents

6 Problem Solutions and Tips . . . . . . . . . . . . . . . . . . 51

6.1 Power-ON Indicator Remains Dark . . . . . . . . . . . . . . . 51

6.2 The Server Switches Itself OFF . . . . . . . . . . . . . . . . . 52

6.3 The Monitor Remains Dark . . . . . . . . . . . . . . . . . . . 52

6.4 Flickering Stripes Across the Monitor . . . . . . . . . . . . . . 53

6.5 No Monitor Display or Display Drifts . . . . . . . . . . . . . . . 53

6.6 No Mouse Pointer Displayed on the Monitor . . . . . . . . . . 53

6.7 Time and/or Date are Incorrect . . . . . . . . . . . . . . . . . 54

6.8 System Fails to Boot . . . . . . . . . . . . . . . . . . . . . . 54

6.9 Error Messages on the Monitor . . . . . . . . . . . . . . . . . 54

7 Property and Data Protection . . . . . . . . . . . . . . . . . 55

7.1 BIOS Setup security functions . . . . . . . . . . . . . . . . . 55

8 Hot-plug Hard Disk Drives . . . . . . . . . . . . . . . . . . . 57

8.1 Handling HDD Modules . . . . . . . . . . . . . . . . . . . . . 58

8.2 Installing/Removing a HDD/Dummy Module . . . . . . . . . . 59

Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

U41615-J-Z156-1-76 5

1Introduction

The PRIMERGY RX100 S3 server is an Intel-based server for small and

medium-sized networks and can be mounted into both, rack systems of the

Fujitsu Siemens Computers GmbH and present rack systems from different

manufacturers.

The PRIMERGY RX100 S3 server offers a high level of reliability and availability

through highly developed hardware and software components. These include

the ServerView server management software, Prefailure Detection and

Analyzing (PDA) and Automatic Server Reconfiguration and Restart (ASR&R).

Security functions in the BIOS Setup and on the system board protect the data

on the server against manipulation. Additional security is provided by the

lockable rack door.

The server occupies 1 height unit (HU) in the rack.

1.1 Overview of the Documentation

IPRIMERGY manuals are available in PDF format on the ServerBooks CD.

The ServerBooks CD is part of the ServerView Suite delivered with each

server system.

The PDF files for the manuals can also be downloaded free of charge

from the Internet. The overview page showing the online documentation

available on the Internet can be found via the URL:

http://manuals.fujitsu-siemens.com. For the documentation of the

PRIMERGY servers choose the navigation point industry standard servers.

Concept and Target Group of this Manual

This operating manual describes how to install and how to operate your server.

This operating manual is intended for those responsible for installing the

hardware and operating the system. The manual contains all the information

required for mounting and operating your PRIMERGY RX100 S3.

To understand the different expansion options, you need a knowledge of

hardware and data transmission, as well as basic knowledge of the operating

system used.

6 U41615-J-Z156-1-76

Overview of the Documentation Introduction

Additional components of the server documentation

To the PRIMERGY RX100 S3 documentation set belong the following additional

manuals:

– “Quick Start Hardware - PRIMERGY RX100 S3” (poster)

– “Quick Start Software - PRIMERGY ServerView Suite” (poster)

– “Warranty” manual (print version delivered together with the system, PDF file

available on the ServerBooks CD)

– “Safety” manual (print version delivered together with the system, PDF file

available on the ServerBooks CD)

– “Ergonomics” manual (PDF file available on the ServerBooks CD)

– “Returning used devices” (PDF file available on the ServerBooks CD)

– “Helpdesk” (poster with worldwide helpdesk telephone numbers)

– “PRIMERGY RX100 S3 Serversystem Options Guide” (PDF file available on

the ServerBooks CD)

– Technical Manual for the system board D2004 (PDF file available on the

ServerBooks CD)

– “BIOS Setup” manual (PDF file available on the ServerBooks CD)

– “ServerView Suite” includes the ServerStart CD, the ServerBooks CD and the

print version of the manual “PRIMERGY ServerView Suite - ServerStart”.

The PDF file of the manual is also available on the ServerBooks CD.

IIf you need a backup of the ServerBooks CD, send the details of your

server via email address: [email protected].

– “Global Array Manager Client Software User’s Guide” (PDF file available on

the ServerBooks CD)

– “Global Array Manager Server Software User’s Guide” (PDF file available on

the ServerBooks CD)

– “LSI SATA Software RAID User’s Guide” (PDF file available on the

ServerBooks CD)

Further sources of information

– Technical Manual for the rack

– manual for the monitor

– server management manual ServerView

– manual for the Remote Test and Diagnostic System RemoteView

– operating system documentation

– information files of your operating system

(see also “Related publications” on page 63).

U41615-J-Z156-1-76 7

Introduction Features

1.2 Features

System Board

The features of the system board can be found in the Technical Manual of the

system board D2004 for the hardware and in the “BIOS Setup” for the firmware

(see “Related publications” on page 63).

Hard Disk Drives

The server may have a maximum of two hard disk drives with SATA interface.

There are two server variants:

– Server with non hot-plug hard disk drives (mounted in an “easyChange” hard

disk carrier)

– Server with hot-plug hard disk drives (see “Hot-plug Hard Disk Drives” on

page 57)

The different features of each server variant are described in the appropriate

sections of this manual.

Accessible Drives

An CD or DVD drive is available.

Power Supply

The server has a fixed, wide range power supply unit that adjusts automatically

to a power voltage in the range from 100 V - 127 V or 200 V - 240 V.

High Level of Availability and Reliability

When memory data are accessed, 1-bit errors in the main memory are recog-

nized and automatically corrected with the ECC (Error Correcting Code)

method.

ASR&R (Automatic Server Reconfiguration and Restart) restarts the system in

the case of an error and automatically ”hides“ the defective system components.

The PDA (Prefailure Detection and Analyzing) technology from Fujitsu Siemens

Computers analyzes and monitors all components important for system

reliability.

8 U41615-J-Z156-1-76

Features Introduction

Server Management

Server management is implemented with the aid of the supplied ServerView

software and PDA (Prefailure Detection and Analyzing) technology from Fujitsu

Siemens Computers. PDA reports early the threat of a system error or

overloading so that preventative measures can be taken.

ServerView enables the management of all PRIMERGY servers in the network

via a central console. Here ServerView supports the following functions:

●Remote startup (Wakeup On LAN)

●Temperature monitoring of the CPU and the surrounding area

●Power monitoring

●End-of-life monitoring of the fans with timely notification before a failure

●Watchdog timer for operating system monitoring and application monitoring

with ASR&R

Further information on the ServerView server management is provided in the

associated documentation (see “Related publications” on page 63).

Server Management LAN (SM LAN)

The Server Management LAN is a direct communication interface between a

remote system and the local BMC. It is used for “Console Redirection” (text and

grafical) and for transferring e. g. power management commands from the

remote system to the BMC via LAN.

The LAN connection (only LAN port 1) (see section “Connecting Devices to the

Server” on page 36) can be exclusive for management or be shared with the

standard OS.

ServerStart

You can configure the PRIMERGY server quickly and precisely with the

ServerStart software provided. User-guided menus are available for installing the

server operating systems.

U41615-J-Z156-1-76 9

Introduction Notational Conventions

Service and Support

PRIMERGY server are service-friendly and modular, thus enabling quick and

simple maintenance. The flash EPROM program supplied with the Fujitsu

Siemens Computers utilities supports fast BIOS Update.

The optional RemoteView Remote Test and Diagnosis System allows the

PRIMERGY RX100 S3 Server to be maintained from remote locations. A

Remote Service Board (RSB) can be used in conjunction with RemoteView.

Together they facilitate a remote diagnosis for system analysis, remote configu-

ration, and remote restart should the operating system or hardware fail.

1.3 Notational Conventions

The following notational conventions are used in this manual:

Italics indicate commands, menu items or software programs.

“Quotation marks” indicate names of chapters and terms that should be

emphasized.

Êtext which follows this symbol describes activities that

must be performed in the order shown.

VCAUTION! pay particular attention to text marked with this symbol.

Failure to observe this warning may endanger your life,

damage the server, or lead to loss of data.

Isupplementary information, remarks, and tips follow

this symbol.

Table 1: Notational Conventions

10 U41615-J-Z156-1-76

Technical Data Introduction

1.4 Technical Data

Electrical Data

Compliance Standards

Rated voltage range 100 V - 127 V or 200 V - 240 V

Rated frequency 50 Hz - 60 Hz

Rated current in basic configuration: 100 V - 127 V / 1.86 A

200 V - 240 V / 0.98 A

Max. rated current: 100 V - 127 V / 4 A

200 V - 240 V / 2 A

Active power 254 W

Apparent power 254 VA

Thermal dissipation 914.4 kJ/h (866.68 btu/h)

Main power fuse 16 A (6.3 A)

Protection class I

Product safety and ergonomics IEC 60950 / EN 60950, UL 1950 3rd. Ed.,

CAN/CSA 22.2 No. 60950 3rd. Ed.

Electromagnetic Compatibility

(standard power supply)

FCC class A

VCCI class A /JEIDA

CNS 13438 class A

C-Tick class A

Emitted interference EN 55022 class A

Harmonic current EN 61000-3-2

Flicker EN 61000-3-3

Noise immunity EN 55024

CE label

according to EU directives

Low-Voltage Directive 73/23/EEC

Electromagnetic Compatibility 89/336/EEC

Andere Handbücher für Primergy RX100 S3

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu primergy h250 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEPOWER850 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX100 S3 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY BX600 S3 Montageanleitung

Fujitsu

Fujitsu Server PRIMERGY TX1330 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S6 Leitfaden

Fujitsu

Fujitsu PRIMERGY TX150 S3 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T2000 Service-Handbuch

Fujitsu

Fujitsu PRIMERGY RX200 S3 Betriebsanleitung

Fujitsu

Fujitsu SPARC Enterprise T2000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX100 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S2 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M3000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX120 S2 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M3000 Bedienungsanleitung

Fujitsu

Fujitsu SPARC M12 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX100 S2 Bedienungsanleitung

Fujitsu

Fujitsu Primergy N800 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Montageanleitung

Fujitsu

Fujitsu PRIMERGY GX2560 M7 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX400 S1 Bedienungsanleitung

Fujitsu

Fujitsu Primergy TX120 Leitfaden

Fujitsu

Fujitsu PRIMERGY BX620 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX200 S7 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung