Fujitsu ETERNUS Bedienungsanleitung

Server Connection Guide (iSCSI) for Oracle Solaris

P3AM-4182-03ENZ0

Preface

This document briefly explains the operations that need to be performed by the user in order to

connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or

ETERNUS8000 model 700, 800, 900, 1100, 1200, 2100, or 2200 Disk storage system to a

server running Solaris OS via an iSCSI interface.

This document should be used in conjunction with any other applicable user manuals, such as

those for the ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or

ETERNUS8000 model 700, 800, 900, 1100, 1200, 2100, or 2200 Disk storage system, server,

OS used, LAN cards, drivers, etc.

Note that this manual refers the following documents:

•Server Support Matrix

•ETERNUS Disk storage systems Server Connection Guide (iSCSI) ETERNUS Disk Storage

System Settings for ETERNUS2000

•ETERNUS Disk storage systems Server Connection Guide (iSCSI) ETERNUS Disk Storage

System Settings for ETERNUS4000, ETERNUS8000

•ETERNUSmgr Install Guide

•ETERNUSmgr User Guide

Also, note that in this document the ETERNUS2000 models 100 and 200, ETERNUS4000 mod-

els 300, 400, 500, and 600, and ETERNUS8000 models 700, 800, 900, 1100, 1200, 2100, and

2200 Disk storage systems are collectively referred to as ETERNUS Disk storage systems.

Third Edition

December 2010

The Contents and Structure of this Manual

This document is composed of the following ten chapters.

•Chapter 1 Workflow

This describes how to connect the ETERNUS Disk storage system to a server.

•Chapter 2 Checking the Server Environment

This describes which servers can be connected to ETERNUS Disk storage systems.

•Chapter 3 Notes

This describes issues that should be noted when connecting the ETERNUS Disk storage

systems and server.

Preface

Server Connection Guide (iSCSI) for Oracle Solaris

P3AM-4182-03ENZ0

•Chapter 4 Checking the Server Information

This describes how to check the server information registered in the ETERNUS Disk storage

system.

•Chapter 5 Installing and Setting Up ETERNUSmgr

This describes how to install ETERNUSmgr.

•Chapter 6 Setting Up the ETERNUS Disk Storage Systems

This describes how to use ETERNUSmgr to set up the ETERNUS Disk storage systems.

•Chapter 7 Installing the iSCSI Software Initiator and Setting Up the Server

This describes how to install the iSCSI Software Initiator and set up the server.

•Chapter 8 Checking Connections

This describes how to check the connection status between server and ETERNUS Disk

storage systems.

•Chapter 9 Setting Up the Multipath Configuration

This describes what to be set in order to create multipath environment.

•Chapter 10 Creating a File System

This describes how to create a file system.

Safe Use of this Product

■Using this manual

This manual contains important information to ensure the safe use of this product. Be sure to

thoroughly read and understand its contents before using the product. After reading, store this

manual in a safe place for future reference.

FUJITSU has made every effort to ensure the safety of the users and other personnel, and to

prevent property damage. When using this product, carefully follow the instructions described in

this manual.

Acknowledgments

•Oracle and Java are registered trademarks of Oracle and/or its affiliates.

•All SPARC trademarks are used under license and are trademarks or registered trademarks

of SPARC International, Inc. in the United States and other countries.

•The company names, product names and service names mentioned in this document are

registered trademarks or trademarks of their respective companies.

Preface

Server Connection Guide (iSCSI) for Oracle Solaris

P3AM-4182-03ENZ0

Naming Conventions

■Product names

Oracle Solaris might be described as Solaris, Solaris Operating System, or Solaris OS.

■Other names

•"iSCSI port" or "Channel Adapter" (CA) refers to the iSCSI interface module used in the

ETERNUS Disk storage systems to connect to the server.

•"LAN card" refers to the iSCSI interface module normally used in the server. A "Network

Interface Card" (NIC), "LAN adapter", or "LAN board" may be used instead, depending on the

server.

Server Connection Guide (iSCSI) for Oracle Solaris

P3AM-4182-03ENZ0

Contents

Chapter 1 Workflow ...................................................................................7

Chapter 2 Checking the Server Environment..........................................9

2.1 Hardware ............................................................................................................ 9

2.2 Basic Software ................................................................................................... 9

2.3 Network Interface Card ...................................................................................... 9

2.4 Multipath Configuration ...................................................................................... 9

Chapter 3 Notes .......................................................................................10

3.1 LAN Environment Notes ................................................................................... 10

3.2 Server Startup and Power Supply Control Notes ............................................. 11

Chapter 4 Checking the Server Information..........................................12

Chapter 5 Installing and Setting Up ETERNUSmgr ..............................13

Chapter 6 Setting Up the ETERNUS Disk Storage Systems................14

Chapter 7 Installing the iSCSI Software Initiator

and Setting Up the Server .....................................................15

7.1 Installing the iSCSI Software Initiator ............................................................... 15

7.2 Setting Up the Server ....................................................................................... 15

7.2.1 Setting Up the Command Queue Depth .................................................................................... 16

7.2.2 iSCSI Basic Settings .................................................................................................................. 17

7.2.3 Server Settings when CHAP Authentication is Used ................................................................. 19

7.2.4 Server Settings when Bidirectional CHAP Authentication is Used ............................................ 21

Chapter 8 Checking Connections ..........................................................23

8.1 Turning on the Devices .................................................................................... 23

8.2 Logical Unit Recognition .................................................................................. 23

Chapter 9 Setting Up the Multipath Configuration ...............................24

9.1 Enabling MPxIO ............................................................................................... 24

9.2 Reconfiguring and Restarting the Server ......................................................... 24

Chapter 10 Creating a File System...........................................................26

Server Connection Guide (iSCSI) for Oracle Solaris

P3AM-4182-03ENZ0

Chapter 1 Workflow

Exactly which documents are required depends on the connection environment, see the "Work-

flow" section that follows for details.

Required Documents

•Server Support Matrix

•ETERNUS Disk storage systems Server Connection Guide (iSCSI) ETERNUS Disk Storage

System Settings for ETERNUS2000

•ETERNUS Disk storage systems Server Connection Guide (iSCSI) ETERNUS Disk Storage

System Settings for ETERNUS4000, ETERNUS8000

•ETERNUS Disk storage systems Server Connection Guide (iSCSI) for Oracle Solaris (this

manual)

•ETERNUSmgr Install Guide

•ETERNUSmgr User Guide

Workflow

Install ETERNUSmgr and Set Up the ETERNUS Disk Storage System

If ETERNUSmgr is to be used, install it and set up the ETERNUS Disk storage system.

Refer

-"Chapter 4 Checking the Server Information" (page 12)

-"Chapter 5 Installing and Setting Up ETERNUSmgr" (page 13)

-"Chapter 6 Setting Up the ETERNUS Disk Storage Systems" (page 14)

-Install ETERNUSmgr.

•"ETERNUSmgr Install Guide"

-Check the setup and maintenance operations.

•"ETERNUSmgr User Guide"

-Set up the ETERNUS Disk storage system.

•"ETERNUS Disk storage systems Server Connection Guide (iSCSI) ETERNUS

Disk Storage System Settings for ETERNUS2000"

•"ETERNUS Disk storage systems Server Connection Guide (iSCSI) ETERNUS

Disk Storage System Settings for ETERNUS4000, ETERNUS8000"

Chapter 1 Workflow

Server Connection Guide (iSCSI) for Oracle Solaris

P3AM-4182-03ENZ0

Install the iSCSI Software Initiator and Set Up the Server

Set up the OS to connect to the ETERNUS Disk storage system.

Refer

-"Chapter 7 Installing the iSCSI Software Initiator and Setting Up the Server" (page 15)

Set the Server to Recognize the Logical Units

Set up the server so that it can recognize the ETERNUS Disk storage system logical units

(LUN).

Refer

-"8.2 Logical Unit Recognition" (page 23)

Configure the System

Set up the server as required by the system configuration.

Refer

-Set the multipaths.

•"9.1 Enabling MPxIO" (page 24)

-Set a file system.

•"Chapter 10 Creating a File System" (page 26)

Server Connection Guide (iSCSI) for Oracle Solaris

P3AM-4182-03ENZ0

Chapter 2 Checking the Server Environment

Server environment details are provided in the "Server Support Matrix".

2.1 Hardware

Refer to the "Server Support Matrix" for details.

2.2 Basic Software

Refer to the "Server Support Matrix" for details.

2.3 Network Interface Card

Refer to the "Server Support Matrix" for details.

2.4 Multipath Configuration

Refer to the "Server Support Matrix" for details.

Server Connection Guide (iSCSI) for Oracle Solaris

P3AM-4182-03ENZ0

Chapter 3 Notes

3.1 LAN Environment Notes

•The ETERNUS Disk storage system can be connected to a server via an existing LAN.

However, a decrease in LAN performance may be observed by prior users of said LAN.

•For the iSCSI LAN (used to transfer data), do not set multipath configuration with IP Network

Multipathing (IPMP).

•As with an FC-SAN, because of the large data flows (traffic volumes) the iSCSI LAN is

assumed to be a dedicated LAN separate from the business and management LANs, and

constructed with its own LAN switch.

•For IP network security reasons too, it is useful to separate the iSCSI LAN (for data transfers)

and management LAN (for administration) to prevent cross-access between them (use of

VLAN to separate the LAN segments is recommended).

•A configuration where multiple LAN ports of a single server are connected to the same

network may be restricted depending on the OS and/or driver specifications. For a multipath

connection, connect each path using different LAN segments by separating the VLAN and so

on.

Andere Handbücher für ETERNUS

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fujitsu Lagerung Handbücher

Fujitsu

Fujitsu C141-E280 Bedienungsanleitung

Fujitsu

Fujitsu Storage ETERNUS CS800 M1 Handbuch

Fujitsu

Fujitsu ETERNUS DX60 S3 Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS LT140 Bedienungsanleitung

Fujitsu

Fujitsu MAY2036RC Product/ Bedienungsanleitung

Fujitsu

Fujitsu RE25U Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS... Bedienungsanleitung

Fujitsu

Fujitsu MBC2036RC SERIES Bedienungsanleitung

Fujitsu

Fujitsu MHW2060BK - Mobile 60 GB Hard Drive Bedienungsanleitung

Fujitsu

Fujitsu MDG3064UB Bedienungsanleitung

Fujitsu

Fujitsu Citrix XenServer Bedienungsanleitung

Fujitsu

Fujitsu MHU2100AT Bedienungsanleitung

Fujitsu

Fujitsu MAF3364LC - Enterprise 36.4 GB Hard Drive Bedienungsanleitung

Fujitsu

Fujitsu PG-HDH97A Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX S5 Series Leitfaden

Fujitsu

Fujitsu HARD DISK DRIVES MAW3073FC Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX60 Leitfaden

Fujitsu

Fujitsu PG-HD2E4H Bedienungsanleitung

Fujitsu

Fujitsu MHT2060BH - Mobile 60 GB Hard Drive Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY S10 Bedienungsanleitung

Fujitsu

Fujitsu MAS3184NC/NP Bedienungsanleitung

Fujitsu

Fujitsu Eternus DX80 S2 Bedienungsanleitung

Fujitsu

Fujitsu GP5-HD9G3 Bedienungsanleitung

Fujitsu

Fujitsu M2301B Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung