Installation of Dash Cam
1. Ensure windscreen is clean and free of debris. Attach adhesive mount
onto the Dash Cam and firmly attach to the windscreen.
2. Fix where the vision is not blocked (Place close to rear-view mirror is
recommended). Don't install device on airbag or within its working range.
3. Insert Micro SD card into the Dash Cam
4. Insert Mini USB end of the power cord into the Mini USB GPS
antenna/interface charging point of the Dash Cam. Connect USB charging
end of the cable into USB socket adapter, place adapter into 12-24V power
socket of vehicle.
5. Insert cable from GPS antenna into the Dash Cam’s Mini adapter port.
5. Adjust the mounting bracket and rotate the camera direction to get the
best view. Ensure of the vehicles bonnet is visible from the bottom of the
screen for alignment.
6. Turn vehicles ignition to accessories, push the power button on the Dash
Cam and it will power ON and start recording automatically, you will hear
an audible tone once powered.
7. A red circle on the display will start flashing when recording has started.
8. A white battery symbol on the display will show when the Dash Cam is
receiving power.
9. For the Dash Cam to work it must receive power from the charging
adapter, it cannot run from internal battery. Once power is removed or
turned off the Dash Cam will save the current file and turn off.
The internal battery is only used to keep date and time settings.
10. To prolong the battery life you must charged your Dash Cam on a 5 volt
home charger at least once a week for 2-3 hours with the dash cam off, if
you don't use the car daily, for cars that are used daily for more than 1 hour
you can charge the Dash Cam once every 3 weeks for 2-3 hours.
It is not recommended to power the dash cam with only the battery.
The battery will only run for 5 mins continuously, always use the charger
provided.