Furuno GP-1610CF Handbuch

GP-1610CF

Color GPS Plotter Sounder

The purpose of this Operator's Guide is to provide the basic operating procedures for this equip-

ment. For more detailed information see the operator's manual.

Course bar

PLOTTER

DISPLAY SOUNDER

DISPLAY

Fish school

Bottom

Position-fixing mode

Time

Position

CSE 350.0°SPD 16.8kt 2D

DEP 110 m

TMP16.0°C 13:42

POS 34°26.345’N 135°41.232’E

50k

100

150

200 Sounder frequency

Ship’s track

Waypoint

(Marks important

point (buoy, etc.);

can be set as

destination.)

Mark

(Marks point

of interest,

reef, etc.)

Chart

(Requires chart

card.)

Depth

Course

Water temperature

(Requires sensor.)

Speed

Depth scale

(Shown here

in meters.)

Own ship mark

(Shows current

position.)

Sample plotter/sounder display

The GP-1610CF is a fully integrated color video sounder, color video plotter and GPS receiver.

To find position, simply turn on the power. As your boat moves its track is inscribed on the

display.

Do not disassemble or modify the

equipment.

Fire, electrical shock or serious injury

can result.

Turn off the power immediately if water

leaks into the equipment or the equip-

ment is emitting smoke or fire.

Continued use of the equipment can cause

fire or electrical shock.

Do not place liquid-filled containers on

the top of the equipment.

Fire or electrical shock can result if a

liquid spills into the equipment.

Do not operate the equipment with wet

hands.

Electrical shock can result.

Keep heater away from equipment.

Heat can alter equipment shape and melt

the power cord, which can cause fire or

electrical shock.

Do not open the equipment.

Hazardous voltage which can

cause electrical shock, burn or

serious injury exists inside the

equipment. Only qualified

personnel should work inside

the equipment.

WARNING

Use the proper fuse.

Use of a wrong fuse can result in fire or

permanent equipment damage.

GPS position and velocity accuracies

are controlled by the U.S. Department

of Defense. Position may be degraded

up to 100 meters.

Do not use the equipment for other than

its intended purpose.

Personal injury can result if the equipment

is used as a chair or stepping stool, for

example.

Do not place objects on the top of the

equipment.

The equipment can overheat or personal

injury can result if the object falls.

CAUTION

SAFETY INSTRUCTIONS

Inserting a Chart Card

1Turn off the power.

2Open the chart card drive cover at the bottom of the display unit.

Screws

Cover

3Insert chart card label side up, arrow forward.

EJEC

button

Chart

card

Arrow forward

4Close the chart card drive cover.

To eject a chart card:

1Open the chart card drive cover.

2Press the EJECT button.

Note: If no chart card is inserted a general world map appears.

Displaying the Plotter Picture

Press the POWER key to turn on the equipment.A beep sounds and shortly thereafter the plotter

display appears.

Results of self-test;

displayed for about

one second.

Warning on chart

card usage; appears

for about one minute.

ACQ means acquiring

satellite; position is

not reliable.

Plotter display

(Position being

calculated.)

ROM

RAM

VRAM

Battery

ProgramNo.

BaseChartNo.

02522531**

NO NATIONAL HYDROGRAPHIC

OFFICE HAS VERIFIED THE

INFORMATION IN THIS COASTLINE

DATA CARD AND NONE ACCEPT

LIABILITY FOR THE ACCURACY OF

REPRODUCTION OR ANY

MODIFICATIONS MADE THEREAFTER.

THIS PRODUCT WITH THIS

COASTLINE DATA CARD DOES NOT

REPLACE THE REQUIREMENT TO

USE THE APPROPRIATE PRODUCTS

FOR NAVIGATION ACCORDING TO

NATIONAL AND INTERNATIONAL

REGULATONS.

——WARNING——

FURUNO ELECTRIC CO., LTD.

BRG+ 232.0°RNG+ 0.00nm ACQ

DEP 110m TMP 16 .0°C 13:41

+ 34°43.801’N 135°21.163’E

BRG+ 232.0°RNG+ 0.00nm 2D

DEP 110m TMP 16 .0°C 13:41

+ 34°43.801’N 135°21.163’E

Plotter display

(Position now reliable.

Chart appears about

20 sec after power

is turned on. At initial

power on it takes

two minutes.)

2D or 3D means

position is reliable.

Confirm this indi-

cation before using

the equipment.

1Press the POWER key.

ESC NU/CU

ENT

SNDR

1PLTR

AUTO

2EVENT

MOB 7

WPT

3GOTO

ZOOM

OUT 9

CNTR

CLR

TONE

POWER

ZOOM

IN 4

CURS

ESC NU/CU

ENT

SNDR

1PLTR

AUTO

2EVENT

MOB 7

WPT

3GOTO

ZOOM

OUT 9

CNTR

CLR

TONE

POWER

ZOOM

IN 4

CURS

Adjusting Tone and Brilliance

TONE : 5

BRILL : 8

LOW HIGH

1Press the TONE key.

2Press tor sto adjust tone.

3Press ▲or ▼to adjust

brilliance.

Adjust tone or brilliance

within 10 seconds,

otherwise the display

will be erased.

Ten levels of tone are

provided.

Eight levels of brilliance

are provided.

Changing the Display

There are ten displays. Below is the procedure for how to display the three most common dis-

plays.

BRG+ 232.0°RNG+ 0.00nm 2D

DEP 110m TMP 16 .0°C 13:41

+ 34°43.801’N 135°21.163’E

SELECT SOUNDER MODE

SNDR: Sel ESC: Close

Normal

Marker Zoom

Bottom Zoom

Bottom Lock

A-Scope

50kHz

200kHz

1Press the SNDR key.

2Press the ESC key.

50k

162

100

150

200

CSE 180.0°SPD 16.8kt

DEP 162m TMP 16.0 °C

13:41

POS 34°26.245’N 135°41.232’E

The plotter display is currently

shown. This display shows

chart, ship’s track (when ship

moves), etc.

Switch to the

normal sounder

display.

Confirm that "Normal" appears

in reverse video. If it does not,

press ▲to do so.

The sounder display shows

underwater conditions.

ESC NU/CU

ENT

SNDR

1PLTR

AUTO

2EVENT

MOB 7

WPT

3GOTO

ZOOM

OUT 9

CNTR

CLR

TONE

POWER

ZOOM

IN 4

CURS

3Press the PLTR key.

4Press ▼to select

Plotter/Sounder.

SELECT PLOTTER MODE

PLTR: Sel ESC: Close

Plotter

Plotter/Sounder

Data

Graphic

Highway

SELECT PLOTTER MODE

PLTR: Sel ESC: Close

Plotter

Plotter/Sounder

Data

Graphic

Highway

5Press the ESC key.

50k

100

150

200

BRG+ 232.0°RNG+ 0.00nm 2D

DEP 110 m TMP - - .-°C 13:50

+ 34°43.801’N 135°21.163’E

Switch to the

plotter/sounder

display.

The plotter display is

shown on the left 2/3

of the screen; the

sounder display on

the right 1/3.

ESC NU/CU

ENT

SNDR

1PLTR

AUTO

2EVENT

MOB 7

WPT

3GOTO

ZOOM

OUT 9

CNTR

CLR

TONE

POWER

ZOOM

IN 4

CURS

ESC NU/CU

ENT

SNDR

1PLTR

AUTO

2EVENT

MOB 7

WPT

3GOTO

ZOOM

OUT 9

CNTR

CLR

TONE

POWER

ZOOM

IN 4

CURS

How to Use the Cursor

Press ▲ ▼ t s.

Position

Cursor position is digi-

tally displayed on the

screen.

The CURS key

alternately displays and

erases the cursor.

50k

100

150

200

BRG+ 232.0°RNG+ 0.00nm 2D

DEP 110 m TMP - - .-°C 13:55

+ 34°43.801’N 135°21.163’E

Cursor

intersection

Cursor position

in lattitude and

longitude

Bearing and

range from

own ship to

cursor

If the cursor is not

displayed press

the CURS key.

50k

100

150

200

BRG+ 45.0°

RNG+ 0.37nm 2D

DEP 110 m TMP - - .-°C 14:00

+ 35°21.284’N 136°32.212’E

Latitude and longitude

position of cape

Bearing and

range from

own ship to

cape

Cape

50k

100

150

200

CSE 180.0°

SPD 0.0kt 2D

DEP 110 m TMP - - .-°C 14:23

POS 34°26.345’N 135°41.232’E

Course

Position

Speed

Turn off the

cursor.

Press the CURS key.

Find the

position of a

cape.

ESC NU/CU

ENT

SNDR

1PLTR

AUTO

2EVENT

MOB 7

WPT

3GOTO

ZOOM

OUT 9

CNTR

CLR

TONE

POWER

ZOOM

IN 4

CURS

Registering Your Harbor

By registering your harbor as a waypoint, you can later use it as a destination waypoint, when

returning home.

Press the WPT key.

Press the ENT key.

SELECT WPT MODE

WPT at Own Position

50k

100

150

200

CSE 180.0°SPD 0.0kt 2D

DEP 110 m TMP - - .-°C 14:35

POS

34°26.345’N 135°41.232’E

Confirm that "Own

Position" is in reverse

video. If it is not, press

▲to do so.

Own Position

Cursor

WPT List

Event to WPT

34°26.345’N

135°41.232’E

001

27MAR97 14

_ _

Before departing

bor as a waypoint.

Date and time of

entry appears.

WPT 01 is displayed at

own ship’s position.

Waypoints can be auto-

matically entered in

sequential order.

To erase a waypoint,

place the cursor on it

and press the CLR key.

Press the ENT key.

ENT: Sel ESC: Cancel

LAT:

LONG:

No:

MARK:

CMNT:

: Cursor : Column

ENT: Enter MENU: Sel Mode

Setting Destination

When you set a destination, this unit computes the range, bearing and course to the destination.

To display your destination on the screen select a small display range or scale. To set as destina-

tion a point which is 20 nm from your harbor do the following:



50k

100

150

200

CSE 180.0°SPD 0.0kt 2D

DEP 110 m TMP - - .-°C 14:40

POS 34°26.345'N 135°41.232'E

Press until position

for destination

appears.

50k

100

150

200

CSE 180.0°SPD 0.0 kt 2D

DEP 110 m TMP - - .-°C 14:53

POS 34°26.345'N 135°41.232'E

※



SELECT GOTO MODE





Set point as

destination.

WPT List

EVENT List

ROUTE List

Cursor/Route plan

Shrink display

range or scale.

If "Cursor/Route plan"

is not in reverse video,

press ▼to do so. ENT: Sel CLR: Release

ESC: Cancel

Press the GOTO key.

Press the ZOOM OUT key.

Destination

point

ESC NU/CU

ENT

SNDR

1PLTR

AUTO

2EVENT

MOB 7

WPT

3GOTO

ZOOM

OUT 9

CNTR

CLR

TONE

POWER

ZOOM

IN 4

CURS

Andere Handbücher für GP-1610CF

Inhaltsverzeichnis

Andere Furuno Marine-GPS-System Handbücher

Furuno

Furuno FELCOM 250 Bedienungsanleitung

Furuno

Furuno FM-3000 Gebrauchsanweisung

Furuno

Furuno FELCOM 250 Bedienungsanleitung

Furuno

Furuno GP-150 Bedienungsanleitung

Furuno

Furuno GP-1850WD Bedienungsanleitung

Furuno

Furuno Navpilot 500 Bedienungsanleitung

Furuno

Furuno GP-3500F Bedienungsanleitung

Furuno

Furuno GD-1700C Bedienungsanleitung

Furuno

Furuno FELCOM 250 Bedienungsanleitung

Furuno

Furuno SC-30 Betriebsanleitung

Furuno

Furuno GP-1610CF Bedienungsanleitung

Furuno

Furuno Precision PG-500 Bedienungsanleitung

Furuno

Furuno GP-3500F-D Bedienungsanleitung

Furuno

Furuno Navpilot 500 Bedienungsanleitung

Furuno

Furuno GP-32 Bedienungsanleitung

Furuno

Furuno GP-1850W Bedienungsanleitung

Furuno

Furuno NAVpilot-500 Bedienungsanleitung

Furuno

Furuno GP-1670F Bedienungsanleitung

Furuno

Furuno GP-1250 Bedienungsanleitung

Furuno

Furuno GP-80 Bedienungsanleitung

Furuno

Furuno SC-33 Bedienungsanleitung

Furuno

Furuno GP-50 Bedienungsanleitung

Furuno

Furuno GP-1600F Handbuch

Furuno

Furuno 1734C Bedienungsanleitung

Beliebte Marine-GPS-System Handbücher anderer Marken

JRC

JRC JHS-183 Bedienungsanleitung

Thuraya

Thuraya IP Voyager Bedienungsanleitung

Raytheon

Raytheon NautoPilot NP 5100 Bedienungsanleitung

Garmin

Garmin GPSMAP 8008 MFD Bedienungsanleitung

Iridium

Iridium Pilot Bedienungsanleitung

Beam

Beam Terra 800 Bedienungsanleitung

Sailmon

Sailmon E4 Bedienungsanleitung

AUTOHELM

AUTOHELM ST50 PLUS Bedienungsanleitung

ASTRO

ASTRO X-5 twin B Bedienungsanleitung

Garmin

Garmin GPS 16 Series Referenzhandbuch

Iridium

Iridium EXTREME Bedienungsanleitung

Satcube

Satcube Ku Bedienungsanleitung

Thuraya

Thuraya ATLAS IP+ Bedienungsanleitung

Radio Zeeland DMP

Radio Zeeland DMP Sigma 120 Bedienungsanleitung

METRACKCO

METRACKCO SVT600/T1/T3 Bedienungsanleitung

Garmin

Garmin GPSMAP 190-01120-00 Bedienungsanleitung

Thuraya

Thuraya SatSleeve Bedienungsanleitung

Humminbird

Humminbird 532162-1_B Bedienungsanleitung