Fujitsu BS2000 SE Series Bedienungsanleitung

English

Fujitsu Server BS2000 SE Series

Server Unit x86

Operating Manual

Valid for:

M2000 V6.5A

X2000 V6.5A

HNC V6.5A

Edition May 2023

Comments… Suggestions… Corrections…

The User Documentation Department would like to know your opinion on this manual. Your feedback helps us to

optimize our documentation to suit your individual needs.

Feel free to send us your comments by e-mail to: .[email protected]

Certified documentation according to DIN EN ISO 9001:2015

To ensure a consistently high quality standard and user-friendliness, this documentation was created to meet the

regulations of a quality management system which complies with the requirements of the standard DIN EN ISO

.9001:2015

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

The Xen® mark is a trademark of Citrix Systems, Inc., which manages the mark on behalf of the Xen open source

community. The Xen® mark is registered with the U.S. Patent and Trademark Office, and may also be registered in

other countries.

Novell and SUSE are registered brands of Novell, Inc. in the USA and other countries.

Linux is a registered brand of Linus Torvalds.

Windows® is a registered trademark of Microsoft Corporation.

The Linux-based basic software M2000, X2000, and HNC which is installed on the Management Unit, Server Unit

x86, and HNC contains Open Source Software. The licenses for this can be found in the LICENSES directory on

the relevant installation DVD.

Table of Contents
Server Unit x86 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Server Unit SU x86 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1 Switching the Server Unit on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2 Front of the Server Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.1 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.2 Indicators on the operating panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.3 Hard disks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.4 DVD-RW drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3 Rear of the Server Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
What to do if ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Server Unit x86

1 Introduction

The Fujitsu Server BS2000 SE series with its innovative HW and SW features forms the proven mainframe line

from Fujitsu. Designed as hybrid systems, the SE servers create a new quality of openness and integration

capability of different server and peripheral systems with simultaneous comprehensive and cross-system

manageability.

Under the umbrella of the SE infrastructure, multiple application scenarios are possible in various combinations for

both mainframe applications and applications of the open world. The server architecture offers comprehensive

performance scalability (scale-up and scale-out), and ensures that users can manage their application workloads

securely, quickly and efficiently across technological boundaries with maximum availability.

One major aim of the SE servers is to provide a uniform management strategy which offers customers significant

added value through maximum integration, and guarantees extremely cost-effective operation of their IT.

The heart of the SE series is formed by the /390-based Server Units, the x86-based Server Units, the Net Unit (NU)

and the Management Unit (MU).

All components are integrated into a standard 19" rack and are supplied to customers ready to use.

In addition to their high system performance, the servers of the SE series offer enhanced configuration options,

maximum availability and, not least of all, significantly reduced power consumption compared with predecessors.

Depending on requirements, the SE server contains all the system components needed for operation as an overall

application:

Server Unit /390 for BS2000 guest systems

Server Unit x86 for BS2000 guest systems

Application Units x86 for operating Native or hypervisor systems (e.g. Linux, Windows, VMware, etc.)

Net Unit as a high-speed, server-internal infrastructure to connect the components with each other and with the

customer's IP networks.

Shareable tape and disk periphery

Infrastructure to connect the components with the customer's FC networks

Information on using the manual

The Operating Manual consists of a number of modules and describes the features and hardware components of

the Fujitsu Server BS2000 SE series. Users should read the operating manuals carefully in order to obtain optimal

performance from the SE server.

This manual describes the hardware component Server Unit x86 and complements the Basic Operating Manual [ ].

You will find a comprehensive introductory chapter in the Basic Operating Manual. The chapters "Important notes"

on SE server operation and "Environmental protection and service" are contained only in the Basic Operating

Manual.

In the following, abbreviations are used to describe the SE server models and their components. These are

explained in the introduction to the Basic Operating Manual [ ] in the section "Models, Names, Abbreviations".

2 Server Unit SU x86

This section describes the Server Units SU310 in an SE server SE310, SU320 in an SE server SE320 and SU330

in an SE server SE330. SU330 can optionally also be present in an SE730.

In the SU x86 the base system X2000 enables BS2000 to execute (in Native mode or on BS2000 VMs).

An SU310 occupies two height units (HUs) in the rack, an SU320 as well as an SU330 occupies three HUs.

Features

For SU310 there are three models with four processors (16 cores) each, for SU320 one model with also four

processors. Capacity on Demand permits temporary processor attachment. For SU330 11 models are available

with up to 16 BS2000 processors.

The size of the main memory (for BS2000 and for the base system X2000) is 128 GB in the basic configuration.

These models can be enhanced to up to 512 GB.

For the input/output system the Server Unit contains two 2.5'' SAS hard disks with a capacity of 600 GB each (on

SU310 and SU320) resp. two SATA hard disks with a capacity of 960 GB each (on SU330) in the basic

configuration, which are mirrored.

The Server Unit contains a DVD-RW drive.

Fibre Channels operating at 8 or 16 Gbps are available for connecting peripherals.

At least one 4-port LAN card is connected on the Server Unit. The first two ports are used for the connection to

the Net Unit, and the other two can, if required, be used for BS2000 applications. Optionally LAN controllers

operating at 10 Gbps can also be used.

Each SU x86 is equipped with two power supply units.

Components and ports which are not used are not described below.

2.1 Switching the Server Unit on/off

Information on switching on and starting the SE server and on switching it off and shutting it down is provided in the

"Basic Operating Manual" [ ], section "Switching the server on and off".

Switching the Server Unit on

Before the Server Unit is switched on, the power status indicator lights up green (item 5 in ) resp. on SU320

figure 2

and SU330 the status indicator (item 1 in ) lights up white.figure 4

>As administrator, BS2000 administrator or authorized BS2000 operator, switch on the Server Unit using the

SE Manager (menu , tab, icon for the Server Unit), see the “Operation andHardware -> Units Units Power on

Administration” manual [ ].

The On/Off switch / status indicator lights up green (item 4 in resp. item 1 in ). The Server Unitfigure 2 figure 4

switches on, conducts a system test and starts X2000.

If automatic IPL is configured for BS2000, the BS2000 system (Native or as a VM2000 monitor system) is also

started with the configured settings.

Switching the Server Unit off

Before the Server Unit is switched off, the On/Off switch / status indicator lights up green, and after the Server Unit

has been switched off it no longer lights up resp. on SU320 and SU330 lights up white (item 4 in resp. item

figure 2

1 in ).figure 4

>As administrator, BS2000 administrator or authorized BS2000 operator, switch off the Server Unit using the

SE Manager (menu -> , tab, icon for the Server Unit), see the “Operation andHardware Units Units Power off

Administration” manual [ ].5

When the Server Unit is switched off, the BS2000 system is shut down properly taking into account the remaining

runtime specified.

The power status indicator (item 5 in , only on SU310) lights up green when the server is switched off but

figure 2

connected to the power supply (power cable connected).

This status indicator does not light up in the following situations:

The Server Unit is switched off and not connected to the power source.

The Server Unit is switched on and operating normally.

On SU320 and SU330 the power status indicator is integrated into the On/Off switch / status indicator. The On/Off

switch / status indicator lights up white when the Server Unit is switched off, but connected to the power supply

(power cable connected).

The On/Off switch / status indicator does not light up when the SU320 is switched off and not connected to the

power supply. It lights up green when the Server Unit is switched on and is in normal operation mode.

2.2 Front of the Server Unit

Figure 1: Server Unit SU310 (front)

No. Meaning

1 ID card (green)

3 Optical drive activity indicator

4 Operating panel (for further details see figure 2)

5 Video port (for Customer Support only)

6 USB ports (2x, for Customer Support only)

7 HDD indicators

Figure 2: SU310 front - Detailed view: Operating panel

No. Meaning

1 ID button/ ID indicator

2 Reset button

3 NMI button

4 On/Off button / Status indicator

5 Status indicator (power cable connected)

6 2x USB ports (for Customer Support only)

7 Video port (for Customer Support only)

8 HDD activity indicator

9 Global error indicator

10 CSS indicator

Figure 3: Server Unit SU320/SU330 (front)

No. Meaning

1 ID card

2 Optical disk drive (optional)

3 Video port (for Customer Support only)

4 Operating panel (for further details see figure 4)

5 2.5-inch HDDs/SSDs/PCIe-SSDs (8x, 16x or 24x)

Figure 4: SU320/SU330 front - Detailed view: Operating panel

No. Meaning

1 On/off switch / status indicator

2 ID button

3 RESET button

4 NMI button

5 2x USB 3.0 port

6 HDD activity indicator

7 Global error indicator

8 CSS indicator

ID card

You can pull the ID card (see ) out and push it in again as far as it will go.

figure 1/3

The ID card contains various system information, e.g. product name, serial number, MAC addresses and DNS

name.

Andere Handbücher für BS2000 SE Series

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu FUTRO S700 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX2540 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX200 S2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX1330 M4 Bedienungs- und Montageanleitung

Fujitsu

Fujitsu PRIMERGY TX200 S6 Betriebsanleitung

Fujitsu

Fujitsu Primepower200 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX1330 M1 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T2000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX200 S2 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5120 Installations- und Betriebsanleitung

Fujitsu

Fujitsu Primergy BX620 S2 Kurzanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX140 S2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY CX270 S1 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX100 S4 Betriebsanleitung

Fujitsu

Fujitsu SPARC Enterprise M3000 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX600 S3 Montageanleitung

Fujitsu

Fujitsu Primergy TX300 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX960 S1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S6 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M5000 Installationsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung