Furuno FAR-3220Z Bedienungsanleitung

www.furuno.com

ll brand and product names are trademarks, registered trademarks or service marks of their respective holders.

Installation Manual

SURVEILLANCE RADAR

FAR-3220Z

IMPORTANT NOTICES.................................................................................................... i

SAFETY INSTRUCTIONS ............................................................................................... ii

SYSTEM CONFIGURATION .......................................................................................... iii

1. INSTALLATION.......................................................................................................1-1

1.1 Mounting Considerations ...................................................................................................1-1

1.2 How to Mount the Transceiver Unit....................................................................................1-1

2. WIRING....................................................................................................................2-1

2.1 Cabling Considerations......................................................................................................2-1

2.2 How to Fabricate Cables....................................................................................................2-2

2.3 How to Connect Cables .....................................................................................................2-3

2.4 Power ON/OFF ..................................................................................................................2-6

3. SETTINGS AND ADJUSTMENTS ..........................................................................3-1

3.1 How to Connect the Surveillance Radar for Settings and Adjustments .............................3-1

3.2 Settings from the PC(s)......................................................................................................3-2

3.3 Settings at Installation of the EC-3000...............................................................................3-2

3.4 How to Input Navigation Data ............................................................................................3-4

4. MAINTENANCE, SERVICE RELATED INFORMATION ........................................4-1

4.1 Parts Location ....................................................................................................................4-1

4.2 Jig, Tool .............................................................................................................................4-2

4.3 Wiring Caution ...................................................................................................................4-2

4.4 Cable Types.......................................................................................................................4-3

4.5 Periodic Replacement Parts ..............................................................................................4-3

4.6 Connection With the Transceiver Unit ...............................................................................4-3

SPECIFICATIONS ..................................................................................................... SP-1

OUTLINE DRAWING................................................................................................... D-1

INTERCONNECTION DIAGRAM ................................................................................ S-1

7KHSDSHUXVHGLQWKLVPDQXDO

LVHOHPHQWDOFKORULQHIUHH

࣭)85812$XWKRUL]HG'LVWULEXWRU'HDOHU

$VKLKDUDFKR

1LVKLQRPL\D-$3$1

$  6(3 



3ULQWHGLQ-DSDQ

$OOULJKWVUHVHUYHG

+  )(%  

3XE1R ,0(+

5()8  )$5:



Z: FEB. 14, 2018

Pub. No. IME-36670-Z

FAR-3220Z

IMPORTANT NOTICES

General

• This manual has been authored with simplified grammar, to meet the needs of international users.

• The operator of this equipment must read and follow the descriptions in this manual.

Wrong operation or maintenance can cancel the warranty or cause injury.

• Do not copy any part of this manual without written permission from FURUNO.

• If this manual is lost or worn, contact your dealer about replacement.

• The contents of this manual and equipment specifications can change without notice.

• The example screens (or illustrations) shown in this manual can be different from the screens you

see on your display. The screens you see depend on your system configuration and equipment

settings.

• Save this manual for future reference.

• Any modification of the equipment (including software) by persons not authorized by FURUNO will

cancel the warranty.

• The following concern acts as our importer in Europe, as defined in DECISION No 768/2008/EC.

- Name: FURUNO EUROPE B.V.

- Address: Ridderhaven 19B, 2984 BT Ridderkerk, The Netherlands

• All brand and product names are trademarks, registered trademarks or service marks of their

respective holders.

How to discard this product

Discard this product according to local regulations for the disposal of industrial waste. For disposal in

the USA, see the homepage of the Electronics Industries Alliance (http://www.eiae.org/) for the

correct method of disposal.

How to discard a used battery

Some FURUNO products have a battery(ies). To see if your product has a battery, see the chap-

ter on Maintenance. Follow the instructions below if a battery is used. Tape the + and - terminals

of battery before disposal to prevent fire, heat generation caused by short circuit.

In the European Union

The crossed-out trash can symbol indicates that all types of batteries

must not be discarded in standard trash, or at a trash site. Take the

used batteries to a battery collection site according to your national

legislation and the Batteries Directive 2006/66/EU.

In the USA

The Mobius loop symbol (three chasing arrows) indicates that

Ni-Cd and lead-acid rechargeable batteries must be recycled.

Take the used batteries to a battery collection site according to

local laws.

In the other countries

There are no international standards for the battery recycle symbol. The number of symbols can

increase when the other countries make their own recycle symbols in the future.

Ni-Cd Pb

SAFETY INSTRUCTIONS

Mandatory Action

Prohibitive Action

WARNING

Indicates a potentially hazardous situation which, if not avoided,

could result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation which, if not avoided,

can result in minor or moderate injury.

Warning, Caution

DANGER

Indicates a potentially hazardous situation which, if not avoided,

will result in death or serious injury.

The installer of the equipment must read the applicable safety instructions before attempting to install

the equipment.

Do not open the equipment

unless totally familiar with

electrical circuits and

service manual.

Only qualified personnel are

allowed to work inside the

equipment.

WARNING

ELECTRICAL

SHOCK

HAZARD

Turn off the power at the mains

switchboard before beginning the

installation.

Fire, electrical shock or serious injury

can result if the power is left on or is

applied while the equipment is being

installed.

Be sure that the power supply is

compatible with the voltage rating

of the equipment.

Connection of an incorrect power

supply can cause fire or damage the

equipment.

Use only the specified power

cable.

Fire or damage to the equipment can

result if a different cable is used.

Note: For more information, please refer to IMO

SN/Circ.271 “Guidelines for the installa-

tion of shipborne radar equipment.”

WARNING

Do not install the transceiver unit

in a dusty environment, orone

where the unit may get wet from

rain or water splash.

Dust or water in the units can result in

fire, electrical shock, or damage to

the equipment.

Attach protective earth securely to

the ship's body.

The protective earth (grounding) is

required for the AC power supply to

prevent electrical shock.

iii

SYSTEM CONFIGURATION

• Basic configuration is shown with solid line.

• Equipment shown with dotted lines are local supply.

Category of units

Antenna unit: Exposed to the weather

Other units: Protected from the weather

Note: For de-icer connection, use

RU-3305 (100/230 VAC 1ø, 50-60 Hz).

PROCESSOR

UNIT

(EC-3000)

100-115 VAC

220-230 VAC

1ø, 50-60 Hz

Radar Control Unit (RCU-025)

ANTENNA UNIT

(XN20AF-RSB103 or

XN24AF-RSB103)

TRANSCEIVER UNIT

(RTR-116)

DISPLAY UNIT

(MU-231)

100-230 VAC

1ø, 50-60 Hz

Waveguide

200/380 VAC

3ø, 50 Hz

RU-5893

100 VAC 3ø, 60 Hz

RU-6522

220 VAC 3ø, 50 Hz

RU-5466-1

440 VAC 3ø, 50 Hz

100-115 VAC

220-230 VAC

1ø, 50-60 Hz

POWER SUPPLY

UNIT

(PSU-007)

LAN

To Surveillance Radar

processor

SYSTEM CONFIGURATION

Program no.

xx: Minor change

The latest IHO standard can be found at http://www.iho.int

System Program no. Version no. Remarks

Antenna unit

SPU 0359407 01.xx

RF-Converter 0359414 01.xx

Processor unit (EC-3000)

Main 0359266 02.xx

1-1

1. INSTALLATION

1.1 Mounting Considerations

Keep in mind the following points when selecting a mounting location for the transceiv-

er unit.

• Locate the unit away from heat sources because of heat that can build up inside the

cabinet.

• Locate the unit away from places subject to water splash and rain.

• Leave sufficient space at the sides and rear of the unit to facilitate maintenance.

• Determine the location considering the length of the cable between the transceiver

unit and the antenna unit and the cable between the transceiver unit and the power

supply unit.

• Be sure to connect the ground wire (between the earth terminal on the chassis and

the ship’s earth).

1.2 How to Mount the Transceiver Unit

Fix the unit to the mounting location with M6 bolts or 6 coach screws. See the outline

drawing for mounting dimensions.

NOTICE

Do not apply paint, anti-corrosive sealant or contact

spray to coating or plastic parts of the equipment.

Those items contain organic solvents that can damage

coating and plastic parts, especially plastic connectors.

1. INSTALLATION

1-2

This page is intentionally left blank.

2-1

2. WIRING

2.1 Cabling Considerations

• To lessen the chance of picking up electrical interference, avoid where possible

routing the antenna cable (power and LAN) near other onboard electrical equipment

(radars, TX radio antennas, etc.). Also avoid running the cable in parallel with power

cables. When crossing with other cable, the angle must be 90° to minimize the mag-

netic field coupling.

• The antenna cable between the antenna and processor units is available in lengths

of 15 m and 30 m. Whatever length is used, it must be unbroken; namely, no splicing

allowed. The antenna cable should be as short as possible to minimize attenuation

of the signal.

• The radar must be connected to an emergency power source, as required by SO-

LAS II-1.

• The length of the USB cable must be within 5 m to prevent equipment trouble.

• The length of LAN cables must be within 50 m.

• Use a Cat5e or Cat6 LAN cable for the network if available locally.

• Make sure that the ground wires are connected between the ground terminals on

each equipment and the ship’s earth.

• Pass the cables through the specified clamp or locking wire saddle.

2. WIRING

2-2

2.2 How to Fabricate Cables

2.2.1 Antenna cable (TTYCYSLA-1)

2.2.2 Serial cable (TTYCYSLA-1Q)

2.2.3 LAN cable (FR-FTPC-CY)

Sheath

Pass the heat shrink tubing

(local supply) onto the drain

wire. Attach a crimp-on lug

(FV1.25-4(LF) RED) to

the wire.

Vinyl

tape

Crimp-on lug

Clamp sheath with

cable clamp.

100

Drain wire

450

Sheath

(1)

(2)

SheathSheath

Pass the heat shrink tubing

(local supply) onto the drain

wire, then attach a crimp-on

lug (FV1.25-4(LF) RED) to

the wire.

Crimp-on lug

100

Drain wire

450

SheathSheath

Vinyl

tape

Clamp sheath with

cable clamp.

SheathSheath

Armor

Heat shrink

tubing

Heat shrink

tubing

Flame retardent

vinyl sheath

Flame retardent

vinyl sheath

Flame retardent

vinyl sheath

(Set this part in

the cable clamp.)

Flame retardent

vinyl sheath

(Set this part in

the cable clamp.)

Vinyl sheathVinyl sheath

LAN connector w/shield

(equivalent to J00026A0165)

LAN connector w/shield

(equivalent to J00026A0165)

40 mm ±10 mm 700 mm

+20 mm, -0 mm

Inhaltsverzeichnis

Andere Furuno Radar Handbücher

Furuno

Furuno FAR-3210 Handbuch

Furuno

Furuno WR2120 Bedienungsanleitung

Furuno

Furuno DRS6A Bedienungsanleitung

Furuno

Furuno DRS6A-NXT Bedienungsanleitung

Furuno

Furuno DRS12AX X-Class Bedienungsanleitung

Furuno

Furuno FR-1500 MARK-3 Bedienungsanleitung

Furuno

Furuno FAR-3210 Bedienungsanleitung

Furuno

Furuno DRS4A Bedienungsanleitung

Furuno

Furuno FOIL-200 Bedienungsanleitung

Furuno

Furuno WR2120 Bedienungsanleitung

Furuno

Furuno WR-2100 Bedienungsanleitung

Furuno

Furuno FCR-1010 Bedienungsanleitung

Furuno

Furuno WR110 Bedienungsanleitung

Furuno

Furuno WR2120 Bedienungsanleitung

Furuno

Furuno WR110 Bedienungsanleitung

Furuno

Furuno FAR2137S/12 Bedienungsanleitung

Furuno

Furuno FAR-3210 Bedienungsanleitung

Furuno

Furuno FR-1908V-BB Bedienungsanleitung

Furuno

Furuno DRS4D-NXT Bedienungsanleitung

Furuno

Furuno DRS6A X-Class Bedienungsanleitung

Furuno

Furuno FR-2105 Bedienungsanleitung

Furuno

Furuno FAR-3230S-BB Bedienungsanleitung

Furuno

Furuno FR-1500 Bedienungsanleitung

Furuno

Furuno FCR-1030 Bedienungsanleitung

Beliebte Radar Handbücher anderer Marken

SAW D2L

SAW D2L Valentine One Gen2 Bedienungsanleitung

Raymarine

Raymarine Raytheon R20X Bedienungsanleitung

Simrad

Simrad CA34 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot FMR67B Technische Daten

Endress+Hauser

Endress+Hauser Levelflex M FMP45 Bedienungsanleitung

ECHOMAX

ECHOMAX Active-X-Band Bedienungsanleitung

AGD

AGD 340 Bedienungsanleitung

Kustom Signals

Kustom Signals Eagle 3 Bedienungsanleitung

SYMEO

SYMEO STU Bedienungsanleitung

Axis

Axis D2110-VE Bedienungsanleitung

MALA

MALA MIRA Bedienungsanleitung

Emerson

Emerson ROSEMOUNT 5300 Bedienungsanleitung

Rosemount

Rosemount 5300 Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex FMP56 Technische Daten

TERMA

TERMA SCANTER 5102 Bedienungsanleitung

GSSI

GSSI UtilityScan Bedienungsanleitung

Acconeer

Acconeer A111 Bedienungsanleitung

Crosley

Crosley CR37 Bedienungsanleitung