Fujitsu PRIMERGY TX1310 M5 Bedienungsanleitung

FUJITSU Server PRIMERGY TX1310 M5

Upgrade and Maintenance Manual

Upgrade and Maintenance Manual - English

03/2022

Comments… Suggestions… Corrections…

The User Documentation Department would like to know your opinion of this manual. Your

feedback helps us optimize our documentation to suit your individual needs.

Feel free to send us your comments by e-mail to [email protected].

Documentation creation according to ISO 9001 and ISO 27001

To ensure high quality and information security standards while creating documentation, the

quality management system and information security management system of cognitas are

certified in compliance with ISO 9001 and ISO 27001.

cognitas. Gesellschaft für Technik-Dokumentation mbH www.cognitas.de/en/

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

–The contents of this manual may be revised without prior notice.

–Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

–No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper-V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure that

these safety notes are understood before using the product. Keep this manual

and the "Safety Notes and Regulations" manual in a safe place for easy

reference while using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures.

VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the printed circuit board

assemblies of the product and in the mouse and keyboard are limited-life

components. Use of these components beyond their operating life may result

in electrolyte leakage or depletion, potentially causing emission of foul odor or

smoke.

As a guideline, in a normal office environment (25 °C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

TX1310 M5 Upgrade and Maintenance Manual

The product is not suitable for use at visual display workplaces according to §2

of the Workplace Regulations (applies to all server systems except TX server

systems).

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, the use of an

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Upgrade and Maintenance Manual TX1310 M5

Only for Japan: About SATA HDDs

The SATA version of this server supports HDDs with SATA/BC-SATA storage

interfaces. Please note that the usage and operation conditions differ

depending on the type of HDD used.

For more information on the usage and operation conditions of each available

type of HDD, see the following internet address:

https://jp.fujitsu.com/platform/server/primergy/harddisk/

Only for Japan:

Shielded LAN cables should be used in this product.

UK Importer information

Fujitsu Services Limited

22 Baker Street, London, W1U 3BW, United Kingdom

TX1310 M5 Upgrade and Maintenance Manual

Version history

Issue

number

Issue date Description

V 1.0 11/2021 Initial release

03/2022 cable plan updated

Upgrade and Maintenance Manual TX1310 M5

Content

1 Introduction 15

1.1 Concept and target groups of this manual 15

1.2 Notational conventions 15

2 Before you start 17

2.1 Basic information 17

2.1.1 Proceeding 17

2.1.2 Advanced Thermal Design (ATD) 17

2.1.3 Installing optional components 18

2.2 Classification of procedures 18

2.2.1 Assignment of unit categories 18

2.2.2 Customer Replaceable Units (CRU) 19

2.2.3 Upgrade and Repair Units (URU) 19

2.2.4 Field Replaceable Units (FRU) 20

2.3 Average task duration 21

2.4 Tools you need at hand 22

2.5 Documentation overview 22

2.5.1 About availability of manuals 22

2.5.2 List of documents 23

3 Important information 25

3.1 Introduction 25

3.2 Safety instructions 25

3.2.1 Basic safety instructions 25

3.2.2 Before starting up 26

3.2.3 Installation and operation 26

TX1310 M5 Upgrade and Maintenance Manual

3.2.4 Batteries 29

3.2.5 Working with optical disk drives (ODDs) and media 29

3.2.6 Laser information 31

3.2.7 Modules with Electrostatic-Sensitive Devices (ESD modules) 31

3.2.8 Transporting the server 33

3.2.9 Installing the server in the rack 34

3.2.10 Other important information 34

3.3 CE conformity 35

3.4 FCC Class A Compliance Statement 35

3.5 Environmental protection 36

4 Basic hardware procedures 39

4.1 Using diagnostic information 39

4.1.1 Proceeding 39

4.2 Unlocking the server 39

4.3 Removing the bay cover 40

4.4 Shutting down the server 41

4.5 Disconnecting the power cord 42

4.6 Getting access to the component 43

4.6.1 Safety notes 43

4.6.2 Removing the side cover 44

4.6.3 Removing the front cover 44

4.6.4 Removing the top HDD cage 46

4.6.5 Removing the system board tray 48

4.7 Reassembling 50

4.7.1 Safety notes 50

4.7.2 Inserting in the system board tray 50

4.7.3 Installing the top HDD cage 52

4.7.4 Installing the front cover 54

4.7.5 Installing the side cover 56

Content

Upgrade and Maintenance Manual TX1310 M5

4.8 Connecting the power cord 56

4.9 Switching on the server 57

4.10 Installing the bay cover 58

4.11 Locking the server 59

5 Basic software procedures 61

5.1 Starting the maintenance task 61

5.1.1 Suspending BitLocker functionality 61

5.1.2 Removing backup and optical disk media 63

5.1.3 Verifying and configuring the backup software solution 63

5.2 Completing the maintenance task 63

5.2.1 Updating or recovering the BIOS 63

5.2.2 Reconfiguring the backup software solution 64

5.2.3 Enabling replaced components in the BIOS 65

5.2.4 Verifying the system time settings 65

5.2.5 Viewing the System Event Log (SEL) 66

5.2.6 Updating the NIC configuration file in a Linux/VMware OS 67

5.2.7 Resuming BitLocker functionality 68

5.2.8 Performing a RAID array rebuild 69

5.2.9 Looking up for MAC/WWN addresses 70

5.2.10 Using the Chassis ID Prom Tool 71

5.2.11 Configuring LAN teaming 71

6 Power supply unit (PSU) 73

6.1 Safety notes 73

6.2 Basic information 73

6.3 Replacing the standard PSU 73

Content

TX1310 M5 Upgrade and Maintenance Manual

7 Hard disk drives (HDD) 81

7.1 Safety notes 81

7.2 Basic information 82

7.3 2.5-inch HDD/SSD configurations 83

7.3.1 Installing a 2.5-inch HDD module 83

7.3.2 Removing a 2.5-inch HDD module 86

7.3.3 Replacing a 2.5-inch HDD module 88

7.4 3.5-inch HDD configurations 89

7.4.1 Installing a 3.5-inch HDD module 89

7.4.2 Removing a 3.5-inch HDD module 92

7.4.3 Replacing a 3.5-inch HDD module 95

8 Fans 97

8.1 Safety notes 97

8.2 Basic information 97

8.3 Replacing the rear fan 98

8.4 Replacing the front fan 105

9 Expansion cards 111

9.1 Safety notes 111

9.2 Basic information 112

9.3 Handling slot brackets 113

9.3.1 Installing slot brackets 113

9.3.2 Removing slot brackets 116

9.4 Installing an expansion card 116

9.5 Removing an expansion card 119

Content

Upgrade and Maintenance Manual TX1310 M5

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu Primergy RX300 S2 Leitfaden

Fujitsu

Fujitsu Primergy RX4770 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX800 S2 Bedienungsanleitung

Fujitsu

Fujitsu SPARC ENTERPRISE T5220 Bedienungsanleitung

Fujitsu

Fujitsu SPARC M12-1 Bedienungsanleitung

Fujitsu

Fujitsu SPARC EnterpriseM3000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Service-Handbuch

Fujitsu

Fujitsu FUTRO S900 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S8 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2540 M6 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY Econel 50 Betriebsanleitung

Fujitsu

Fujitsu FUTRO A300 Bedienungsanleitung

Fujitsu

Fujitsu SE310 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX100 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX140 S1p Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX600 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY GX2560 M7 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX300 S3 Bedienungsanleitung

Fujitsu

Fujitsu Primergy BX2560 M1 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M4000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY CX2560 M4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2560 M2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S6 Betriebsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung