Fujitsu AIRSTAGE UTY-ASGXZ1 Bedienungsanleitung

PART NO. 9708313030

SERVICE TOOL for

VRF System

UTY-ASGXZ1 Ver. 2.0

OPERATING MANUAL

CAUTION

Please read the LICENSE AGREEMENT in the manual rst.

LICENSE AGREEMENT

for

“SERVICE TOOL for VRF SYSTEM”

IMPORTANT-READ CAREFULLY

This “SERVICE TOOL for VRF SYSTEM” License Agreement (LICENSE AGREEMENT) is a legal agreement between

you and Fujitsu General Limited (FGL) for the use of VRF SERVICE TOOL products designated below, which includes

computer software and printed materials, and may include online or electronic documentation (SOFTWARE PRODUCT

or SOFTWARE). By installing, copying, or otherwise using the SOFTWARE PRODUCT, you accept to be bound by

all of the terms and conditions of this LICENSE AGREEMENT. If you do not agree to all of the terms and conditions of

this LICENSE AGREEMENT, you may not use the SOFTWARE PRODUCT and shall promptly return the SOFTWARE

PRODUCT to the place from which you have obtained it.

SOFTWARE PRODUCT LICENSE1.

The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as well as by other

intellectual property laws and treaties. The SOFTWARE PRODUCT is licensed to you, not sold. FGL owns the title,

GRANT OF LICENSE2.

FGL hereby grants you the limited, non-exclusive and non-transferable rights only for the purpose of maintaining and

testing VRF air-conditioning system products (VRF) provided you comply with all terms and conditions of this LICENSE

AGREEMENT.

COPYRIGHT3.

All right, title, and copyright in and to the SOFTWARE PRODUCT, and any copies of the SOFTWARE PRODUCT are

owned by FGL. The SOFTWARE PRODUCT is protected by copyright laws and international treaty provisions. There-

fore, you may copy the SOFTWARE PRODUCT solely for backup or archival purposes.

DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS4.

USE OF SOFTWARE PRODUCT(1)

You may install and use the enclosed SOFTWARE PRODUCT on a single terminal connected to a single computer.

You may not network the SOFTWARE or otherwise use it on more than one computer terminal at the same time.

The infrastructure necessary to use this software (PC, accessories, etc.), shall be prepared separately by you.

LIMITATIONS ON REVERSE ENGINEERING, DECOMPILATION, AND DISASSEMBLY(2)

You may not reverse engineer, decompile, or disassemble the SOFTWARE PRODUCT, except and only to the

extent that applicable law expressly permits such activity notwithstanding this limitation.

RENTAL(3)

You may not rent or lease the SOFTWARE PRODUCT.

SOFTWARE TRANSFER(4)

You may not transfer the SOFTWARE PRODUCT to any person and/or entity (-ies) either payable or free of charge

without the written consent of FGL.

TERMINATION(5)

Without prejudice to any other rights, FGL may terminate this LICENSE AGREEMENT if you fail to comply with the

terms and conditions of this LICENSE AGREEMENT. In such an event, you shall promptly return all originals and

copies of the SOFTWARE PRODUCT to FGL.

EXPORT RESTRICTIONS5.

You acknowledge that the SOFTWARE PRODUCT is of Japan origin. You agree that neither you nor your customers

intend to or will, directly or indirectly, export or transmit the SOFTWARE PRODUCT to any country to which such export

or transmission is restricted by any applicable regulation or statute, without the prior written consent, if required, of the

authorized governmental entity as may have jurisdiction over such export or transmission.

NO WARRANTY6.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, FGL EXPRESSLY DISCLAIMS ANY WARRANTY

FOR THE SOFTWARE PRODUCT. THE SOFTWARE PRODUCT AND ANY RELATED DOCUMENTATION IS

PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,

WITHOUT LIMITATION, THE IMPLIED WARRANTIES OR MERCHANTABILITY OF FITNESS FOR A PARTICULAR

PURPOSE. THE ENTIRE RISK ARISING OUT OF USE OR PERFORMANCE OF THE SOFTWARE PRODUCT RE-

MAINS WITH YOU.

LIMITATION OF LIABILITY AND CUSTOMER REMEDIES7.

FGL’S ENTIRE LIABILITY AND YOUR EXCLUSIVE REMEDY UNDER THIS LICENSE AGREEMENT SHALL BE, AT

FGL’S OPTION, REPLACEMENT OF THE SOFTWARE WHICH IS RETURNED TO FGL. THIS LICENSE AGREEMENT

SHALL ALSO APPLY TO THE REPLACEMENT SOFTWARE SUPPLIED UNDER THIS SECTION 7.

NO LIABILITY FOR CONSEQUENTIAL DAMAGES8.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL FGL BE LIABLE FOR ANY

DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFIT,

BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) DIRECT

OR INDIRECT, TO YOU OR TO ANY THIRD PARTY, ARISING OUT OF THE USE OR INABILITY TO USE THIS

PRODUCT, EVEN IF FGL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

ENTIRE AGREEMENT9.

This LICENSE AGREEMENT (including any addendum or amendment to this LICENSE AGREEMENT included with

the SOFTWARE PRODUCT) is the entire agreement between you and FGL relating to the SOFTWARE PRODUCT and

supersedes all prior contemporaneous oral or written communications, proposals and representations with respect to

the SOFTWARE PRODUCT or any other subject covered by this LICENSE AGREEMENT.

INDEMNITY10.

You agree to indemnify and hold FGL, and its subsidiaries, afliates, ofcers, agents, co-branders or other partners, and

employees, harmless from any damage, claim or demand, including without limitation reasonable attorneys’ fees, made

by any third party due to or arising out of your violation of the terms and conditions of this LICENSE AGREEMENT, or

your violation of any rights of another person or entity.

GOVERNING LAW AND JURISDICTION11.

To the maximum extent permitted by applicable law, this LICENSE AGREEMENT is governed by the laws of JAPAN. To

the maximum extent permitted by applicable law, you and FGL hereby irrevocably submit to the exclusive jurisdiction of

the Tokyo District Court and other higher courts having jurisdiction in Japan for the settlement of disputes arising under

or in connection with this LICENSE AGREEMENT.

1. Safety precautions

Contents

1. Safety precautions 7

1-1 Safety precautions7

1-2 Precautions when using the Service Tool8

2. Outline 9

  11

3-1 Screen transition11

12

3-2-1 User Registration (at initial starting) ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 12

3-2-2 Login ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 13

3-2-3 Online Site Data Selection ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 14

3-2-4 Name Master Database le selection screen ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 15

3-2-5 Scanning Setting ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 18

3-2-6 Mismatched Unit List ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 22

3-2-7 Address Checker ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 23

26

3-3-1 Import le selection ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 26

4. Data acquisition application right click menu  27

4-1 Outline27

4-1-1 Menu ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 27

4-1-2 Screen transition (online) ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 29

4-1-3 Screen transition (ofine) ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 30

4-2 Re-Scanning31

4-3 Maintenance31

4-3-1 Network Topology Analyzer ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 31

4-3-2 Remote Setting ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 34

4-3-3 System Time Setting ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 36

4-3-4 Manual Setting ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 37

4-3-5 Model Name Writer ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 39

1. Safety precautions

4-3-6 Central Control Forced Release ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 40

4-3-7 Error Memory Reader ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 41

4-3-8 Time Guard Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 43

4-4 Environment Setting44

4-4-1 Display ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 44

4-4-2 Remote Operation ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 46

4-5 Model Data Import48

4-6 User Setting49

4-6-1 Register User ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 50

4-6-2 Change Password ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 51

4-6-3 Change User ID ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 52

4-6-4 Delete User ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 53

54

4-8 Version57

4-9 Exit60

5. Monitor Application 62

5-1 Screen transition62

5-2 Main menu64

5-3 System List65

5-3-1 Name and function of each area ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 65

5-3-2 System List display ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 68

5-4 Detail Diagram69

5-4-1 Name and function of each area ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 69

5-4-2 Detail Diagram specication ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 77

5-5 Detail Status List81

5-5-1 Name and function of each area ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 82

5-5-2 Detail Status List specication ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 84

5-6 Detail Check List86

5-6-1 Name and function of each area ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 87

1. Safety precautions

5-6-2 Detail Check List specication ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 88

5-6-3 Commissioning Report creation ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 90

5-7 Operation History93

5-7-1 Name and function of each area ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 93

5-7-2 Operation History specication ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 96

5-8 Error History98

5-8-1 Name and function of each area ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 98

5-8-2 Error History display method ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 99

5-8-3 Unit Memory ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 102

5-9 Graph104

5-9-1 Name and function of each area ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 105

5-9-2 Graph specication ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 107

5-10 Error List109

5-11 Data Backup110

5-11-1 Name and function of each area ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 111

5-11-2 Procedures for creating backup les ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 112

5-11-3 Data le download/deletion ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 113

5-12 Operation Setting115

5-13 Setting117

5-13-1 Data Recording Setting ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 117

5-13-2 Room Temperature Display Selection ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 119

5-13-3 VRF Sensor Mark List ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 120

5-13-4 Troubleshooting ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 120

5-14 WIBU KEY error122

5-15 Scanning other units 123

6. Remote Operation 124

6-1 Enabling the Remote Operation

(Service Tool operation)124

126

1. Safety precautions

6-2-1 Connection Key issuance (Service Tool operation) ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 126

6-2-2 Account registration (PC operation at remote side) ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 127

6-3 Login and Remote Operation start

(PC operation at remote side)130

6-4 Remote Operation end and Logout

(PC operation at remote side)133

6-5 Disabling the Remote Operation

(Service Tool operation)134

6-6 Remote Operation135

7. Troubleshooting 137

1. Safety precautions

Safety precautions1.

Safety precautions1-1

Before using Service Tool, read this “Safety precautions” thoroughly to ensure the correct•

operation.

This section describes the important safety information to operate Service Tool.•

The meanings of “WARNING” and “CAUTION” are explained as follows.•

WARNING

This mark indicates the procedures, which might result in the

death of or serious injury to the user or service personnel if im-

properly performed.

CAUTION This mark indicates the procedures, which might result in personal

harm to the user or damage to property if improperly performed.

This manual is for service personnel authorized to use the Service Tool. Always keep

this manual in an easily accessible place for use by authorized service personnel.

WARNING

When using U10 USB Network Interface, follow the instructions given in the manual1.

that comes with the product.

CAUTION

Service Tool can control the air-conditioner system on a personal computer. Be careful not

to turn off the power supply of the personal computer, or not to nish the application com-

pulsorily during operation. Otherwise, Service Tool might malfunction. For personal com-

puter used as Service Tool, refer to the setting manual.

1. Safety precautions

Precautions when using the Service Tool1-2

Please read and fully understand the Operating Manual. Fujitsu General Limited is not1.

responsible for improper use.

Fujitsu General Limited is not responsible if the settings in this software or data used for2.

the controlling are deleted. We request that the customer take responsibility for the admin-

istration of the settings and control data.

If the personal computer operating this software stops, immediately restart the computer3.

and restart this software. Also, if the unit equipment stops due to a power supply interrup-

tion, restart this software immediately as there is the potential for malfunctioning.

The WIBU-KEY and WHITE-USB-KEY (Software protection key and installation key) will4.

not be reissued. Be careful not to lose them.

For information about operating your personal computer, refer to the operating manual for5.

the PC and the store that sold it.

Never start this software simultaneously with other software as this may cause malfunc-6.

tioning.

When Service Tool program is running, do not set/adjust the time and date of the PC to7.

prevent data becoming inconsistent.

When program executional environment of Windows is corrupted or abnormal, or other8.

softwares that interfere with the operation of Service Tool is installed or running, Service

Tool may not install or run properly. It is usually extremely difcult to detect such condi-

tions, if it occurs.

Service Tool product is provided with softwares, drivers, components listed below.9.

If the same kind of softwares, drivers, components with different version is installed on the10.

same PC, Service Tool may not install or run properly.

1) Microsoft®.NET Framework

2) Microsoft®SQL Server®2014 Express

Before use, set the resolution so that the resolution of PC monitor screen at remote op-11.

eration side is higher than that of local side. Otherwise, the browser outer frame area in

the screen is not displayed because monitor screen is displayed using browser at remote

operation side.

Inhaltsverzeichnis

Andere Fujitsu Lagerung Handbücher

Fujitsu

Fujitsu MHT2080BH Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX500 S4 Bedienungsanleitung

Fujitsu

Fujitsu RE25U300J Bedienungsanleitung

Fujitsu

Fujitsu MHV2040AT - Hard Drive - 40 GB Bedienungsanleitung

Fujitsu

Fujitsu Eternus DX80 S2 Installationsanleitung

Fujitsu

Fujitsu MAX3073NC SCSI,80, DC961,Hard Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX80 Bedienungsanleitung

Fujitsu

Fujitsu PG-HDH61D Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS LT270 S2 Bedienungsanleitung

Fujitsu

Fujitsu Eternus CS800 S2 Bedienungsanleitung

Fujitsu

Fujitsu MPD3XXXAH Bedienungsanleitung

Fujitsu

Fujitsu MBA3073RC SERIES Bedienungsanleitung

Fujitsu

Fujitsu MPG3XXXAH Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX200 S3 Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX Disk Bedienungsanleitung

Fujitsu

Fujitsu MAT3300NC Bedienungsanleitung

Fujitsu

Fujitsu MAY2036RC Product/ Bedienungsanleitung

Fujitsu

Fujitsu MAN3367FC - Enterprise 36.7 GB Hard Drive Bedienungsanleitung

Fujitsu

Fujitsu DynaMO 1300 Bedienungsanleitung

Fujitsu

Fujitsu MHV2080BS Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX S5 Series Installationsanleitung

Fujitsu

Fujitsu MAX3147 NC SERIES Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX8100 S4 Technisches Handbuch

Fujitsu

Fujitsu ETERNUS DX60 S4 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung

HP P9000 Bedienungsanleitung