Fusion QM32469 Bedienungsanleitung

HANDI QUILTER 24-INCH LONGARM

USER MANUAL

QM32469 • VERSION 3.0

11/01/20142 | HQ Fusion User Manual www.HandiQuilter.com

Congratulaons on your purchase of the HQ Fusion

from Handi Quilter!

You haven’t just purchased a quilng machine,

you’ve joined the Handi Quilter family and we

welcome you.

Handi Quilter is commied to innovaon,

reliability, customer service and educaon.

Our machines are “Designed by a Quilter, for

Quilters®” and we are commied to your quilng

success.

With that in mind, we invite you to bookmark our

website: www.HandiQuilter.com and encourage

you to visit to learn more about the art of quilng.

We’ve posted ps, tricks and tutorials on subjects

as diverse as “Oiling Your Machine” to “Loading

a Quilt” to “Making Perfect Feathers”. We’ve got

videos to watch, pdf les to print out for reference

and forums for asking quesons.

Remember, if you ever have quesons, your local

Rep can help you. If the Rep is not available,

contact Handi Quilter directly at techsupport@

HandiQuilter.com or by calling us at

1-877-697-8458, Monday- Friday, 8-5 MST.

HQ Fusion Package 1 Contents

Please keep your original box and packaging

Contents of Package 1

1. Bobbins (5 pieces)

2. Needle (135x5) size 16

3. Needle (135x5) size 18

4. Bobbin Case

5. Thread Mast

6. Oiler

7. Power Cord

8. Hex Wrench

9. Memory Card Kit

10. Instruconal DVD

11. Instrucon Manual

12. HQ Fusion® Quilng Machine

Oponal Accessories

1. Micro Handles

2. Ruler Base

3. Horizontal Spool Pin

4. Groovy Board Stylus and Adaptor

5. HQ Pro-Stcher®

11/01/2014www.HandiQuilter.com HQ Fusion User Manual | 3

Table of Contents

Package Contents...........................................................................2

Safety Secon..............................................................................4

General Specicaons .......................................................................5

HQ Fusion Components (Front Side View). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

HQ Fusion Components (Back Side, Rear and Front Views) ........................................6

Installaon (Carriage) .......................................................................7

Installaon (Handlebars).....................................................................8

Installaon (Power Cord). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Inserng or Changing the Needle ............................................................11

Changing the Handi Feet....................................................................11

Installaon (Thread Mast)...................................................................12

Installaon (Laser Stylus) ...................................................................12

Laser Stylus Safety and Use Guidelines ........................................................13

Threading the Machine .....................................................................14

Oponal Horizontal Spool Pin................................................................15

Bobbin and Thread Tension Adjustments ......................................................15

Bobbin Tension............................................................................16

Easy-Set Tension...........................................................................17

Maintenance (Cleaning and Oiling) ...........................................................18

Using the Touch-Screen Displays .............................................................19

System Informaon ........................................................................27

Diagnoscs Tests ..........................................................................31

Using the Handlebar Buons ................................................................32

HQ Stch Regulator Operaon ...............................................................32

To Begin Quilng ..........................................................................32

Troubleshoong ...........................................................................33

Warranty Informaon ......................................................................39

Warranty Registraon Card..................................................................41

Installaon and Training Checklist ............................................................43

11/01/20144 | HQ Fusion User Manual www.HandiQuilter.com

Safety Secon

This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions: (1)

this device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operaon.

NOTE: Do not operate your HQ Fusion® quilng machine unl you have completely read the

informaon contained in this manual. Please keep all packaging and order informaon for warranty

purposes.

1. The HQ Fusion is very heavy. Never aempt to li it alone. Always use two people when liing.

2. Always unplug the HQ Fusion from the electrical outlet when performing any maintenance, changing

the needle, removing thread locks, or when le unaended.

3. Keep ngers away from all moving parts. Use cauon around the needle or sharp external components.

4. Change the needle oen. Do not use bent or dull needles.

5. Switch the power o when making any adjustments in the needle or bobbin area, such as threading the

needle, installing the bobbin case, or when oiling or cleaning.

6. Never drop or insert foreign objects into any opening.

7. The HQ Fusion should only be used indoors away from moisture.

8. The HQ Fusion should not be stored or used in extreme temperatures.

9. Use the HQ Fusion only for its intended use as described in this manual.

10. Use only aachments recommended by the manufacturer.

11. Use only the power cord set provided by Handi Quilter or a cered replacement set from Handi

Quilter.

12. To disconnect from the wall outlet, push the switch to the o posion, then remove the plug from

outlet pulling from the plug, not the cord. Never operate the HQ Fusion if the cord is damaged or not

working correctly. If a mechanical or electrical problem is encountered, return the HQ Fusion to the

nearest authorized service center or the manufacturer for examinaon, repair, electrical or mechanical

adjustment.

13. It is not recommended that the HQ Fusion Quilng Machine be used with any machine quilng frame

other than those recommended or manufactured by Handi Quilter.

14. This appliance is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilies, or lack of experience and knowledge, unless they have been given supervision or

instrucon concerning use of the appliance by a person responsible for their safety.

15. Children should be supervised to ensure that they do not play with the appliance.

Disclaimer

Handi Quilter and its Representaves are in no way legally responsible or liable for damage to the HQ

Fusion® when used improperly or not in accordance with the guidelines stated in this manual or when

used on machine quilng frames not recommended by Handi Quilter.

11/01/2014www.HandiQuilter.com HQ Fusion User Manual | 5

General Specicaons

Descripon Specicaon

Sewing Speed – Manual Mode 110 to 2,400 SPM

Sewing Speed – Regulated Mode 0 to Full Speed

Needle Bar Stroke 35.3 mm

Sewing Foot Stroke/Li 5 mm

Needle System 135x7 Standard 134 R Long Scarf

Needle Sizes 14/90 through 19/120

Lubricang Oil and Greases Kluber Lubricaon

Dimensions of Sewing Machine Throat 9.625 inches‖ x 24.00‖inches

Rate Voltage/Power Consumpon 90 to 264 Vac, 47 to 63 Hz, 400 Was

LED Lights 24 Was, 5 Vdc

Hook System Custom Manufactured, Rotary, Large Bobbin

Bobbin Type Class M

Motor Type Brushless DC

Automac Needle Posioning Up and down, full stch and half stch

HQ Fusion Components

Front Side Diagram A

1. Thread Mast

2. Thread Guide A

3. Thread Guide B

4. Three Hole Thread Guide C

5. Thread Guide D

6. Tension Assembly

7. Srup‖Thread Guide D

8. Take Up Lever

9. Thread Guide F

10. Front Casing/Frame

11. Back Hand Wheel

12. Front Hand Wheel

13. Side Laser Stylus Post Hole

Diagram A

11/01/20146 | HQ Fusion User Manual www.HandiQuilter.com

Back Side Diagram B

14. Handi Ruler Foot

15. Needle

16. Needle Bar Thread Guide

17. Needle Bar

18. Presser Bar

19. Needle Plate

20. Front Handle Serial Port

Connector

21. Ruler Base Posion Guides

22. Front Wheel Base

23. Wheels (4)

24. Back Casing/Frame

25. Rear Wheel Base

26. Front Threaded Handle Holes

27. Top Laser Stylus Post Hole

28. LED Light Rignt

29. Handi Foot Mount

Diagram B

Rear/Front Diagram C

30. Spool Pin 1

31. Electronic Control Pod

32. Laser Stylus Power Connector

33. Serial Port for Stch Regulator

34. Rear Handle Bar Serial Port

35. Rear Threaded Handle Holes

36. Accessory Power Outlet

37. Power Cord Connector

38. On/O Switch

39. Power Pod

40. Spool Pin 2

41. Micro Handle Mounng Bracket

42. Micro Handle Removable Plug

43. Bobbin Assembly

Diagram C

NOTE: Handi Quilter Geng Started DVDs are included with your HQ Fusion Machine. Review the

DVD and these instrucons to beer understand how to set up and use the HQ Fusion.

23 22

29 14

34 43

11/01/2014www.HandiQuilter.com HQ Fusion User Manual | 7

Installaon

1. Place the carriage on the table rails ensuring

that the Carriage Encoder Assembly will be

toward the back of the machine (the power

cord side of the machine).The back side of the

carriage has an encoder assembly aached

to the rear cross-piece. Be sure to place the

carriage on the frame correctly.

2. Place the machine on the carriage.

3. Plug the ribbon cable into the Carriage Encoder Assembly. The connector is keyed, so make sure the

keyed poron of the cable connector aligns with the keyed poron of the encoder connector.

4. The remaining length of cable comes back

under the Power Pod from the Rear Encoder

Assembly, behind the machine, and into the

9-pin serial port of the machine.

ÂIMPORTANT: If the machine is to be removed from the carriage, rst disconnect the cable from

the Carriage Encoder Assembly. The other two connectors on the cable should remain in place.

Failure to unplug the cable when removing the machine from the carriage could result in damage

to the cable, encoders, and carriage.

Installing the Front Handles

UCAUTION: Unplug the HQ Fusion from the electrical outlet. All power to the machine must be

turned o when installing the front handles. Failure to do so can result in damage to the machine.

DIrect excess cable

down into the carriage.

Fold cable back and

under the P-Pod.

11/01/20148 | HQ Fusion User Manual www.HandiQuilter.com

To install the front handles

1. Locate the three long bolts and the appropriate hex wrench. Tilt the screen forward.

2. Line up the holes on top of the handles with the pre-drilled holes on top of the machine.

3. Slide a single bolt into one of the holes unl it stops. Hand-ghten the bolt enough to secure the

handles to the top of the machine, but sll allow you to rotate the handles.

4. Secure the short 9-pin handlebar serial cable to the serial port (see diagram B, #20) on the back

casing of the machine.

NOTE: You may need to rotate the handle slightly to allow access to the nger screws.

5. Use the nger screws to ghten the 9-pin connector in posion. If necessary, a at screwdriver may

be used to gently secure the connector.

6. Rotate the handles back to their correct posion and insert and hand ghten the remaining two

handlebar bolts. Use the included 5 mm Hex wrench to securely fasten the handles to the front of

the machine.

Installing the Rear Handles

UCAUTION: Check that the HQ Fusion is unplugged from the electrical outlet. All power to the

machine must be turned o when installing the back handles. Failure to do so can result in damage

to the machine.

To install the rear handles

The rear handlebar comes mounted with three screws to the L-bracket.

1. Line up the two holes in the L- bracket with those on the rear of the machine. Slide the short bolts

into holes unl they stop. Hand ghten, and then use the Hex wrench to securely fasten the handles

to the back of the machine.

2. Once the two bolts are in place, plug the 9-pin connector into the serial port underneath the rear

handles (see diagram C, #32). Ensure the pins are lined up so they are not damaged when the plug is

pushed in. Push the plug securely in place.

ÂIMPORTANT: Aer the handles have been completely installed and plugged in, test them by turning

on the HQ Fusion. (You will not be able to turn on the machine unl the front handlebars have been

installed.) If nothing is displayed, press the display power buon on the top right of the touch-

screen display. If the display sll does not turn on, check that the handle bar cable on the side of

the machine is plugged in securely, that your machine is turned on, and that the power cord is

plugged into the machine as well as a power source.

11/01/2014www.HandiQuilter.com HQ Fusion User Manual | 9

Installing the Power Cord

Insert the cord into the top power connector on

the rear of the machine. Plug the three-prong end

into a power source. Aer inserng the power cord,

secure it with the metal retaining bale. Unlatch the

bale before removing the power cord.

NOTE: The lower power connector is for

powering other aachments developed by

Handi Quilter.

To turn on the machine

There are two power switches for your machine.

The main power switch is at the rear of the

machine and another power switch is at the front

of the machine below the right handlebar for

added convenience.

The machine is turned on when both switches are

turned on. The machine is turned o when both

switches are o. However, you may turn o the

machine funcons by turning o only the front

switch if you will be returning to quilng within

a day.

Turn on the back switch rst by toggling the switch

from the 0 posion to the 1 posion. Then turn on

the front switch by pressing. The front switch will

not turn on the machine unless the back switch is

already on.

Front power

switch

11/01/201410 | HQ Fusion User Manual www.HandiQuilter.com

ÂIMPORTANT: If you will not be using the machine for more than a day, we recommend you turn

o both switches and unplug the power cord from the power source.

ÂIMPORTANT: Refer to the safety instrucons.

Inserng or Changing the Needle

1. Move the needle bar to the highest posion by

turning the front or rear hand wheel or pressing

the needle up/down control on the handles.

Then turn o the power.

2. Loosen the needle-bar-clamp thumb-screw

3. With the scarf (small ground-out secon/dip

on the back side of the needle just above the

needle eye) facing toward the back hand-wheel

side of the machine, and the long groove down

the front of the needle facing the bobbin case

side, push the needle all the way up into the

needlebar, unl it can go no farther.

4. Carefully ghten the needle bar clamp screw.

UCAUTION: Over-ghtening the needle-clamp screw will result in damaged threads stripping the

hole. Stripped holes and damaged threads are not covered under warranty. Another side eect

of damaged threads is that the needle may be very ght when inserted up into the needle bar. To

avoid over ghtening the screw, nger ghten only.

NOTE: Changing the needle is recommended for each new quilt loaded on the machine or any

me the needle becomes bent, dull or burred.

UCAUTION: Check the needle to conrm it is fully inserted. The needle bar has a stop/sight hole

above the needle bar clamp screw. Make sure the needle is touching the top of the stop/sight

hole. If it is not, the machine ming will be o and it may be possible for the needle to collide

with internal parts causing damage not covered by warranty.

Inhaltsverzeichnis

Beliebte Nähmaschine Handbücher anderer Marken

Riccar

Riccar RL634DE Bedienungsanleitung

Pfaff

Pfaff 3307-1 SERIES Bedienungsanleitung

Siruba

Siruba C007JP Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Designer SE Bedienungsanleitung

Singer

Singer 148-5 Bedienungsanleitung

IKEA

IKEA SY Bedienungsanleitung

Pfaff

Pfaff 571 Bedienungsanleitung

Singer

Singer 15-91 Bedienungsanleitung

Brother

Brother BB370 Bedienungsanleitung

Pegasus

Pegasus WT100 Series Bedienungsanleitung

Reliable

Reliable 7100DB Bedienungsanleitung

Pfaff

Pfaff 937 Bedienungsanleitung

Singer

Singer 6038 Bedienungsanleitung

Singer

Singer 413K Bedienungsanleitung

Pfaff

Pfaff 1471 E1 Bedienungsanleitung

Kenmore

Kenmore 16677 - Serger Sewing Machine Bedienungsanleitung

HIGHLEAD

HIGHLEAD GC2008-M Bedienungsanleitung

Singer

Singer 400W4 Bedienungsanleitung