Garmin Cessna Caravan G1000 Handbuch

G1000

multi function display

pilot’s guide for Cessna Nav III

Garmin G1000 MFD Pilot’s Guide for Cessna Nav III 190-00392-02 Rev. A

Record of Revisions

Revision Date of Revision Revision Page Range Description

A 12/15/04 8-1 – 8-163 Initial release.

Garmin G1000 MFD Pilot’s Guide for Cessna Nav III190-00392-02 Rev. A 8A-1

INTRODUCTION

8A.1 INTRODUCTION

This G1000 Pilot’s Guide describes and explains

the operation of the Multi Function Display (MFD) as

installed in Cessna Nav III aircraft.

DESCRIPTION

The display portion of the G1000 Integrated Cockpit

System installed in Cessna Nav III aircraft consists of two

10.4-inch liquid crystal displays (LCDs). During normal

operation, the right display is conﬁgured as the Multi

Function Display (MFD).

OPTIONAL INTERFACES

The following optional interfaces are described in

the G1000 Multi Function Display Optional Interface

Addendum, P/N 190-00470-00:

Figure 8A.1.1 MFD Power-up Page

System Software

Number

• L-3 STORMSCOPE® WX-500 Series II Weather

Mapping Sensor

• L-3 SKYWATCH® Trafﬁc Advisory System (Model

SKY497)

• L-3 SKYWATCH® HP Trafﬁc Advisory System

(Model SKY899)

• Honeywell® KTA870 TAS/KMH880 Multi-Hazard

Awareness System

• Ryan TCAD 9900B and 9900BX

• GDL 69/69A XM® Radio System

NOTE: All visual depictions contained within this

MFD Pilot’s Guide, including screen images of the

G1000 panel and displays, are subject to change

and may not reﬂect the most current G1000

system software. Depictions of equipment may

differ slightly from the actual equipment.

MFD POWER-UP

See the G1000 System Overview Pilot’s Guide for system

power-up information.

Garmin G1000 MFD Pilot’s Guide for Cessna Nav III 190-00392-02 Rev. A

8A-2

INTRODUCTION

Power-up Page Information

The Power-up Page displays general system information

such as software version and database versions to the pilot

upon power-up of the G1000 system. The Power-up Page

displays the following data:

• Product name

• System software version number

• Copyright string

• Company name

• Company web page

• Company latitude and longitude location

• Checklist ﬁlename and copyright information or text

indicating that no checklist ﬁle is present

• Land database name, version, copyright informa-

tion, and warning information if land database is

present; otherwise, if no land database is present,

text indicating that no land database is present

• Terrain database name, version, copyright informa-

tion, and warning information if terrain database is

present; otherwise, if no terrain database is present,

text indicating that no terrain database is present

• Aviation database name, version, effective dates, and

otherwise, if no aviation database is present, text

indicating that no aviation database is present

• If the aviation database is out of date, text that states

the aviation database is out of date

• If the airframe allows pilot created pilot proﬁles then

the active proﬁle is displayed

• Obstacle database name, version, copyright informa-

tion, and warning information if obstacle database

is present; otherwise, if no obstacle database is

present, text indicating that no obstacle database is

present.

Power-up Page Operations

The pilot can change the active proﬁle (see System

Setup Section). To acknowledge the Power up Page

information and proceed to the Navigation Map Page

press the ENT key or the rightmost softkey twice.

MFD BACKLIGHTING

See the Primary Flight Display Pilot’s Guide for

instructions on adjusting MFD backlighting.

MFD SOFTKEYS

The MFD softkeys are located below the display screen

and provide control over ﬂight management functions

including GPS and NAV management, engine and airframe

monitoring, terrain, and trafﬁc. Figure 8.1.3 shows an

MFD ﬂowchart identifying what functions are available

via the softkey labels.

The MFD softkeys perform the following functions:

ENGINE – Pressing the ENGINE softkey makes

available the LEAN and SYSTEM softkeys which

in turn access the Lean Page and the System Page,

respectively.

MAP – pressing the MAP softkey enables the follow-

ing softkeys:

TRAFFIC – pressing the TRAFFIC softkey

displays/removes Mode S Trafﬁc on the

Navigation Map.

TOPO – pressing the TOPO softkey displays

or removes topographic information on the

Navigation Map.

TERRAIN – pressing the TERRAIN softkey

displays/removes terrain information on

the Navigation Map.

BACK – pressing the BACK softkey displays

the ENGINE and MAP top level softkeys.

Garmin G1000 MFD Pilot’s Guide for Cessna Nav III190-00392-02 Rev. A 8A-3

INTRODUCTION

DCLTR (declutter) – pressing the DCLTR softkey

removes map information in three levels.

CHKLIST (checklist) – pressing the CHKLIST

softkey displays the Checklist Page.

ELECTRONIC CHECKLISTS

The G1000 Multi Function Display installed in the

Cessna Nav III provides checklists which allow a pilot

to quickly ﬁnd the proper procedure on the ground and

during each phase of ﬂight.

NOTE: The checklist information described in this

section is not intended to replace the checklist

information described in the Nav III Information

Manual and the Pilot Safety and Warning Supple-

ments document.

NOTE: Garmin is not responsible for the content

of the checklists. User-deﬁned checlists are cre-

ated by the aircraft manuafacturer. Additionally,

modiﬁcations or updates to the checklists are

corrdinated through the aircraft manaufacturer.

The user cannot edit the checklists.

Displaying the Checklist Page

The Power-up Page displays the current checklist ﬁle

that is installed for the NAV III aircraft. If no checklist

is present, then the Power Up Page displays the text

“CHECKLIST FILE NOT PRESENT” and the CHKLIST

softkey is greyed out.

To select the Checklist Page:

1. From any page, press the

CHKLIST

softkey.

Selecting a Procedure Group

Depending on the speciﬁc airframe, there are a certian

number of groups of procedures with their respective

checklists available to the pilot.

To select a procedure group:

1. Press the

CHKLIST

softkey.

2. Turn the

large FMS

knob to select the ‘GROUP’

ﬁeld.

3. Turn the

small FMS

knob to select the desired

procedure and press the

ENT

key.

Selecting a Checklist within the Procedure

Group

1. Turn the

large FMS

knob to select the ‘Checklist’

ﬁeld.

2. Turn the

large or small FMS

knob to select the

desired checklist and press the

ENT

key.

Selecting a Checklist Item

Two methods are available to select a checklist item: (1)

pressing the ENT key; or (2) pressing the DONE softkey.

(1) Pressing the ENT key:

With the desired checklist displayed, turn the large

or small FMS knob to move up and down the checklist

and highlight an item with a hollow white rectangle. The

default color for non-selected checklist items is blue and

once the item is highlighted, the color turns white. To

select a checklist item that is highlighted, press the ENT

key. The selected item turns green in color again for ease

of identiﬁcation, and then a checkmark is placed in the

box next to the item. As an item is selected, the next item

is automatically highlighted for selection. (2) Pressing the

DONE Softkey: Pressing the DONE softkey produces the

same results as pressing the ENT key.

Garmin G1000 MFD Pilot’s Guide for Cessna Nav III 190-00392-02 Rev. A

8A-4

INTRODUCTION

NOTE: All warnings are displayed in yellow for

ease of identiﬁcation.

Removing the Checkmark from a Checklist

Item

Press the CLR key to remove a checkmark from an

item.

Advancing to the Next Checklist

Once the last item in a checklist is selected, the ‘GO

TO THE NEXT CHECKLIST?’ text is highlighted. Press

the ENT key to advance to the next checklist displayed.

One-Button Access to Emergency Procedures

The EMERGENCY softkey is available at all times when

the checklist page is displayed. Press the EMERGENCY

softkey at any time to immediately access the emergency

procedures.

Exiting the Checklist Page

The EXIT softkey is available as long as the Checklist

Page is displayed. Press the EXIT softkey or momentarily

hold down the CLR key at anytime to exit the Checklist

Page and return to the last page that was displayed before

the Checklist Page was selected.

Checklist Group

Checklist Page

Softkeys

Checklist Number

Checklist Page

Indicator

Figure 8A.1.2 Checklist Page

Emergency

Softkey

Garmin G1000 MFD Pilot’s Guide for Cessna Nav III190-00392-02 Rev. A 8A-5

INTRODUCTION

Figure 8A.1.3 MFD Softkeys

BACK

RST USED

SYSTEM

ENGINE

LEAN

ENGINE

MAP

DCLTR

BACK

SYSTEM

LEAN

ENGINE

LEAN

BACK

SYSTEM

Press the ENGINE softkey on any level to

return to the LEAN and SYSTEM softkey level

TRAFFIC

TOPO

BACK

TERRAIN

DCLTR-2

DCLTR-3

DCLTR-1

Press the BACK softkey on this level to

return to the top softkey level

Press the BACK softkey on this level to

return to the top softkey level

Press the BACK softkey on this level to

return to the top softkey level

Press the BACK softkey on this level to

return to the top softkey level

CHKLIST

ASSIST

CYL SLCT

EXIT

EMERGCY

ENGINE

DCLTR

MAP

ENGINE

CHKLIST

CLR

DONE

The DONE softkey changes to UNDO when the checklist

item is already checked

Garmin G1000 MFD Pilot’s Guide for Cessna Nav III 190-00392-02 Rev. A

8A-6

INTRODUCTION

MFD PAGE GROUPS

The MFD displays GPS/Navigation ﬂight information

in four main page groups:

• Map (MAP):

Navigation Map Page

Trafﬁc Map Page

Terrain Proximity Page

• Waypoint (WPT) :

Airport Information Page

Intersection Information Page

NDB Information Page

VOR Information Page

User Waypoint Information Page

• Auxiliary (AUX):

Trip Planning Page

Utility Page

GPS Status Page

System Setup Page

System Status Page

• Nearest (NRST):

Nearest Airports Page

Nearest Intersections Page

Nearest NDB Page

Nearest VOR Page

Nearest User Waypoints Page

Nearest Frequencies Page

Neatest Airspaces Page

To select a speciﬁc page group:

1. Turn the

large FMS

knob until the desired page

group is selected.

Active Page group is

highlighted

Currently

selected page is

highlighted

Figure 8A.1.4 Page Group Window

To select a different page within the group:

1. Turn the

small right

FMS

knob. As the knob is

turned, the bottom right corner of each page

indicates the page group that is currently being

displayed (e.g., MAP or NRST, etc.), the number

of pages available within that group (indicated

by rectangle icons) and the placement of the

current page within that group (indicated by a

solid cyan rectangle icon). The page group and

active page title window are displayed below

the status bar.

Page Group Active Page Title

Figure 8A.1.5 Page Title Window

Garmin G1000 MFD Pilot’s Guide for Cessna Nav III190-00392-02 Rev. A 8A-7

INTRODUCTION

WORKING WITH MENUS

Much of the operation of the G1000 MFD is

accomplished using a menu interface. The G1000 has

a bezel-mounted dedicated menu key (MENU) when

pressed, displays a context-sensitive list of options. This

options list allows the pilot to access additional features

or make settings changes which speciﬁcally relate to the

currently displayed page. Some menus provide access to

additional submenus that are used to view, edit, select,

and review options. Some menus display ‘NO OPTIONS’

when there are no options for the page selected.

The main keys which are used in association with all

page group operations are listed below:

• CLR – erases information or cancels an entry.

Press and hold CLR to immediately display the

Navigation Map Page, regardless of the page

currently displayed.

• ENT – accepts a menu selection or data entry.

Approves an operation or completes data entry.

Also conﬁrms information.

• BACK – resets the MFD softkeys to their default

settings (ENGINE, MAP, DCLTR, MODE, VIEW,

etc).

• DCLTR – removes information from the moving

map in a progressive manner with each key-press.

• MENU – displays a context-sensitive list of

options that allows access to additional features or

that allows the pilot to change the settings which

relate to the currently displayed page.

NOTE: Data is entered using the large and small

FMS knob. Practice with them to become efﬁ-

cient at entering data. This will greatly reduce

the amount time spent operating the MFD in

ﬂight.

If there are more options than can be displayed turn

the small or large FMS knob to scroll through the list to

identify them. In all cases, once the menu is displayed the

small or large FMS knob is turned to highlight an item

and the ENT key is pressed to select that item or the CLR

key removes the menu and cancels the operation. Press-

ing the softkeys does not display a menu or submenu.

Figure 8A.1.6 Menu with Options

Figure 8A.1.7 Menu with No Options

Garmin G1000 MFD Pilot’s Guide for Cessna Nav III 190-00392-02 Rev. A

8A-8

INTRODUCTION

This page intentionally left blank.

Andere Handbücher für Cessna Caravan G1000

Inhaltsverzeichnis

Andere Garmin Avionik-Display Handbücher

Garmin

Garmin Cessna Caravan G1000 Bedienungsanleitung

Garmin

Garmin G1000 Diamond DA42NG Handbuch

Garmin

Garmin G1000 NAV III Bedienungsanleitung

Garmin

Garmin GTN 625 Bedienungsanleitung

Garmin

Garmin Cessna Caravan G1000 Bedienungsanleitung

Garmin

Garmin G600 Handbuch

Garmin

Garmin G600 Handbuch

Garmin

Garmin Cessna Caravan G1000 Handbuch

Garmin

Garmin GTN 6XX Bedienungsanleitung

Garmin

Garmin G1000H Handbuch

Garmin

Garmin Cirrus Perspective SR20 Handbuch

Garmin

Garmin Cessna Caravan G1000 Bedienungsanleitung

Garmin

Garmin Approach G5 - GPS-Enabled Golf Handheld Bedienungsanleitung

Garmin

Garmin Cessna Caravan G1000 Handbuch

Garmin

Garmin GTN 625 Konfigurationshandbuch

Garmin

Garmin Cessna Caravan G1000 Konfigurationshandbuch

Garmin

Garmin G1000:Socata Handbuch

Garmin

Garmin Cessna Caravan G1000 Bedienungsanleitung

Garmin

Garmin Approach G5 - GPS-Enabled Golf Handheld Bedienungsanleitung

Garmin

Garmin GTS 8 Series Bedienungsanleitung

Garmin

Garmin GIA 6300 Service-Handbuch

Garmin

Garmin Approach G5 - GPS-Enabled Golf Handheld Bedienungsanleitung

Garmin

Garmin GTN 635 Bedienungsanleitung

Garmin

Garmin G3000 Bedienungsanleitung

Beliebte Avionik-Display Handbücher anderer Marken

Smart Avionics

Smart Avionics PB-4 Bedienungsanleitung

Midcontinent

Midcontinent SAM MD302 Handbuch

MGL Avionics

MGL Avionics Stratomaster Maxi Single FF-3 Bedienungsanleitung

Mid-Continent Instruments

Mid-Continent Instruments 4300 Series Handbuch

Avidyne

Avidyne 700-00182 Series Service-Handbuch

Flybox

Flybox Oblo Bedienungsanleitung

SANDIA aerospace

SANDIA aerospace SAFE 328 Bedienungsanleitung

Lynx

Lynx Micro System Bedienungsanleitung

SAC

SAC SA100 Bedienungsanleitung

Avidyne

Avidyne Entegra Handbuch

Dynon

Dynon SkyView HDX System Technisches Dokument

Barco

Barco MDU-254 Bedienungsanleitung

PROXALERT

PROXALERT R5 Handbuch

Aspen

Aspen Evolution EFD 1000 FDF Bedienungsanleitung

Avidyne

Avidyne IFD550 Handbuch

Aspen Avionics

Aspen Avionics Evolution 1000 Pro/VFR PFD Handbuch

uAvionix

uAvionix SkyEcho Bedienungsanleitung

Triadis

Triadis TR-DVS Handbuch