GE IC755ACC07ADP Bedienungsanleitung

Intelligent Platforms

Operator Interface Products

QuickPanel+7” Display Adapter Kit

IC755ACC07ADP

Installation Guide, GFK-2895A

October 2014

2 IC755ACC07ADP Installation Guide GFK-2895A

1. Overview

Attention: The UL Markings, ATEX Marking, and

all environmental ratings (NEMA4,

UL50 Type 4X, and IP65) have not

been validated for the QuickPanel+7”

Display when used with the adapter.

Therefore, the agency compliances

and standards do not apply to a

QuickPanel+7” Display with an

installed Adapter Kit.

Note: The use of a correctly installed adapter does

not affect the QuickPanel+product’s

compliance with CE Marking.

The QuickPanel+7” Display adapter kit facilitates

mounting the QuickPanel+7” Display into a panel with

a cutout previously sized for a QuickPanel 8” Display.

The QuickPanel+7” Display should first be inserted

into the adapter and secured using the clamps

provided with the display. The assembly is then

inserted into the 8” cutout in the customer panel.

Note: For user manuals, product updates, and

other information, go to the Support website

at http://www.ge-ip.com/support and refer to

Operator Interfaces and PC.

GFK-2895A IC755ACC07ADP Installation Guide 3

1.1 Functional Compatibility

The adapter kit can be used with the following

QuickPanel+7” Display units:

Part Number Description

IC755CxW07CDx QuickPanel

7” Display

1.2 Adapter Kit Contents

Component Qty

Plastic adapter assembly

(with attached gasket) 1

Mounting clamps 4

Slotted screws 8

4 IC755ACC07ADP Installation Guide GFK-2895A

1.3 Adapter Kit Features

The following figure displays the QuickPanel+7”

Display and adapter kit assembly properly installed

into a customer panel.

Mounting bracket (Qty 4)

Slotted screw (Qty 8)

Customer panel

Adapter

QuickPanel

Display

Assembly Installed in Customer Panel (Side View)

GFK-2895A IC755ACC07ADP Installation Guide 5

1.4 Panel Cutout Dimensions

The QuickPanel+ 7” Display adapter kit requires the

panel cutout dimensions displayed in the following

figure.

Adapter

227.84 mm (8.97 in)

186.44 mm (7.34 in)

Adapter Kit in Customer Panel (Rear View)

6 IC755ACC07ADP Installation Guide GFK-2895A

2. Installation

Notes:

The unit will not fit through the panel cutout with

a Secure Digital (SD) card not fully inserted and

recessed in the port.

The unit will not fit through the cutout with

cables attached.

To install the QuickPanel+ 7” Display adapter

assembly

1. If there is an SD card in the QuickPanel+7”

Display SD port, remove it. Also remove any

cables that may interfere with installation.

2. Insert the QuickPanel+7” Display into the

adapter/gasket assembly until the side snaps

click into the display housing. Maintain the

orientation of the display in relation to the adapter

to ensure proper clearance around display ports

and cooling vents.

GFK-2895A IC755ACC07ADP Installation Guide 7

Display

Adapter

assembly

Adapter

side snap

(Qty 2)

Adapter/Gasket Assembly with Side Snaps

3. Adjust the mounting bracket screw so the bottom

guide on the screw contacts the bottom surface

of the metal bracket body. The guide assists with

mounting bracket insertion.

Bracket body

Guide

Mounting Bracket Guide

8 IC755ACC07ADP Installation Guide GFK-2895A

4. Install the four mounting brackets supplied with

each QuickPanel+7” Display. Use the display

housing slots and the round adapter recesses to

locate each of the brackets.

Display

housing slot

Adapter recess

Display Housing Slot and Adapter Recess

Mounting bracket (Qty 4)

Installed Mounting Bracket

GFK-2895A IC755ACC07ADP Installation Guide 9

Installed Mounting Bracket (Close-up)

5. Using a #2 Phillips screwdriver, torque each

screw to a maximum of 0.11 to 0.23 Nm

(1 to 2 in-lb).

10 IC755ACC07ADP Installation Guide GFK-2895A

6. Insert the QuickPanel+7” Display adapter

assembly into the cutout panel as displayed in

the following figure. The gasket on the assembly

should touch the panel’s front surface once it is

fully inserted.

Inserting Assembly in Panel

Inhaltsverzeichnis

Andere GE Adapter Handbücher

GE PACSystems RSTi Bedienungsanleitung

GE RAK7023 Bedienungsanleitung

GE Digital Energy 1018959 Bedienungsanleitung

GE PACSystems RSTi Bedienungsanleitung

GE Masoneilan VECTOR V1100 Bedienungsanleitung

GE 21518 Bedienungsanleitung

GE VersaMax IC200SET001 Bedienungsanleitung

GE Digital Energy 1018959 Bedienungsanleitung

GE Socket Adapter Bedienungsanleitung

GE RAK7022 Bedienungsanleitung

GE CPCI3UX606 Kurzanleitung

GE 99000 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung