GardePro A3S Bedienungsanleitung
A3S TRAIL CAMERA
INSTRUCTION MANUAL
V3.8
Congratulations on your purchase of one of the best
trail cameras on the market! We appreciate your
business and want to earn your trust. Please refer to the
notes below and the instructions in this manual to
ensure that you are completely satisfied with this
product.
In case of any further questions or concerns, please get
in touch with us at:
support@zopudt.com
or visit our page (for FAQs or latest firmware):
www.zopudt.com
TABLE OF CONTENTS
1. IN THE BOX ..................................................................... 1
2. IMPORTANT NOTE .........................................................1
3. INTRODUCTION ............................................................. 1
3.1. ABOUT THE CAMERA .........................................1
3.2. MAIN FEATURES ................................................. 2
4. PARTS AND CONTROLS ............................................... 3
5. INSTALLING THE BATTERIES AND SD CARD .........6
5.1. LOADING BATTERIES .........................................6
5.2. INSERTING THE SD CARD ................................. 7
6. USING THE CAMERA .....................................................7
7. THE OFF, ON, AND SET MODES .................................. 8
7.1. OFF MODE ...........................................................8
7.2. ON MODE ............................................................. 9
7.3. SET MODE ............................................................9
8. ADVANCED SETTINGS ............................................... 10
9. MOUNTING AND POSITIONING THE CAMERA ..... 16
9.1. MOUNTING ........................................................ 16
9.2. SENSING ANGLE AND DISTANCE TEST .........17
9.3. SWITCHING ON THE CAMERA ........................18
10. REVIEW PHOTOS OR VIDEOS ................................. 20
11. TECHNICAL SPECIFICATIONS ................................ 21
12. TROUBLESHOOTING .................................................23
13. WARRANTY .................................................................24
1
1. IN THE BOX
1 x Camera, 1 x Mounting Strap,
1 x Instruction Manual, 1 x Mini USB Cord
Note: Memory card and batteries are not included (user supplied).
2. IMPORTANT NOTE
Require eight (8) 1.5V AA Alkaline or Lithium batteries. We
recommend the use of Energizer AA Lithium batteries in this
camera to obtain maximum battery life.
Do not mix old and new batteries. Do not mix battery type.
Rechargeable NiMH AA batteries can be used, but the lower
voltage (generally 1.2V) they produce has short lifetime, you
may have to replace them frequently.
Remove batteries when the camera is NOT in use.
Require a standard-size SDHC/SDXC memory card (maximum
capacity 512GB, Class 10). We recommend using SanDisk
32GB SDHC Class 10 memory cards in the camera to obtain
the best cost-performance.
Before first use, please format your SD card in the camera
by using "Format SD Card" in the menu settings.
3. INTRODUCTION
3.1. ABOUT THE CAMERA
The GardePro A3S trail camera is a new generation of digital
scouting camera, it can be triggered by any movement of game
in a location, detected by a highly sensitive Passive Infra-Red
(PIR) motion sensor, and then take high quality pictures (up to
48MP still photos), 1296P 20fps or 1080P 30fps H.264 video
2
clips with audio.
The camera features the all new innovative and ultra-clear Sony
imaging technology. The camera encompasses all-new software
innovations, smart illumination technology, blur reduction
technology, auto noise reduction and dynamic exposure
technology to deliver high resolution image quality, multi-zone
detection, pre-activated technology and fast boot to deliver 0.1s
fast trigger speed and 0.5s recovery time. The camera consumes
very little power (less than 0.1mA) in a stand-by (surveillance)
state. It can deliver 8 months of standby operation time when
the device is powered by eight AA 1.5V batteries.
3.2. MAIN FEATURES
High quality pictures (up to 48MP still photos), 1296P or
1080P HD video clips with audio. The camera is equipped
with a Sony Starvis sensor, premium f/1.6 great aperture lens
and has exclusive imaging optimization algorithm; it can
take clear photos or videos even at low light or dark
environment.
Clear night vision, flash range 100ft. (30m). The camera is
equipped with 36pcs high performance infrared no glow
940nm LEDs that function as a flash (invisible to human and
animal eyes).
Easy to use/program with well-designed operation buttons
and built-in 2.4-inch LCD color screen, easy to review
pictures and videos on the screen.
3 working modes - Motion detection, Time lapse and Hybrid.
Fast trigger time approx. 0.1~0.5 seconds (pre-activated
technology with 3 PIR sensors designed), Fast recovery time
of less than 0.5 seconds, Long trigger distance up to 90ft.
(27m).
Info strip on each capture: Date, Time, Temperature & Moon
Phase.
3
Operation Hours, Loop Recording, Time Lapse, Password
Protected.
Built for any climate - IP66 Waterproof designed for outdoor
use and resistant against rain and snow. Operation
Temperature -4~140°F (-20 ~ 60°C).
Support SD/SDHC/SDXC memory card, maximum capacity
512GB (not included).
4. PARTS AND CONTROLS
The camera is equipped with 36pcs built-in high efficiency
infrared LEDs, LED Indicators, Optical Lens, PIR Sensors,
Lock Holes in front view (Figure 1).
TIP: During use, the black PIR Lens may be dirty or have
scratches, however it does not affect the performance due to the
reliability design. If you must clean it, please try to blow it off
or pick out the dirt very lightly. Please do not try to wipe it,
which may cause more scratches.
Figure 1: Front View
IR LEDs
Lock Hole
Side PIR
Motion Sensor
Optical
Lens
Center PIR
Motion Sensor
Side PIR
Motion Sensor
Light Sensor
Indicator
Microphone
4
The camera provides the following connections for external
devices: Mini USB port and SD card slot etc. (Figure 2).
Figure 2: Bottom View
The camera has two strap holes on the back. The strap can be
put through the strap holes and fastened securely around the tree
trunk by pulling the end of the strap firmly (Figure 3).
Figure 3: Back View
The camera has a 2.4-inch built-in LCD screen, which can be
used for reviewing pictures or videos and menu displaying, and
unique keypad design for easy program and operation, 8 AA
batteries slot supported (Figure 4).
Tripod Base
1/4" - 20
SD Card
Holder
DC 12V/1A
Plug 4.0x1.7mm
Strap Hole
Lock
Buckle
Mini USB Port
5
Figure 4: Inside View
Figure 5: Operation Buttons and Shortcut
A 3-way power switch is used to select the main operating
modes: OFF,ON,and SET (Figure 5).
A control key interface with six keys is primarily used in SET
mode to select operational functions and parameters. As shown
in Figure.5, the keys can also perform a second function
(shortcut operations in SET mode) in addition to their main
function.
5. INSTALLING THE BATTERIES AND SD CARD
Before you start learning how to use your camera, you will first
need to install a set of batteries and insert an SD card. Although
that may only take you a minute, there are some important notes
RIGHT Key as
Manual Shutter
("SHOT")
DOWN Key as
Camera Mode
OK Key as
Playback Mode
Power Switch
Color
Screen
Battery
Compartment
and Cover
Operation
Buttons
UP Key as
Video Mode
6
about both batteries and SD cards you should be aware of, so
please take the time to read the following directions and
cautions:
5.1. LOADING BATTERIES
After opening the cover of the battery compartment, you will
see that the camera has eight battery slots (Figure 6). A full
eight batteries must be installed for the camera to operate. Be
sure to insert each battery with correct polarity (negative or
"flat" end against the long spring of each battery slot).
In the SET mode when battery power level gets low, the
message "Low Battery" will show on the screen, please replace
the batteries. If the battery indicator shows in RED, this does
mean the batteries are not able to drive IR LEDs flash at night,
however the batteries still work at daytime until "Low Battery".
If you want to continue night vision, please replace the
batteries.
Figure 6: Loading the Batteries
5.2. INSERTING THE SD CARD
Insert the SD card (with the camera's power switch in the OFF
position) before beginning to operate the camera. Don't insert or
一
7
remove the SD card when the power switch is in the ON or
SET position. The camera uses a standard-size memory card to
save photos (in .jpg format) and/or videos (in .mp4 format). SD
and SDHC (High Capacity)/SDXC cards up to a maximum
512GB capacity are supported (Figure 7).
Figure 7: Inserting the SD Card
The following describes how to insert and remove the SD card:
Insert the SD card into the card slot with its label side
upwards.A "click" sound indicates that the card is installed
successfully. If the wrong side of the card is facing up, you
will not be able to insert it without force, there is only one
correct way to insert cards. If the SD card is not installed
correctly, the device will not display an SD card icon on the
screen in SET mode.Formatting the SD card by using the
camera's "Format" parameter in the menu settings before
using it for the first time is recommended, especially when a
card has been used in other devices.
To take out the SD card, just gently push in the card (do not
try to pull it out without pushing in first). The card is
released from the slot and ready to be removed when you
hear the click. Be sure the camera's power is switched OFF
before inserting or removing SD cards or batteries.
6. USING THE CAMERA
Once you've prepared your camera by properly installing
Inhaltsverzeichnis
Andere GardePro Scouting-Kamera Handbücher
GardePro
GardePro A5 Bedienungsanleitung
GardePro
GardePro A252 Bedienungsanleitung
GardePro
GardePro E8P Bedienungsanleitung
GardePro
GardePro E6 Bedienungsanleitung
GardePro
GardePro X60P Bedienungsanleitung
GardePro
GardePro A3 Bedienungsanleitung
GardePro
GardePro A323 Bedienungsanleitung
GardePro
GardePro A262 Bedienungsanleitung
