Garmin NTX54 Bedienungsanleitung

NTX54-Stand Alone

Stand Alone Garmin Navigation

NTV-KIT411/471

BHM

03/25/14

NTV-DOC109

rB2

3950 NW 120th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760

BHM

3/25/14

NTV-DOC109

rB2

Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for

misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is

intended for off-road use and passenger entertainment only.

2 | P a g e

Overview

Stand-Alone navigation powered by Garmin to add navigation to any OEM or aftermarket

screen (additional parts maybe required). The system provides composite or RGB video for

different screen designs. For more versatility, the system has an internal break to interrupt

audio and introduce navigation audio an existing speaker in the vehicle for a seamless

integration into the audio system. Currently this Garmin Navigation is controlled via the

included IR remote control.

Kit Contents

Required Tools

Stand Alone IR Module

NTV-ASY166

NTX54 Garmin

KIT411: NTV-NAV009

KIT471: NTV-NAV015

IR Remote

NTV-REM004

IR Eye

NTV-MIS038

GPS Antenna

NTV-NAV012

Power Harness

NTV-HAR230

External Speaker

NTV-HDW010

Strippers

Electrical Tape

Crimpers

NAV-Traffic Antenna

NTV-CAB063

NTV-KIT471 only

BHM

3/25/14

NTV-DOC109

rB2

Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for

misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is

intended for off-road use and passenger entertainment only.

3 | P a g e

Stand Alone IR Module Pin out

Garmin Navigation Pin out

Pin #

Description

Color

12v (+) Ignition

Red

MUTE out (-)

Pink

RX (IR)

White

RS (Garmin)

Green

AUDIO IN (+)

White

AUDIO OUT (+)

Gray

NAV Audio IN + (3.5mm)

White

Ground (-)

Black

Shield (IR)

-Shield-

TX (IR, 5v)

Red

TX (Garmin)

Blue

AUDIO IN (-)

White/Black

AUDIO OUT (-)

Gray/Black

NAV Audio IN –(3.5mm)

-Shield-

Pin #

Description

Color

Composite Video out

Yellow

RGB Shield

-Shield-

RGB Green Signal

Green

TX Signal

Blue

Speaker OUT (+)

Black

12v (+) ACC INPUT

Red

Composite Shield

-Shield-

RGB Blue Signal

Blue

RGB Red Signal

Red

RGB Sync Signal

White

RX Signal

Green

Speaker OUT (-)

Black

Ground (-) INPUT

Black

12v (+) Constant INPUT

Yellow

Wire Side

BHM

3/25/14

NTV-DOC109

rB2

Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for

misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is

intended for off-road use and passenger entertainment only.

4 | P a g e

Installation

1. Remove radio or display from the vehicle and set it aside.

2. From the provided Power Harness, connect the following wires to the car:

Stand Alone Wires

Connect to car

Black

Chassis Ground (-)

Red

12v ACC (+)

Yellow

12v Constant (+)

*Pink (mute)

Radio MUTE output wire (-)

**Gray

Existing Speaker + (speaker side)

**Gray/Black

Existing Speaker –(speaker side)

**White

Existing Speaker + (car side)

**White/Black

Existing Speaker –(car side)

3. Connect the video output from the stand alone harness to the display via either composite

(yellow RCA) or RGBS wires.

4. Connect the IR eye to the IR input plug, from the stand alone harness (mount eye in remote-

accessible location).

5. Mount the provided Navigation antenna on or in the dash where it has a clear

view of the sky. Mounting these antennas beneath plastic is usually

acceptable, however if there is any metal between the antenna and the sky

you will likely have connection issues. Run the plug end of the antenna back

to the Garmin navigation module and connect at the proper port.

6. If you purchased a NAV-TRAFFIC Garmin unit: Connect the plug from the provided Nav-

Traffic Antenna to the Garmin navigation module at the proper connector, and run the wire up

an A-Pillar or somewhere close to the outside of the vehicle. Try to keep this antenna as

stretched out as possible.

*Optional: Vehicle may not have a mute wire.

**Optional: Only connect if desired, only if vehicle has an existing center channel speaker

(see step 8)

BHM

3/25/14

NTV-DOC109

rB2

Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for

misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is

intended for off-road use and passenger entertainment only.

5 | P a g e

NAV Guidance Audio Options:

7. If using the provided External Speaker for NAV guidance audio, connect it straight to the

3.5mm female plug labeled ‘EXT SPKR’coming from the 24-pin Garmin NAV plug.

8. If using an existing center channel speaker for NAV

guidance audio:

A. Cut the signal lines (going to the speaker) in

half and connect the Gray, Gray/Black, White and

White/Black wires in. Refer to the chart on step 2 for

proper connection.

B. Connect the 3.5mm wire labeled ‘NAV

AUDIO IN’to the plug labeled ‘EXT SPKR’in order for

audio signal to pass through the IR module.

9. The pink wire labeled ‘MUTE’provides ground when

navigation audio is played back.

Stand Alone Garmin Operation

The Stand Alone Garmin system functions just like

any other Garmin navigation system, with the

exception that you must use the remote to control

what’s on screen (via the mounted IR eye).

If you’ve purchased the NAV-Traffic option, the

included antenna must be plugged in to the NAV-

Traffic port on the Garmin unit, and ran up inside the

dash, or A-pillar as far as possible to gain signal.

When in the map screen, to gain access to the NAV

Traffic options, you must press the ‘SET’ button on

the remote. To select ‘avoid’ (when it appears), use

the ‘MODE’button on the remote control.

NAV

Traffic

‘AVOID’

NAV Traffic

select

controls/

select

location

(on map)

BHM

3/25/14

NTV-DOC109

rB2

Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for

misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is

intended for off-road use and passenger entertainment only.

6 | P a g e

FAQs

1. q. My stand alone navigation doesn’t retain settings after the key is turned off.

1.a. Make certain the yellow wire is connected to a constant source of 12v.

2.q. I receive no GPS signal.

2.a. Make sure the GPS antenna is able to see the satellite by ensuring there is no

metal between the antenna and the sky (it can be mounted inside the dash, underneath

plastic is acceptable, but it cannot be mounted underneath metal).

3.q. I’ve acquired a NAV Traffic antenna, but I have no indication on screen that this Garmin has

NAV Traffic enabled.

3.a. You must order a Stand Alone/Garmin WITH NAV-Traffic (additional cost) from

Nav-TV in order to reap the benefits of live NAV-Traffic. The NTX54 with NAV-Traffic is a

separate module. Units without TMC are not field-upgradable. Contact us at 1-866-477-3336.

4.q. I do not hear any sound coming from the supplied speaker when NAV guidance is played

back.

4.a. Make certain the speaker signal cable is connected into the correct plug labeled

‘AUDIO’. Also, make sure the front of the mounted speaker is not being blocked or muffled in

any way.

5.q. My remote is not functioning.

5.a. Make certain the remote eye is connected into the correct plug labeled

‘INFRARED’. Make sure the battery is inserted into the remote properly. If you happen to

have a cell phone with a camera, aim the remote at the camera lens and press buttons. Most

cell phone cameras are able to see the IR operation.

6.q. I have no video output to my screen.

6.a. Try a different screen, then try a different source to the screen you’re trying to

use, to rule out or confirm its our product that is causing the problem.

Dieses Handbuch passt für folgende Modelle

Andere Garmin GPS Handbücher

Garmin

Garmin GPSMAP 3206 - Marine GPS Receiver Referenzhandbuch

Garmin

Garmin GNC 420W Montage- und Bedienungsanleitung

Garmin

Garmin DEZL LGV700 Bedienungsanleitung

Garmin

Garmin E Trex 30 Bedienungsanleitung

Garmin

Garmin nuvi 200 Series Referenzhandbuch

Garmin

Garmin nuvi 310 Bedienungsanleitung

Garmin

Garmin GPSMAP 4000 Series Bedienungsanleitung

Garmin

Garmin GPSMAP 60C Bedienungsanleitung

Garmin

Garmin N??VI nvi 660 Bedienungsanleitung

Garmin

Garmin Quest 2 Bedienungsanleitung

Garmin

Garmin GTN Xi Series Bedienungsanleitung

Garmin

Garmin BMW Motorrad Navigator III Bedienungsanleitung

Garmin

Garmin Apollo GX50 Bedienungsanleitung

Garmin

Garmin GPS 165 Bedienungsanleitung

Garmin

Garmin GPS 400W Bedienungsanleitung

Garmin

Garmin G3X Touch Handbuch

Garmin

Garmin nuvi 2250LT Gebrauchsanweisung

Garmin

Garmin nüvi 2200 Referenzhandbuch

Garmin

Garmin GPSMAP 62 Bedienungsanleitung

Garmin

Garmin iQue M4 - Win Mobile Bedienungsanleitung

Garmin

Garmin GDU 37X Bedienungsanleitung

Garmin

Garmin Astro Referenzhandbuch

Garmin

Garmin GPSMAP 76 CSx Kurzanleitung

Garmin

Garmin nuvi 360 Referenzhandbuch

Beliebte GPS Handbücher anderer Marken

Raven

Raven Cruizer II Handbuch

Hama

Hama 53118 Bedienungsanleitung

Jigabot

Jigabot EX Bedienungsanleitung

Pointer

Pointer Cellocator CelloTrack XT LTE Installationsanleitung

Queclink

Queclink GV55LITE Bedienungsanleitung

Voxson

Voxson Voxtrack GPS500 Gebrauchsanweisung

Starcom Systems

Starcom Systems Kylos Compact Bedienungsanleitung

Cobra

Cobra Marine MC 600Ci Bedienungsanleitung

Cellocator

Cellocator CelloTrack T Bedienungsanleitung

Enfora

Enfora Mini-MT GSM2228UG001 Bedienungsanleitung

Magellan

Magellan eXplorist 100 Bedienungsanleitung

LTE

LTE G50B Bedienungsanleitung

SkyGolf

SkyGolf SkyCaddie SG1 Bedienungsanleitung

Kenwood

Kenwood DNN9330BT Bedienungsanleitung

Safelet

Safelet Indra Bedienungsanleitung

Bushnell

Bushnell 360100 Bedienungsanleitung

Geneq

Geneq SXBlue Bedienungsanleitung

ORIGO

ORIGO ED308 Bedienungsanleitung