Fun Tech iDeao hub Bedienungsanleitung
Quick Start Guide
Interactive Touch Screen
Visit FTI webstie to download multi-language quick start guide
https://funtechinnovation.com/downloads/
Important Safety, Compliance
and Warranty Information
POWER SUPPLY WARNING!
BATTERY WARNING!
Safe Usage Guidelines for Products
*Read Manual Before Product Use*
The power supply is for indoor use only. Only use the power supply included with
your product. Do not attempt to repair or use a damaged power supply. Do not
immerse the power supply in water or subject it to physical abuse. Inspect the
power supply regularly for cable, plug, and casing damage.
Improperly replaced batteries may present a risk of leak or explosion and
personal injury. Mistreated rechargeable batteries may present a risk of re or
chemical burn. Do not disassemble or expose to conducting materials, moisture,
liquid, or heat above 54° C (130° F). Do not use or charge the battery if it appears
to be leaking, discolored, deformed, or in any way abnormal. Do not leave your
battery discharged or unused for extended periods. Do not short circuit. Your
device may contain an internal, rechargeable battery that is not replaceable.
Battery life varies with usage. Non-operational batteries should be discarded
according to local laws. If no laws or regulations govern, dispose of your device in
a waste bin for electronics. Keep batteries away from children.
• Do not open or modify the product except for battery removal and replacement.
• Do not disassemble or attempt to service this product.
• This product is safe under normal and reasonably foreseeable misuse operating
conditions.
• If product is operating improperly, contact the authorized reseller.
• Product must be returned to the authorized reseller for any service or repair.
• This is not a Children's Product and is not intended for use by children under 14
years old.
3
FunTech Innovation Compliance.
FCC Statement
For Product Safety, EMC, RF and Energy information, go to www.funtechinnovation.
com/compliance Maintenance is not required for product compliance.
This product complies with relevant legal requirements for Restriction of Hazardous
Substances (RoHS) and management of waste electronic and electrical equipment
(WEEE). For RoHS and WEEE information, go to www.funtechinnovation.com/
compliance
Batteries, electronic and electrical equipment should not be disposed of
with household waste. Wherever possible, they should be segregated
and brought to an appropriate collection point to enable recycling and
avoid potential impacts on the environment and human health. For more
information, contact your local authorities or place of purchase.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: 1) this device may not cause harmful interference, and 2)
this device must accept any interference received, including interference that may
cause undesired operation. This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy. And, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: Where shielded interface cables or accessories have been provided
with the product or specified additional components or accessories elsewhere
defined to be used with the installation of the product, they must be used in
order to ensure compliance with FCC. Changes or modications to product not
expressly approved by Fun Technology Innovation Inc, could void your right to
use or operate your product by the FCC.
IC statement:
CAN ICES003 (B) / NMB003 Class (B)
VCCI-B
FunTech Innovation’s Limited Hardware
Product Warranty - A Summary
This device complies with Industry Canada license exempt RSS standard(s)
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation
of the device. Cordless (Radio Transmitter) products: Section A. RSS310 (27
MHz transmitters and receivers): This Category II radio communication device
complies with Industry Canada Standard RSS310. Section B. RSS210 (2.4
GHz transmitters or transceivers): This Category I radio communication device
complies with RSS210 of Industry Canada.
この装置は、クラス B 情報技術装置です。この装置は、家庭環境で使用すること
を目的としていますが、この装置がラジオやテレビジョン受信機に近接して使用
されると、受信障害を引き起こすことがあります。取扱説明書に従って正しい取
り扱いをしてください。
FunTech Innovation warrants that its hardware product shall be free from defects
in materials and workmanship for the length of time identied on your product
package beginning from the date of original retail purchase. See for specific
warranty information about your product and procedures to act on a warranty
claim.
FunTech Innovation’s entire liability and your exclusive remedy for any breach of
warranty shall be, at FunTech Innovation’s option, to repair or replace a functional
equivalent of the product, or to refund the price paid, it the hardware is returned
to the point of purchase or such other place as FunTech Innovation may direct
along with a receipt. Warranty protections are in addition to rights provided
under local consumer laws and may vary among countries. See the full warranty
information to know your consumer rights and the additional protections provided
by this product warranty.
・Near heat sources
・Near steam or greasy smoke
・Location with high humidity
・Sandy or dusty places
Do not use/store the product in the following
Precaution
4 54 5
Safety Instruction
For your safety, please read the following instruction before you use the product.
Serious injury or property damage may be caused by improper operations. Do not try
to repair the product on your own.
WARNING
Disconnect the product from power supply immediately if major failures occur.
Major failures include the following:
● Smoke, peculiar smell or abnormal sound is discharged from the product.
● No image or sound is displayed, or the image error occurs.
In the preceding scenarios, do not continue to use the product. Disconnect power
supply immediately and contact professional sta for troubleshooting.
Do not drop liquid, metal or anything combustible into the product.
● If any liquid or metal is dropped into the product, power o the product and
disconnect power supply, then contact professional sta for solutions.
● Pay attention to children when they are close to the product.
Put the product on a stable surface. An unstable surface includes and does not
limited to an inclined plane, a shaky stand, desk or platform, which might cause
turnover and damage.
Do not open the cover or change the product on your own. High voltage
components are installed in the product. When you open the cover, high voltage,
electric shock, or other dangerous situations may occur. If inspection, adjustment,
or maintenance is required, contact the local distributor for help.
Use the specied power supply.
● To prevent the product from being damaged, do not use any types of power cables
other than the one provided with the product.
● Use a three-wire socket and ensure that it is properly grounded.
● Pull out the power plug from the socket if the product is not used for a long period.
Clean the dust and metal on the power plug regularly.
● Fire or electric shock may be caused if the product is powered on, when you are
cleaning.
● Pull out the power plug before cleaning it with a dried cloth.
Power output port is 5V/1A for USB Type-A 3.0 port, 5V/0.5A for USB Type-A 2.0,
5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.25A for USB Type-C.
Do not put items on the top of the product.
● Do not put items, such as a container for liquid (a vase, flowerpot, cosmetics or
liquid medicine) on the top of the product.
● If any water or liquid is spilled on the product, a short circuit may occur and
cause re or electric shock.
● Do not walk on the product.
WARNING
Do not install the product in an improper place.
● Do not install the product in humid places, such as the bathroom, the shower
room, near windows, or outdoor environments that experience rain, snow or
other harsh weather. Avoid installation near hot spring vapor. The preceding
environments may cause faults in the product or electric shock under extreme
conditions.
● Do not put exposed re source, such as an ignited candle, on the product.
Pull out the power plug during thunderstorms.
● Do not touch the product during a lighting storm to avoid electric shock.
● Install or place components that supply high enough voltage to cause personal
injury out of the reach of children.
Do not touch the power cable with wet hands.
Do not install the product in high temperature environments.
● Do not install the product near a heat source, such as a radiator, a heat reservoir,
a stove or other heating products.
● Do not expose the product to direct sunlight, which may cause high temperatures
and subsequent faults in the product.
For transport.
● Pack the product for transport or maintenance by using the cartons and
cushioning material provided with the product.
● Vertically move the product during transport. The screen or other components
are easily broken if the product is moved by an improper way.
● Before you move the product, disconnect all external connections and separate
all toppling preventing products. Move the product carefully to prevent it from being
hit or squeezed, especially the screen, which may cause injury if broken.
Do not cover or block up any vents on the product.
● Any overheated components may cause re, damage the product, and shorten
the service life.
● Do not lay the product down where the venting surface will be covered.
● Do not install the product on a carpet or cloth.
● Do not use a cloth such as table cloth to cover the product.
Keep away from the product when you use a radio.
The product complies with the international EMI standard to pervent radio
interference. However, interference may still exists and causes noise in the radio. If
noise occurs in the radio, try the following solutions.
● Adjust the direction of the radio antenna to avoid the interference from the
product.
● Keep the radio away from the product.
6 7
Ideao Hub is a versatile 24” QHD interactive touch monitor to
revolutionize the way you collaborate. With a simply plug of a
cable, you can easily transform your PC to a giant touch screen,
take notes on your document with full Windows Ink compatibility,
extend connectivity with 10 I/O ports, and enjoy the smoothest
touch and write experience with Ideao Hub.
Unleash your creativity!
Monitor Stand Neck Stand Base
Neck Screws x4
Screwdriver x1
USB Cable
(Type-C to Type-C)
Power Cables
USB Cable
(USB 3.0 A to B)
AC/DC Adapter Quick Start Guide
Pen Holder
Package contents
WARNING
Glass lens is broken or falls o.
● In case of glass lens breakage, keep all personnel away from the hub to ensure
safety.
● Do not perform any installation or disassembly when the glass lens is broken or
falls o.
Use the battery correctly.
● Galvanic corrosion, electric leakage, and even re may be caused by improper
battery usage.
● It is recommended to use the designated type of battery and install the battery by
correct electrodes (positive and negative).
● Do not install and use new battery with a used one.
● Do not expose the battery to overheated environments such as sunlight and
ring.
● Dispose of the used battery based on your local regulations.
Do not damage the power cable.
● Do not damage, change, twist, bend, or forcibly drag the power cable.
● Do not put weights (such as the product itself) on the power cable.
● Do not forcibly drag the cable when you pull out the power plug. If the power
cable is damaged, please contact the local distributor to repair or replace it.
● The power cable in the accessory box is for this product only. Do not use it on
other products.
Additional advice:
● Use the product in an environment with comfortable lighting. It is harmful to your
eyes to watch in a too bright or too dark environment.
● Relax your eyes after a period of time for watching.
● Keep sufficient distance from the product to protect your eyes and prevent eyestrain.
● Adjust the volume to an appropriate level, especially at night.
● Use amplier equipment as the audio input source with caution. If you must use
amplier equipment, the input power should not exceed the maximum of speaker
power. Otherwise, the speaker can become overpowered and damaged.
About USB ports.
A side USB 3.0 port and rear USB 2.0 ports switch connections based on signal
sources. (USB Type C or other signal connection + USB Type B). Please do not
change signal sources while the signal source is reading the data from the external
source connected to the Hub’s USB port. Otherwise, the data or the external
memory may get damaged.
For any product /warranty related question please visit
www.funtechinnovation.com/support
8 9
10
Overview
Pen Holder
1
LED Indicator
2
Power Button
4
Speakers
3
11
I/O Ports
6
ca begid fh
j
DC IN Connects to the power adapter.
DVI-D Connects to a source device using a DVI-D cable.
HDMI Connects to a source device using a HDMI cable.
USB Type C Connects to a source device using a USB Type-C
cable for video, audio, touch, and power supply.
VGA (D-SUB) Connects to a video source device using a
VGA cable.
AUDIO IN Connects to an audio input device, used with
VGA device.
AUDIO OUT Connects to an audio output device such as
headphones.
USB-A 2.0 Connect to a USB device, such as memory drive,
mouse, keyboard, and speakerphone.
USB-B Connects to a PC to use the touch function.
USB-A 3.0 Connect to a USB device, such as memory drive,
mouse, keyboard, and speakerphone.
a
b
c
d
e
f
g
h
i
j
Kensington Security SlotTM
5
Base Screw
12
12
Installing the Stand
Stand Neck
9
Monitor
7VESA Mount 100X100mm
8
Stand Base
11
Foam
1.
2.
Place the monitor on the foam to protect its surface.
13
Neck screws *4 (M4X10mm) 10
Ideao Pen (Optional)
14
Pen holder
13
Foam
3.
4.
M4 Philips screwdriver
Connecting the Ideao Hub
Plug the power supply into the power outlet fully and plug the power
connector into the side of the product. Ensure the power is in the range of
100V to 240V with frequency at 50Hz/60Hz ± 5%.
Connect your PC or laptop to the Ideao Hub using a USB Type-C,
HDMI/DVI, or VGA cable. Connecting ports may dier in dierent
products.
Connecting the devices using a USB Type-C cable
(1) USB Type-C port with video, audio touch and power
(Alternate mode with DisplayPort 1.2, Power Delivery up to 65 W)
Connecting to a PC or Laptop
14
USB Type-C USB Type-C
Connecting the devices using a HDMI cable
(1) Connect your PC or Laptop to the Ideao Hub using a HDMI Cable.
(2) To use the touch function, connect USB Type-B on the Ideao Hub
to a USB-A port on the PC or laptop using the USB cable.
*HDMI cable is not included in the package.
15
HDMI
USB-B
HDMI
USB-A
The power current must be grounded.
Do not remove the ground prong / grounded contact.
For Japanese version, only the Type B power code is included
in the box. This power cord support up to 100V and can be used
in Japan only. For other countries, please use the corresponding
power cord. Please ensure your computer USB Type-C end supports DP Alt-
mode, in order to display properly. For more information, please
check table in P.18.
Type F
Grounded contact
Type I
Grounded prong
Type G
Ground prong
Type M
Ground prong
Type B
Ground prong
Type O
Ground prong
Connecting the devices using a DVI or VGA cable
(1) Connect your PC or Laptop to the Ideao Hub using a DVI or VGA
Cable for video source.
(2) Connect Audio In on the Ideao Hub to an Audio Out on the PC or
laptop using an audio cable for audio source.
(3) To use the touch function, connect USB Type-B on the Ideao Hub
to a USB-A port on the PC or laptop using the USB cable.
*DVI, VGA, and Audio cables are not included in the package.
DVI / VGA
/ /
DVI / VGA
USB-B
Audio In
USB-A
Audio Out
16 17
Connect your smartphone using a USB-C cable.
*USB-C supports power supply.
*Available for Android smartphones that support USB Type-C
DisplayPort Alt Mode.
*Touch back may vary depending on model.
Connecting to a Smartphone
USB Type-C USB Type-C
Video
Source
Audio
Source
USB Signal for
Touch Back Power
USB
Type-C O O O O
HDMI O O X
Via USB-B X
DVI /
VGA OX
Via Audio Cable
X
Via USB-B X
18
Adjusting the StandUSB Type-C specication table
Swivel
Lift & Tilt
45°
-5°~60°
90°
45°
19
USB-C Connector Data
Transfer Display Power
USB 2.0
480 Mbps
O X X
O X O
USB 3.1 Gen 1
5 Gbps
O X X
O X O
USB 3.1 Gen 2
10 Gbps
O X X
O X O
DisplayPort
5-10 Gbps
O O X
O O O
Thunderbolt
20-40 Gbps
PD Enabled
DisplayPort
O O O
Normal
PD Enabled
PD Enabled
PD Enabled
Normal
Normal
Normal
PD Enabled
Inhaltsverzeichnis
Beliebte Touchscreen Handbücher anderer Marken
IBASE Technology
IBASE Technology ASTUT-152-RE1S Bedienungsanleitung
YASKAWA
YASKAWA TP 610C Bedienungsanleitung
B&R
B&R Power Panel C Series Bedienungsanleitung
Beijer Electronics
Beijer Electronics X2 control Bedienungsanleitung
AXIOMTEK
AXIOMTEK GOT321W-521 Bedienungsanleitung
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Bedienungsanleitung
