Garmin Zumo 500 Montageanleitung



Warning: The terms of the Garmin warranty require that the power cable with bare wire leads be

installed by experienced installers having the proper knowledge of automotive electrical systems and

skill in the use of special tools or hardware required for installation.

1: Connect Power to the Mount

Select a suitable and secure location to mount the zūmo on your motorcycle based on available

power sources and safe cable routing.

Bare wires with

inline fuse for

power connection

Power connector

About connecting audio

Standard jacks for microphone (2.5 mm) and audio out (3.5 mm) are located on the left side of

the mount (under a weather cap). When connecting your audio system to the zūmo, be sure to

consider the pathways needed to route the necessary cables. For information about hands-free

audio and phone options, refer to the zūmo 500/550 Quick Reference Guide and the zūmo 500/550

Owner’s Manual on disk.

2: Install the Handlebar Base

The zūmo includes parts for two handlebar installation

solutions. Custom mounts can require additional

hardware (www.ram-mount.com).

A) To install the U-bolt and handlebar base:

1. Place the U-bolt around the handlebar, and thread

the ends through the handlebar base.

2. Tighten the nuts to secure the base. Do not

overtighten.



note: The recommended torque is 50in-lb. Do

not exceed maximum torque of 80in-lb.

B) To install the handlebar base to

the clutch/brake clamp bracket:



note: Both 1/4” standard and M6

bolts are included. Match the size of

the factory bolts on your clutch/

brake clamp bracket.

1. Remove the two factory bolts on your

clutch/brake clamp bracket.

2. Thread the new bolts through the

handlebar base, spacers, and clamp bracket.

3. Tighten the bolts to secure the base.

zūmo™ 500/550 InstallatIon sheet

Clutch/brake

clamp bracket

Handlebar

base

Spacers

Handlebar base

Handlebar

U-bolt

Garmin® is a trademark of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. zūmo™is a

trademark of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of

Garmin.

March 2007 Part Number 190-00697-03 Rev. E Printed in Taiwan

3: Attach the Base Plate to

the zūmo Mount

1. ThreadtheM4x40mmatheadbolts

and nuts to attach the base plate to the

zūmomount.

2. Tighten the nuts to secure the base plate.

4: Attach the Base Plate to

the Handlebar

Base

1. Align the ball of the

handlebar base and the

ball of the base plate with

the double-socket arm.

2. Tighten the knob slightly.

3. Adjust for better viewing

and operation.

4. Tighten the knob to

secure the mount.

5: Install the zūmo

in the Mount

1. Plug the power cable

intothezūmomount.

For a better seal, tighten

the screws on the power

connector.

2. Flip the lever up.

3. Flip the weather cap down

and under (magnetic).

4. Placethezūmointothe

mount,andipthelever

down.

5. Tighten the security screw.

About the Security

Screwdriver

Use the security screw to better

secure the zūmo to the mount.

You can connect the screwdriver

to your key chain for easy access.

To remove the zūmo from

the mount:

1. Loosen the security screw.

2. Flip up the lever on the mount.

3. Liftoutthezūmo.

tiP: When your zūmo is not in the mount, use the

weather cap to prevent damage to the connector.

Lever

zūmo mount

Power

cable

Security screw

More Information

For more information about the

zūmo, refer to the zūmo 500/550

Owner’s Manual on disk.

See the Important Safety and

Product Information guide in the

product box for product warnings

and legal information.

Security screwdriver

zūmo mount

Base plate

Weather cap

Knob

Double-socket arm

Handlebar base

zūmo mount Base plate

Power socket

Mini-USB

port

Weather cap

Andere Handbücher für Zumo 500

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Garmin GPS Handbücher

Garmin

Garmin eTrex Venture - Hiking GPS Receiver Bedienungsanleitung

Garmin

Garmin Montana 600 Referenzhandbuch

Garmin

Garmin zumo 390LM Bedienungsanleitung

Garmin

Garmin BMW RideFinder GPS Bedienungsanleitung

Garmin

Garmin eTrex - Hiking GPS Receiver Bedienungsanleitung

Garmin

Garmin GVN 52 - Antenna For Navigation System Bedienungsanleitung

Garmin

Garmin nuvi 3550LM Gebrauchsanweisung

Garmin

Garmin Cessna Caravan G1000 Bedienungsanleitung

Garmin

Garmin G500H Bedienungsanleitung

Garmin

Garmin nuvi 2455LMT Bedienungsanleitung

Garmin

Garmin Golf Logix Bedienungsanleitung

Garmin

Garmin STREETPILOT 2610 Betriebsanleitung

Garmin

Garmin ECHOMAP UHD2 6 SV Bedienungsanleitung

Garmin

Garmin Astro 320 Bedienungsanleitung

Garmin

Garmin GPS 72 Bedienungsanleitung

Garmin

Garmin StreetPilot c300 Bedienungsanleitung

Garmin

Garmin 72H - Waterproof Handheld GPS Gebrauchsanweisung

Garmin

Garmin Oregon Series Bedienungsanleitung

Garmin

Garmin GPSMAP 64 Bedienungsanleitung

Garmin

Garmin GPSMAP 296 - Aviation GPS Receiver Handbuch

Garmin

Garmin nuvi 1200 Gebrauchsanweisung

Garmin

Garmin StreetPilot III Bedienungsanleitung

Garmin

Garmin EDGE 1030 PLUS Bedienungsanleitung

Garmin

Garmin G3X Touch Handbuch

Beliebte GPS Handbücher anderer Marken

Raven

Raven Cruizer II Handbuch

Hama

Hama 53118 Bedienungsanleitung

Jigabot

Jigabot EX Bedienungsanleitung

Pointer

Pointer Cellocator CelloTrack XT LTE Installationsanleitung

Queclink

Queclink GV55LITE Bedienungsanleitung

Voxson

Voxson Voxtrack GPS500 Gebrauchsanweisung

Starcom Systems

Starcom Systems Kylos Compact Bedienungsanleitung

Cobra

Cobra Marine MC 600Ci Bedienungsanleitung

Cellocator

Cellocator CelloTrack T Bedienungsanleitung

Enfora

Enfora Mini-MT GSM2228UG001 Bedienungsanleitung

Magellan

Magellan eXplorist 100 Bedienungsanleitung

LTE

LTE G50B Bedienungsanleitung

SkyGolf

SkyGolf SkyCaddie SG1 Bedienungsanleitung

Kenwood

Kenwood DNN9330BT Bedienungsanleitung

Safelet

Safelet Indra Bedienungsanleitung

Bushnell

Bushnell 360100 Bedienungsanleitung

Geneq

Geneq SXBlue Bedienungsanleitung

ORIGO

ORIGO ED308 Bedienungsanleitung