Fujitsu ETERNUS DX100 S3 Bedienungsanleitung

FUJITSU Storage

ETERNUS DX

Configuration Guide (Web GUI)

P2X0-1250-06ENZ0

ETERNUS DX100 S3/DX200 S3,

ETERNUS DX500 S3/DX600 S3

Disk storage systems,

ETERNUS DX200F

All Flash Array

This page is intentionally left blank.

FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)

Preface

This manual provides a variety of operating procedures about Web GUI for the FUJITSU Storage ETERNUS

DX100 S3/DX200 S3 Disk storage system, the FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage sys-

tem, and the FUJITSU Storage ETERNUS DX200F All Flash Array (hereinafter referred to as "GUI"). It should be

referred to when setting up and configuring environment of the ETERNUS DX100 S3/DX200 S3 Disk storage

system, the ETERNUS DX500 S3/DX600 S3 Disk storage system, and the ETERNUS DX200F All Flash Array

(hereinafter referred to as "ETERNUS DX" or "storage system").

Knowledge of UNIX or Windows® system management is required.

Sixth Edition

September 2014

Structure of This Manual

This manual consists of the following seven chapters and three appendices.

●Chapter 1 Outline

This chapter provides an overview and explains the features, the operation environment, the user man-

agement function, and the screen operations for GUI.

●Chapter 2 Startup and Shutdown

This chapter describes how to start, exit, log in and log out from GUI.

●Chapter 3 Initial Setup

This chapter describes the initial settings for the ETERNUS DX storage systems.

●Chapter 4 Configuration Settings for RAID Groups or Thin Provisioning

This chapter describes the RAID group settings for Standard volumes and Snap Data volumes. This chapter

also describes the Thin Provisioning Pool settings for Thin Provisioning volumes.

●Chapter 5 Host Interface Management

This chapter describes the settings for host connection.

●Chapter 6 Settings for the Advanced Copy Environment

This chapter describes the settings for an operation environment that uses the Advanced Copy functions.

●Chapter 7 System Environment Settings

This chapter describes the key management settings that are used for encrypting authentication of Self

Encrypting Drives (SED).

Preface

FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)

The following items are provided in the appendices.

•Installing the Security Certificate

•Structures for Host Connection

•Estimated Advanced Copy Source Capacity

Latest Information

The information in this manual is subject to change without notice for functionality expansion and

improvement of the ETERNUS DX storage systems. The latest version of this manual and the latest information

of the ETERNUS DX storage systems are released in the following web-site. Access the following address if

needed.

http://www.fujitsu.com/global/services/computing/storage/eternus/documentation/

Related Manuals

Related manuals (*1) for this manual are listed below.

•FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Overview

•FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Site Planning Guide

•FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Design Guide (Basic)

•FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)

•FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Operation Guide (Basic)

•FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Overview

•FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide

•FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Design Guide (Basic)

•FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)

•FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic)

•FUJITSU Storage ETERNUS DX100 S3/DX200 S3, ETERNUS DX500 S3/DX600 S3 Disk storage system

Configuration Guide (NAS)

•FUJITSU Storage ETERNUS DX200F All Flash Array Overview

•FUJITSU Storage ETERNUS DX200F All Flash Array Site Planning Guide

•FUJITSU Storage ETERNUS DX200F All Flash Array Design Guide (Basic)

•FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)

•FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)

•FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

•ETERNUS Web GUI User's Guide (Operation) FUJITSU Storage ETERNUS DX100 S3/DX200 S3, ETERNUS DX500

S3/DX600 S3 Disk storage systems, ETERNUS DX200F All Flash Array

•ETERNUS Web GUI User's Guide (Settings) FUJITSU Storage ETERNUS DX100 S3/DX200 S3, ETERNUS DX500

S3/DX600 S3 Disk storage systems, ETERNUS DX200F All Flash Array

•ETERNUS CLI User's Guide FUJITSU Storage ETERNUS DX100 S3/DX200 S3, ETERNUS DX500 S3/DX600 S3 Disk

storage systems, ETERNUS DX200F All Flash Array

•FUJITSU Storage ETERNUS SF KM V2.5 Overview

•FUJITSU Storage ETERNUS SF KM V2.5 Scenarios

•FUJITSU Storage ETERNUS SF KM V2.5 Planning

Preface

FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)

•FUJITSU Storage ETERNUS SF KM V2.5 Administering

•FUJITSU Storage ETERNUS SF KM V2.5 Reference

•FUJITSU Storage ETERNUS SF KM V2.5 Glossary

•FUJITSU Storage ETERNUS SF KM V2.5 Installation and Configuration Guide

•FUJITSU Storage ETERNUS SF KM V2.5 Installation Guide (Windows)

•FUJITSU Storage ETERNUS SF KM V2.5 Installation Guide (Linux)

•FUJITSU Storage ETERNUS SF KM V2.5 Replication Environment Setup Guide (Windows)

•FUJITSU Storage ETERNUS SF KM V2.5 Replication Environment Setup Guide (Linux)

•FUJITSU Storage ETERNUS SF Storage Cruiser 16.1 Operation Guide

*1: Download the required manuals for your system environment.

The Structures and Contents of GUI Manuals

The GUI manual is composed of the following three manuals.

•FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)

•ETERNUS Web GUI User's Guide (Settings)

•ETERNUS Web GUI User's Guide (Operation)

The following table describes the contents of each manual.

Manual name Contents

FUJITSU Storage ETERNUS DX

Configuration Guide (Web GUI)

This manual describes the installation and the environmental settings for the

ETERNUS DX storage systems. For basic settings that are not described in this

manual, refer to "FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage sys-

tem Configuration Guide (Basic)", "FUJITSU Storage ETERNUS DX500 S3/DX600 S3

Disk storage system Configuration Guide (Basic)", or the "FUJITSU Storage ETER-

NUS DX200F All Flash Array Configuration Guide (Basic)".

ETERNUS Web GUI User's Guide

(Settings)

This manual describes the procedures, setup parameters, input conditions, and

the default values for GUI. Refer to this manual for functions and advanced set-

tings that are not described in "FUJITSU Storage ETERNUS DX Configuration Guide

(Web GUI)".

ETERNUS Web GUI User's Guide

(Operation)

This manual describes the monitoring information of the system status for the

ETERNUS DX storage systems. This manual also describes how to check the

results of the GUI configuration.

Preface

FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)

Acknowledgments

•Microsoft, Windows, Windows Server, and Internet Explorer are either registered trademarks or trademarks

of Microsoft Corporation in the United States and other countries.

•UNIX is a registered trademark of The Open Group in the United States and other countries.

•Java is a registered trademark of Oracle Corporation, its subsidiaries and affiliates in the United States and

other countries.

•IBM, AIX, and Tivoli are trademarks of International Business Machines Corporation, registered in many

jurisdictions worldwide.

•Red Hat is a registered trademark of Red Hat, Inc.

•Mozilla, Firefox, and the Mozilla and Firefox logos are trademarks or registered trademarks of the Mozilla

Foundation in the United States and other countries.

•Other company names, product names, and service names are registered trademarks or trademarks of

their respective owners.

Naming Conventions

Product names

The following products will be represented throughout this manual by the following abbreviations.

•The following abbreviations are used for Microsoft® Windows Server®.

Product name Abbreviation

Microsoft® Windows Server® 2003, Datacenter Edition

Windows Server 2003Microsoft® Windows Server® 2003, Enterprise Edition

Microsoft® Windows Server® 2003, Standard Edition

Microsoft® Windows Server® 2008 Datacenter

Windows Server 2008

Microsoft® Windows Server® 2008 Enterprise

Microsoft® Windows Server® 2008 Standard

Microsoft® Windows Server® 2008 for Itanium-Based Systems

Microsoft® Windows Server® 2008 HPC Edition

Microsoft® Windows Server® 2008 R2 Datacenter

Windows Server 2008 R2

Microsoft® Windows Server® 2008 R2 Enterprise

Microsoft® Windows Server® 2008 R2 Standard

Microsoft® Windows Server® 2008 R2 for Itanium-Based Systems

Microsoft® Windows Server® 2008 R2 HPC Edition

Microsoft® Windows Server® 2012 Datacenter

Windows Server 2012

Microsoft® Windows Server® 2012 Standard

Microsoft® Windows Server® 2012 Essentials

Microsoft® Windows Server® 2012 Foundation

Preface

FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)

•Trademark symbols such as ™ and ® are omitted in this document.

ETERNUS Disk storage system models

The following naming conventions describe ETERNUS Disk storage system models in this manual.

Units in this manual

Except as otherwise noted, the following units are used in this manual:

•Drive capacity assume that 1KB = 1000 bytes, 1MB = 1000KB, 1GB = 1000MB, and 1TB = 1000GB

(example: "600GB drive").

•Other capacities (such as for RAID Groups and volumes) assume that 1KB = 1024 bytes, 1MB = 1024KB,

1GB = 1024MB, and 1TB = 1024GB.

Microsoft® Windows Server® 2012 R2 Datacenter

Windows Server 2012 R2Microsoft® Windows Server® 2012 R2 Standard

Microsoft® Windows Server® 2012 R2 Essentials

Product name Abbreviation

ETERNUS Disk storage system model Naming conventions

ETERNUS DX100 S3/DX200 S3 Disk storage system,

ETERNUS DX500 S3/DX600 S3 Disk storage system,

ETERNUS DX200F All Flash Array

storage system

ETERNUS DX

ETERNUS DX100 S3/DX200 S3 Disk storage system,

ETERNUS DX500 S3/DX600 S3 Disk storage system ETERNUS DX S3 series

ETERNUS DX100 S3/DX200 S3 Disk storage system ETERNUS DX100 S3/DX200 S3

ETERNUS DX500 S3/DX600 S3 Disk storage system ETERNUS DX500 S3/DX600 S3

ETERNUS DX200F All Flash Array ETERNUS DX200F

ETERNUS DX100 S3/DX200 S3,

ETERNUS DX500 S3/DX600 S3,

ETERNUS DX200F,

ETERNUS DX90 S2,

ETERNUS DX410 S2/DX440 S2,

ETERNUS DX8100 S2/DX8700 S2,

ETERNUS DX90,

ETERNUS DX410/DX440,

ETERNUS DX8100/DX8400/DX8700,

ETERNUS4000/ETERNUS8000,

ETERNUS6000

ETERNUS Disk storage system

ETERNUS DX410/DX440 Disk storage system ETERNUS DX410/DX440

ETERNUS DX8100/DX8400/DX8700 Disk storage system ETERNUS DX8100/DX8400/DX8700

Preface

FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)

Setting Procedures in This Manual

Detailed information about the setup parameters (descriptions and input conditions) in operating procedures

are described in "ETERNUS Web GUI User’s Guide (Settings)". Refer to "Appendix Parameter List" in "ETERNUS

Web GUI User’s Guide (Settings)" for details.

For detailed information about the display contents and how to check the results of the configuration, refer to

"ETERNUS Web GUI User’s Guide (Operation)".

Note that the screen shots in this manual were captured during development of the software and the actual

screens may be different.

Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.

FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)

Table of Contents

Chapter 1 Outline 12

1.1 Outline .............................................................................................................................. 12

1.2 Features ............................................................................................................................ 13

1.3 Notes for Using GUI ........................................................................................................... 14

1.4 Operating Environment .................................................................................................... 15

1.5 User Management ............................................................................................................ 17

1.6 Screen Operations ............................................................................................................. 18

Chapter 2 Startup and Shutdown 19

2.1 Startup of GUI ................................................................................................................... 19

2.2 Login ................................................................................................................................ 21

2.3 Logout .............................................................................................................................. 23

2.4 Exit from GUI ..................................................................................................................... 24

Chapter 3 Initial Setup 25

3.1 Initial Setup 1 ................................................................................................................... 26

3.2 Initial Setup 2 ................................................................................................................... 35

Chapter 4 Configuration Settings for RAID Groups or Thin Provisioning 51

4.1 Usage for RAID Groups and Thin Provisioning ................................................................... 51

4.2 When Using Standard Volumes ......................................................................................... 52

4.3 When Using SnapOPC+ (SDVs and SDPVs) ......................................................................... 53

4.4 When Using Thin Provisioning Volumes (TPVs) ................................................................. 54

4.4.1 Set Thin Provisioning .....................................................................................................................................55

4.4.2 Create Thin Provisioning Pool ........................................................................................................................56

4.4.3 Create Volume ...............................................................................................................................................63

Table of Contents

FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)

Chapter 5 Host Interface Management 67

5.1 Add LUN Group ................................................................................................................. 69

5.2 Modify Port Parameters .................................................................................................... 72

5.2.1 Modify FC Port Parameters ............................................................................................................................. 72

5.2.2 Modify iSCSI Port Parameters .........................................................................................................................76

5.2.3 Modify SAS Port Parameters ...........................................................................................................................83

5.2.4 Modify FCoE Port Parameters .........................................................................................................................85

5.3 Create CA Port Groups .......................................................................................................87

5.4 Set Host Response ............................................................................................................ 89

5.5 Add Host Groups ............................................................................................................... 90

5.6 Create Host Affinity ........................................................................................................... 95

5.7 Modify CA Reset Group .................................................................................................... 102

Chapter 6 Settings for the Advanced Copy Environment 103

6.1 Required settings for the Advanced Copy function (Local Copy and Remote Copy) .........103

6.1.1 Preparation .................................................................................................................................................. 103

6.1.2 Copy Session Management .......................................................................................................................... 105

6.2 Required Settings for the Advanced Copy Function (ODX) ............................................... 106

6.2.1 Advanced Preparation .................................................................................................................................106

6.2.2 Copy Session Management .......................................................................................................................... 106

6.2.3 Stop ODX ..................................................................................................................................................... 106

Chapter 7 System Environment Settings 107

7.1 Required Settings for the Key Management Function ..................................................... 107

7.1.1 Required Settings for the Key Management Function .................................................................................. 107

Appendix A Installing the Security Certificate 111

A.1 For Internet Explorer........................................................................................................111

A.2 For Firefox........................................................................................................................ 118

Appendix B Structures for Host Connection 123

Appendix C Estimated Advanced Copy Source Capacity 126

Andere Handbücher für ETERNUS DX100 S3

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fujitsu Lagerung Handbücher

Fujitsu

Fujitsu ETERNUS DX100 S3 Bedienungsanleitung

Fujitsu

Fujitsu MAH3091MC - Enterprise 9.1 GB Hard Drive Bedienungsanleitung

Fujitsu

Fujitsu MHV2080BS Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS AB Series Technisches Handbuch

Fujitsu

Fujitsu MHX2300BT - Mobile 300 GB Hard Drive Bedienungsanleitung

Fujitsu

Fujitsu MPG3xxxAT Bedienungsanleitung

Fujitsu

Fujitsu MHJ2181AT Bedienungsanleitung

Fujitsu

Fujitsu MDG3064UB Bedienungsanleitung

Fujitsu

Fujitsu DynaMO 640SZI Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS LT40 S2 Anleitung zur Verwendung

Fujitsu

Fujitsu Eternus DX80 S2 Bedienungsanleitung

Fujitsu

Fujitsu MHT2020AT Bedienungsanleitung

Fujitsu

Fujitsu MBB2147RC SERIES Bedienungsanleitung

Fujitsu

Fujitsu MAT3300FC Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX200 S3 Bedienungsanleitung

Fujitsu

Fujitsu GRANPOWER 5000 GP5-HDH451 Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS LT140 Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX60 S2 Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS2000 100 Bedienungsanleitung

Fujitsu

Fujitsu RE25U Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX8100 S3 Technisches Handbuch

Fujitsu

Fujitsu ETERNUS2000 model 100 Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX60 S2 Bedienungsanleitung

Fujitsu

Fujitsu MHV2200BT Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung