FUTABA T16IZ Installations- und Benutzerhandbuch

YourFutabaT16IZSUPERtransmitterprogrammingcanbeupdated

easilyonline.Whenfunctionsareaddedorimproved,theupdateﬁle

canbedownloadedfromourwebsite.Copytheupdatefilestothe

microSDcardandthenusethefollowingproceduretoupdatethe

program.CheckourwebsitefortheFAQregardingupdatingformore

information.

HowtoupdateT16IZSUPER

ŸƓƇƄƗƌƑƊŃƓƕƒƆƈƇƘƕƈ

Note: If the battery fully discharges during

program updating, updating will fail. When

the remaining battery capacity is 50% or

less, always recharge the battery before

updating.

Note: The model data in the transmitter can

be used unchanged after updating, but to

be safe, back up the model data before

updating.

1. Download the zip file of the update data

from our website.

([WUDFWWKH]LSÀOHRQ\RXUFRPSXWHU

3. The "FUTABA" folder will be created on your

computer.

4. Copy the "FUTABA" folder into your microSD

card.

Note: If the microSD card has already had

"another FUTABA" folder before you make a

copy, the "FUTABA" folder is OVERWRITTEN.

5. Insert the microSD card with "FUTABA" folder

that contained the update software into

the SD card slot on your T16IZ SUPER radio

transmitter.

6. Turn on the transmitter power while pressing

down the "HOME/EXIT" button. The update

screen appears on the LCD display of your

T16IZ SUPER and the software update is

started.

FutabaWEB

16IZSUPERUpdateZipﬁle

Download

Copythe"FUTABA"

folderintoyourSDcard.

InstalledmicroSDcard

oftheupdateﬁle

PresstheHOME/EXITswitchandturnon

Updating

7. When the software update is completed,

"Completed" message is shown on the LCD

display of your T16IZ SUPER. (Show below

picture.)

8. Turn off the power switch of your T16IZ SUPER

and remove the microSD card from the card

slot.

Possible Problems

When one of the error messages shown

below appears on the LCD screen your

T16IZ SUPER, the software update will not be

completed.

"Low battery."

Software update is postponed because

of low battery. Retry the software update

after the battery is recharged.

8SGDWHÀOHQRWIRXQG

7KH7,=683(5FDQQRWÀQGWKHXSGDWHÀOH

on the microSD card. Check to be sure all

the update files have been copied onto

the microSD card.

%URNHQÀOH

The T16IZ SUPER detects the update file

HUURU7KHXSGDWHÀOHPD\EHEURNHQRUIRU

another transmitter.

"Write error."

The software update procedure is stopped

for an unknown reason. Contact your local

service center when this error message

appears on the LCD screen of your T16IZ

SUPER.

Don't absolutely remove the battery

and the microSD card from the

transmitter during the update.

There is a possibility that the transmitter

will be damaged.

Recovering a failed update

If you failed to update for any reason, it

may transmitter will not start.

In that case, please update again

transmitter in the following procedure.

1. Detach the battery from the transmitter.

2. Insert the microSD card that contained

WKHXSGDWHÀOHVWRWKHWUDQVPLWWHU

3. Attach the battery to the transmitter

while pressing down the "HOME/EXIT"

button.

4. The update will start.

Even after the above steps, if the

transmitter fails to update or does not

start, please have it serviced.

Complete

1M23Z09110 T16IZSUPERSOFTWAREUPDATECHANGES

V4.0

Thissoftwareupdatesoraltersthefunctionsandfeaturesnotedbelow.Theinstructionsandinformationthatfollowaremeantasasupplementtotheoriginal

instructionmanualthataccompaniedtheT16IZStransmitter.Pleaserefertotheoriginalinstructionmanualwhereapplicable,butreplacethestepsindicatedbelow

withtheseinstructions.Pleasechecktoensurethattheupdatehasbeeninstalled.

1)SelecttheSystemMenu.

2)Touchthe[Information]button.

3)Conﬁrmthattheinformationinthedisplayindicatestheversionnumbersasnotedabove.

1.Receiversetting：ItisnowpossibletoconnectacompatiblereceivertotheS.I/Fportofthe

transmitterandconﬁgurethereceiversettings.

① ConnecttheS.BUS2portofthereceiverandtheS.I/Fportofthetransmitterwithacable.

② TurnonthepowerswitchwhilepressingtheU.MENU/MONbuttononthetransmitter.

③ Tap[Receiversetting]ontheSystemmenu.

Compatiblereceiversareasfollows.(AsofJanuary2024)

● R7208SB/R7308SB(Compatiblewithsoftwareversion2.0orlater)

● R7206SB/R7306SB

● R7214SB/R7314SB

SB2/RXport S.I/Fport

PresstheU.MENU/MONswitchandturnon

*For safety reasons, receiver settings

cannot be made while radio waves

are being transmitted.

④Tap[Read].

⑤ Thereceiversettingswillbedisplayed.Thedisplayedcontentsvarydependingonthemodel.

⑦Tap[Write].→ Receiversettingswillbechanged.

⑥ Makethenecessaryreceiver

settings.

⑧ Removethereceiverfromthetransmitter.

Changingreceiverchanneloutputmode

MODEA → MODEB → MODEC・・・MODEA

DualRXlinkmode

[OFF ⇔ ON]

[INH：TelemetryON]

[ACT：TelemetryOFF]

*T16IZScannotoperateafter17ch.

⑤Tap[Read].

⑥ TheDLPH-2settingswillbedisplayed.

⑦ ConﬁguretheDLPH-2.

① ConnectthepowersupplytotheBAT.1orBAT.2portofDLPH-2.

③ TurnonthepowerswitchofDLPH-2.

S.I/Fport

RX1port

*Whensettingmodeissetto[Airplanegyromode],PWMoutputmodeisﬁxedto[1-16CH+DG1,DG2].

*T16IZScannotoperateafter17ch.

DualRXmode→SingleRXmode→Airplanegyromode→DualRXmode→．．．

1-16CH+DG1,DG2 → 17-24CH+DG1,DG2 → 1-16CH+DG1,DG2 →．．．

Modeselection

2.DLPH-2setting：ItisnowpossibletoconnectaDLPH-2totheS.I/Fportofthetransmitterand

conﬁguretheDLPH-2settings.

② ConnecttheRX1portoftheDLPH-2andtheS.I/Fportofthetransmitterwithacable.

④ Tap[DLPH-2setting]ontheSystemmenu.

⑨ RemoveDLPH-2fromthetransmitter.

⑧Tap[Write].→ DLPH-2settingswillbechanged.

3.Addedswitchidentiﬁcationfunction：Onthehardwareselectionscreen,operatethedesired

toggleswitchanditwillbeautomaticallyselected.

① Tap[H/Wsetting]ontheSystemmenu.

④ Operatethetoggleswitch(eitherSAtoSH)toassign.

③ Callthe[Hardwareselect]screenfromthesettingsscreenforeachfunction.

② Setting[Switchidentiﬁcation]to[ON]enablestheswitchidentiﬁcationfunction.Setto[OFF]

todisabletheswitchidentiﬁcationfunction.

⑤ Theoperatedswitchisselected.SetsthecurrentswitchpositiontoON.Operatingtheswitchchangesthe

ONposition.

1.SwitchSounds:TheSoundselectfunctionaddssoundstoswitchpositions.

(OnlyEnglishsoundsaresupported.)

● Tapthe[SoundSelect]buttoninthelinkagemenutocallthesetupscreenshownat

theright.

● TakenoticeoftheSWLetterandposition

● Tapthedesiredswitchposition.

● Taponthedesiredsoundtoaddtherequestedsoundinthepreviouslyselected

switchposition.(Itwilldemothesoundoncepressed)

NOTE:Soundsandswitchpositionsdonotacknowledgeconditionpriority.

Soundsareintendedasareferenceforchangesinﬂightproﬁleandwillneedtobechanged

manuallyifprogrammingdeviatesfromprevioussetup.

V3.0

3.Telemetrysettings:AddedgearratiosettingbuttontoKontronikESCandScorpionESC.

4.Telemetrysettings:ChangedthemotorpolenumbersettingforeachESCto"100".

Previously,thenumberofpoleswasupto36,butnowitcanbesetupto100.

ŏ(QWHUWKHQXPEHURI

poles for your motor.

ŏ,IWKHJHDULVGRZQHQWHUWKHJHDUUDWLRWRGLVSOD\WKHKHOLFRSWHU

rotor speed and the airplane gear down propeller speed.

2.Soundnotiﬁcation:Itispossibletonotifytheoperatingstatusofthetransmitterbyvoice,such

asON/OFFofvariousmixingfunctions.

(OnlyEnglishsoundsaresupported.)

● Tapthe[WarningSetting]buttoninthelinkagemenutocallupthewarningsettings

screen.

● Displaythesecondpageandcallupthesettingsscreenbelow.

● Tapthe[Soundnotification]settingbuttontoturnthesoundnotificationfunction

ON/OFF.

● IfyousetthesoundnotiﬁcationfunctiontoON,youwillbenotiﬁedbyvoicewhenthe

ON/OFFstatusorconditionofvariousmixingfunctionschanges.

NOTE:Conditionaudionotiﬁcationsusestandardconditionnames.Pleasenotethatifyouchange

theconditionnameorrearrangethepriorityorder,theaudionotiﬁcationanddisplaywillno

longermatch.

1.Receiverorgyroupdates

ByconnectingareceiverorgyrothatsupportsupdatestotheS.I/Fconnectorofthetransmitter,itispossibletoupdatetheirsoftware.

① DownloadtheupdateﬁleoftheupdatedatafromFutabawebsite.

② Extracttheupdateﬁleonyourcomputer.The"FUTABA"folderwillbecreatedonyourcomputer.

③ Copythe"FUTABA"folderintoyourmicroSDcard.

④ InsertthemicroSDcardwith"FUTABA"folderthatcontainedtheupdatesoftwareintotheSDcardslotonyourtransmitter.

⑤ Turnonthetransmitterandcall"SystemMenu"⇒"Update".

⑥ Selecttheproducttoupdate.

*ConventionalServoUpdateandSensorUpdatescreensopenfromthisscreen.

⑦ Selecttheproductnametoupdate.

V2.0

V2.1

1.BugﬁxforEuropeanT16IZSUPER[ForEuropeonly]

FixedanissuewherecommunicationbecameunstablewhenoperatinganothertransmitteratashortdistancewhenusingtheT16IZSUPER

soldintheEuropeanregion.ThisproblemisONLYwhenyouuseT16IZSUPERunderS-FHSSmode.

*T16IZSUPERsoldoutsideEuropedoesnothavetheaboveproblem.Also,T16IZdoesnothavetheaboveproblem.

Andere Handbücher für T16IZ

Andere FUTABA Fernbedienung Handbücher

FUTABA

FUTABA Magnum Sport FP-S148 Bedienungsanleitung

FUTABA

FUTABA 7CAP Bedienungsanleitung

FUTABA

FUTABA Mega Tech 3PK Bedienungsanleitung

FUTABA

FUTABA ATTACK Bedienungsanleitung

FUTABA

FUTABA 6k Bedienungsanleitung

FUTABA

FUTABA 7C - Bedienungsanleitung

FUTABA

FUTABA R7314SB Bedienungsanleitung

FUTABA

FUTABA SKYSPORT-6H Bedienungsanleitung

FUTABA

FUTABA 2PL Bedienungsanleitung

FUTABA

FUTABA FP-8SSHP Bedienungsanleitung

FUTABA

FUTABA 1M23N20718 Bedienungsanleitung

FUTABA

FUTABA FX-20 Bedienungsanleitung

FUTABA

FUTABA FDLS-1 Bedienungsanleitung

FUTABA

FUTABA 9VAP Bedienungsanleitung

FUTABA

FUTABA 8FG Bedienungsanleitung

FUTABA

FUTABA 16IZS Montageanleitung

FUTABA

FUTABA T32MZ Bedienungsanleitung

FUTABA

FUTABA FX-36 Montageanleitung

FUTABA

FUTABA FP-G134 Bedienungsanleitung

FUTABA

FUTABA FP-2PB Bedienungsanleitung

FUTABA

FUTABA 4PK-2.4GHZ Bedienungsanleitung

FUTABA

FUTABA GYA460 Bedienungsanleitung

FUTABA

FUTABA FASSTest-2.4GHz T16SZ Series Bedienungsanleitung

FUTABA

FUTABA FP-4DN Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung