Fujitsu ETERNUS DX S4 Series Bedienungsanleitung

FUJITSU Storage

ETERNUS DX, ETERNUS AF

Configuration Guide -Server Connection-

(Fibre Channel) ETERNUS DX S4/S3 series Hybrid Storage Systems,

ETERNUS AF series, ETERNUS DX200F All-Flash Arrays Settings

P3AM-7962-15ENZ0

This page is intentionally left blank.

Preface

This manual briefly explains the operations that need to be performed by the user in order to connect an

ETERNUS DX/AF to a server running Solaris OS, HP-UX, AIX, Windows®, Linux, VMware ESX, PAN Manager, Cit-

rix® XenServer®, Oracle Linux, or Oracle VM Server for x86 via a Fibre Channel interface.

This manual should be used in conjunction with any other applicable user manuals, such as those for the

ETERNUS DX/AF, server, OS, Fibre Channel cards, and drivers.

Refer to "Configuration Guide -Server Connection- Notations" for the notations used in this manual such as

product trademarks and product names. For storage systems that are supported by the OS, refer to the Server

Support Matrix of the ETERNUS DX/AF.

15th Edition

December 2017

The Contents and Structure of this Manual

This manual is composed of the following two chapters.

•"Chapter 1 Workflow" (page 6)

This chapter describes the workflow when setting up a storage system.

•"Chapter 2 Setting Up the ETERNUS DX/AF" (page 8)

This chapter describes how to set up a storage system.

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-

P3AM-7962-15ENZ0

Table of Contents

Chapter 1 Workflow 6

Chapter 2 Setting Up the ETERNUS DX/AF 8

2.1 Common Settings ........................................................................................................................... 8

2.1.1 Setting the To-Server Connection Type (Setting the FC Port Parameters)..............................................................8

2.1.2 Creating the Server Accessible LUN Groups (Setting the LUN Groups)...................................................................9

2.1.3 Setting the Host Responses ................................................................................................................................10

2.1.4 Setting the CA Port Groups..................................................................................................................................12

2.1.5 Registering the WWNs of the Accessing Fibre Channel Cards (Setting FC Host)...................................................12

2.1.6 Allocating LUN Groups (Setting the Host Affinity)...............................................................................................12

2.2 Specific Settings ........................................................................................................................... 13

2.2.1 Setting the CA Reset Groups................................................................................................................................13

2.2.2 Setting the Subsystem Parameters .....................................................................................................................14

2.3 Checking the WWNs ..................................................................................................................... 14

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-

P3AM-7962-15ENZ0

List of Tables

Table 2.1 Combinations of the transfer rates and the connection types (when using direct connections to Fibre

Channel cards) ...........................................................................................................................................8

Table 2.2 Combinations of the transfer rates and the connection types (when connecting to Fibre Channel

switches)....................................................................................................................................................8

Table 2.3 FC port parameter settings (when the connection type is FC-AL) ...............................................................9

Table 2.4 FC port parameter settings (when the connection type is Fabric)...............................................................9

Table 2.5 Host response settings .............................................................................................................................10

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-

P3AM-7962-15ENZ0

Chapter 1

Workflow

This manual is used when performing the setup procedures described in the "Setting Up the ETERNUS DX/AF"

section of the "Configuration Guide -Server Connection- (Fibre Channel)" for each OS.

Required Documents

•"Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel Switch Settings"

•"Fabric OS Administrator's Guide Supporting Fabric OS"

•"Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris"

•"ETERNUS Web GUI User's Guide"

Workflow

Setting the FC Port Parameters

Set the to-server connection type.

•"2.1.1 Setting the To-Server Connection Type (Setting the FC Port Parameters)" (page 8)

Setting the LUN Groups

Set the server accessible LUN groups.

•"2.1.2 Creating the Server Accessible LUN Groups (Setting the LUN Groups)" (page 9)

Setting the Host Responses

Set the host responses to match the connection configuration.

•"2.1.3 Setting the Host Responses" (page 10)

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-

P3AM-7962-15ENZ0

Setting the CA Port Groups

Create a group of ports for each CA type.

•"2.1.4 Setting the CA Port Groups" (page 12)

Setting the FC Host

•"2.1.5 Registering the WWNs of the Accessing Fibre Channel Cards (Setting FC Host)" (page 12)

Setting the Host Affinity

Define the relationship between the FC host, the CA port group, and the LUN group.

•"2.1.6 Allocating LUN Groups (Setting the Host Affinity)" (page 12)

Setting the Specific Parameters

Set the required parameters according to the OS and the connection configuration.

•"2.2 Specific Settings" (page 13)

Checking the WWNs

Check information that is necessary for connecting to the server.

•"2.3 Checking the WWNs" (page 14)

After completing all the required procedures in this manual, follow the procedures in "Configuration

Guide -Server Connection- (Fibre Channel)" for each OS.

Chapter 1 Workflow

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-

P3AM-7962-15ENZ0

Chapter 2

Setting Up the ETERNUS DX/AF

2.1 Common Settings

This section explains the settings required for all server OSs, regardless of the connection configuration.

See the "ETERNUS Web GUI User's Guide" for details of how to set up and operate ETERNUS Web GUI.

2.1.1 Setting the To-Server Connection Type (Setting the FC Port Parameters)

Select a combination of the transfer rate and connection type from the following table according to the con-

nection environment.

Table 2.1 Combinations of the transfer rates and the connection types (when using direct connections to Fibre

Channel cards)

Fibre Channel

card maximum

speed

Transfer rate and connection type setting values

32Gbit/s CA 16Gbit/s CA 8Gbit/s CA

Transfer rate Connection Transfer rate Connection Transfer rate Connection

32Gbit/s 32Gbit/s Fabric 16Gbit/s Fabric 8Gbit/s FC-AL

16Gbit/s 16Gbit/s (*1) Fabric 16Gbit/s (*1) Fabric 8Gbit/s FC-AL

8Gbit/s 8Gbit/s FC-AL 8Gbit/s FC-AL 8Gbit/s FC-AL

4Gbit/s — — 4Gbit/s FC-AL 4Gbit/s FC-AL

*1: Specify "Auto Negotiation" for direct connections to 16Gbit/s Brocade Fibre Channel cards.

Table 2.2 Combinations of the transfer rates and the connection types (when connecting to Fibre Channel

switches)

Fibre Channel

switch maxi-

mum speed

Transfer rate and connection type setting values

32Gbit/s CA 16Gbit/s CA 8Gbit/s CA

Transfer rate Connection Transfer rate Connection Transfer rate Connection

32Gbit/s 32Gbit/s Fabric 16Gbit/s Fabric 8Gbit/s Fabric

16Gbit/s 16Gbit/s Fabric 16Gbit/s Fabric 8Gbit/s Fabric

8Gbit/s 8Gbit/s Fabric 8Gbit/s Fabric 8Gbit/s Fabric

4Gbit/s — — 4Gbit/s Fabric 4Gbit/s Fabric

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-

P3AM-7962-15ENZ0

For each connection configuration, set the indicated items only. All other parameters should be left on their

default values.

Table 2.3 FC port parameter settings (when the connection type is FC-AL)

Parameter Solaris OS

HP-UX, AIX, Windows®, Linux, VMware

ESX, PAN Manager, Citrix XenServer,

Oracle Linux, Oracle VM Server for x86

Connection FC-AL

Set Loop ID Manual

Loop ID Values from 0x10 upwards

(Except 0x7D)

0x00

Transfer Rate Transfer rate that is selected in Table 2.1.

Frame Size 2048

Reset Scope I_T_L

Release Reservation if Chip is Reset Disable

Table 2.4 FC port parameter settings (when the connection type is Fabric)

Parameter Setting value

Connection Fabric

Transfer Rate Transfer rate that is selected in Table 2.1 or Table 2.2.

Frame Size 2048

Reset Scope I_T_L

Release Reservation if Chip is Reset Disable

Make sure to prepare and set up Fibre Channel switches for Fibre Channel connections. For setting details,

refer to "Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel Switch Settings" or "Fabric

OS Administrator's Guide Supporting Fabric OS".

2.1.2 Creating the Server Accessible LUN Groups (Setting the LUN Groups)

Create LUN groups for the server to access. Refer to "Connectivity Management" in "ETERNUS Web GUI User's

Guide" for details, and set the LUN groups.

Depending on the OS version, the server may not recognize the ETERNUS DX/AF unless a LUN group is as-

signed from LUN0. In this case, assign a LUN group starting from LUN0 in ascending order.

Chapter 2 Setting Up the ETERNUS DX/AF

2.1 Common Settings

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-

P3AM-7962-15ENZ0

2.1.3 Setting the Host Responses

The host response parameters for the ETERNUS DX/AF must be set to match the way the server processes the

responses to requests from the ETERNUS DX/AF. Setting of the host response must be done before connecting

the ETERNUS DX/AF to the server.

Set the parameters that are described below for each OS.

Retain the default values for all of the parameters that are not described below.

When setting the access path using the ETERNUS SF Storage Cruiser, the host responses for FC host will be

set to default values. Set the host responses after setting the access path using the ETERNUS SF Storage

Cruiser.

Table 2.5 Host response settings

OS Conditions Host response selection

Solaris (*1) When using PRIMECLUSTER (regardless of the

multipath software type)

Default

When using the OS standard Multipath Driver

(MPxIO)

Solaris MPxIO

Other cases Default

Windows®

Linux

VMware ESX

Citrix XenServer

Oracle VM Server for x86

– Default

HP-UX – HP-UX

AIX When using Veritas InfoScale AIX VxVM

Other cases AIX

IBM SVC – SVC

*1: An Oracle-brand Fibre Channel card driver may be used for Fujitsu Fibre Channel cards.

To confirm which driver should be used, check the "Notes" and "Fibre Channel Cards that Require an Ora-

cle-brand Driver" sections in "Configuration Guide -Server Connection- (Fibre Channel) for Oracle So-

laris".

Chapter 2 Setting Up the ETERNUS DX/AF

2.1 Common Settings

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-

P3AM-7962-15ENZ0

Andere Handbücher für ETERNUS DX S4 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fujitsu Lagerung Handbücher

Fujitsu

Fujitsu MAN3184 SERIES Bedienungsanleitung

Fujitsu

Fujitsu MHV2080BS Bedienungsanleitung

Fujitsu

Fujitsu MAN3184MC - Enterprise 18.4 GB Hard Drive Bedienungsanleitung

Fujitsu

Fujitsu MPD3XXXAT Bedienungsanleitung

Fujitsu

Fujitsu MHV2160BT - 160GB SATA/150 4200RPM 8MB Notebook Hard... Bedienungsanleitung

Fujitsu

Fujitsu MAS3184NC/NP Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS LT260 Bedienungsanleitung

Fujitsu

Fujitsu FD-1100MT Bedienungsanleitung

Fujitsu

Fujitsu M2488 Bedienungsanleitung

Fujitsu

Fujitsu MPA3017AT Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX60 S2 Bedienungsanleitung

Fujitsu

Fujitsu IRF-1S series Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX60 S2 Bedienungsanleitung

Fujitsu

Fujitsu MHT2060BH - Mobile 60 GB Hard Drive Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS LT40 S2 Anleitung zur Verwendung

Fujitsu

Fujitsu teamserver Series Bedienungsanleitung

Fujitsu

Fujitsu RE25U Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX60 Referenzhandbuch

Fujitsu

Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS... Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX60 S3 Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX8100 S3 Technisches Handbuch

Fujitsu

Fujitsu MAX3036RC SERIES Bedienungsanleitung

Fujitsu

Fujitsu DynaMO 1300U2 Pocket Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung

HP P9000 Bedienungsanleitung