GE PB3-POS-RP ProBridge Bedienungsanleitung
PB3-POS-RP ProBridge
User Manual
PB3-POS-RP ProBridge
User Manual
2
Copyright Copyright © 2006, GE Security, Inc. All rights reserved.
This document may not be copied in whole or in part, or otherwise reproduced
except as specifically permitted under US copyright law, without the prior
written consent from GE.
Document number/0150-0231J.(July 2006)
Disclaimer THE INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT
NOTICE. GE ASSUMES NO RESPONSIBILITY FOR INACCURACIES OR OMISSIONS
AND SPECIFICALLY DISCLAIMS ANY LIABILITIES, LOSSES, OR RISKS, PERSONAL
OR OTHERWISE, INCURRED AS A CONSEQUENCE, DIRECTLY OR INDIRECTLY, OF
THE USE OR APPLICATION OF ANY OF THE CONTENTS OF THIS DOCUMENT. FOR
THE LATEST DOCUMENTATION, CONTACT YOUR LOCAL SUPPLIER OR VISIT US
ONLINE AT WWW.GESECURITY.COM.
This publication may contain examples of screen captures and reports used in
daily operations. Examples may include fictitious names of individuals and
companies. Any similarity to names and addresses of actual businesses or
persons is entirely coincidental.
Trademarks
and patents
GE and the GE monogram are registered trademarks of General Electric.
The PB3-POS-RP ProBridge product and logo are registered trademarks of
GE Security.
Other trade names used in this document may be trademarks or registered
trademarks of the manufacturers or vendors of the respective products.
Software
license
agreement
GE software supplied with GE products is proprietary and furnished under
license and can be used or copied only in accordance with the license terms.
THE ENCLOSED PROGRAM IS FURNISHED SUBJECT TO THE TERMS AND
CONDITIONS OF THIS AGREEMENT. RETENTION OF THE PROGRAM FOR MORE
THAN 30 DAYS, OPENING OF THE SEALED WRAPPER, IF ANY, SURROUNDING THE
PROGRAM, OR USE OF THE PROGRAM IN ANY MANNER WILL BE CONSIDERED
ACCEPTANCE OF THE AGREEMENT TERMS. IF THESE TERMS ARE NOT
ACCEPTABLE, RETURN THE UNUSED PROGRAM AND ANY ACCOMPANYING
DOCUMENTATION TO GE FOR A FULL REFUND OF THE LICENSE FEE PAID. (FOR
INFORMATION REGARDING THE RETURN OF PROGRAMS ENCODED OR
INCORPORATED WITHIN EQUIPMENT, CONTACT THE NEAREST GE SALES
OFFICE.)
Intended use Use this product only for the purpose it was designed for; refer to the data
sheet and user documentation. For the latest product information, contact
your local supplier or visit us online at www.gesecurity.com.
FCC
compliance
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications.
You are cautioned that any changes or modifications not expressly approved
by the party responsible for compliance could void the user's authority to
operate the equipment.
Regulatory
Operation of this equipment in a residential area may cause interference, in
which case the user is required to take all measures that are necessary, at the
user's expense, to correct the interference
3
TABLE OF CONTENTS
BEFORE YOU BEGIN....................................................5
INTRODUCTION............................................................7
PB3-POS-RP OVERVIEW.............................................................7
COMPATIBILITY.............................................................................8
ADDITIONAL EQUIPMENT ...............................................................8
DISCLAIMER .................................................................................8
PB3 SYSTEM COMPONENTS........................................9
INSTALLATION ENVIRONMENT ......................................................10
POWER.......................................................................................11
INSTALLATION...........................................................13
PB3 COMPONENTS.....................................................................13
TYPICAL SYSTEM LAYOUT...........................................................14
REQUIRED DIP SWITCH INFORMATION.........................15
DEFAULT (FACTORY) DIPSWITCH SETTINGS.................................15
DETAILED INSTALLATION STEPS ..................................................16
PB3-POS-RP ProBridge
User Manual
4
VERIFY OPERATION.................................................................... 17
DIP SWITCH SETTINGS ..............................................19
SW1 SETTINGS ..........................................................................19
SW2 SETTINGS ..........................................................................22
SW3 SETTINGS ..........................................................................24
SW4 SETTINGS ..........................................................................26
TROUBLESHOOTING ....................................................................27
HYPERTERMINAL SETUP............................................28
EQUIPMENT REQUIRED................................................................28
SETUP........................................................................................28
PB3 SPECIFICATIONS ...............................................40
CABLE SPECIFICATIONS..............................................................41
CONTACTING TECHNICAL SUPPORT.............................48
ONLINE PUBLICATION LIBRARY ....................................................48
5
Before You Begin
Read these instructions before installing or operating this
product.
Note: This installation should be made by a qualified service person and should
conform to local codes.
This manual provides installation and operation information. To
use this document, you must have the following minimum
qualifications:
• A basic knowledge of CCTV systems and components
• A basic knowledge of electrical wiring and low-voltage
electrical hookups
Use this product only for the purpose for which it was designed.
Customer Support
For assistance in installing, operating, maintaining, and
troubleshooting this product, refer to this document and any
other documentation provided. If you still have questions, contact
Technical Support:
GE Security
Call: 888-437-3287
Note: You should be at the equipment, ready with details before calling Technical
Support.
Conventions Used in this Manual
Boldface or button icons highlight command entries. The
following WARNING, CAUTION, and Note statements identify
potential hazards:
PB3-POS-RP ProBridge
User Manual
6
* WARNING:
Improper use of this equipment can cause severe bodily
injury or equipment damage.
** CAUTION:
Improper use of this equipment can cause equipment
damage.
Note: Notes contain important information about a product or procedure.
* This symbol indicates electrical warnings and cautions.
** This symbol indicates general warnings and cautions.
7
Introduction
This manual provides all the information necessary to properly
install this product.
** CAUTION:
Your system’s layout, camera assignment, PB3
termination, and serial device model should all be selected
before starting the installation.
PB3-POS-RP Overview
The GE PB3-POS-RP (PB3) is a specific model of ProBridge
that interfaces the DVMRe family of digital video
multiplexer/recorders to retail point-of-sale (POS) devices often
identified as electronic cash registers (ECRs) and some ATM’s.
One PB3 is required per device. Where multiple devices are
connected to a single DVMRe unit, the individual PB3’s are
interconnected through its built-in RS485 network.
A list of the supported serial devices associated with the devices
can be found in the DIP switch settings section on page 24.
PB3-POS-RP ProBridge
User Manual
8
Compatibility
The PB3 is compatible with the following GE DVMRe products:
DVMRe Type Software Version PPC Version
DVMRe-CD/CS V 3.07 (and above) V 3.07 (and above)
DVMRe-eZ V 3.20 (and above) V 3.14 (and above)
DVMRe-CT and
DVMRe-CT II
V 4.0 (and above) N/A
DVMRe-eZT
(Triplex) V 4.03 (and above) N/A
StoreSafe and
StoreSafe Pro II V 4.06 (and above) N/A
To verify the software version in your DVMRe, note the display
which identifies the version when the unit boots-up or you can
click the About box in the Main Menu.
Additional Equipment
The installer will need to provide suitable length RS485 cable
terminated with RJ-45 connectors on installations requiring
multiple PB3 units that are interconnected via the unit’s built-in
RS485 network.
Disclaimer
The GE ProBridge components identified within this document
provide means of capturing transaction text/data for use by the
DVMRe family of digital video recording/transmission products.
The ProBridge components translate the data into a usable
format by the DVMRe and permits associating transaction data
9
with specific cameras. GE assumes no responsibility for the
amount and type of information available, the operation, non-
operation or erroneous operation of the customer provided
equipment that interfaces with the ProBridge.
PB3 System Components
You should find the following PB3 system components when the
product is unboxed.
Figure 1-1. PB3-POS-RP Box Contents.
PB3-POS-RP ProBridge
User Manual
10
PB3-POS-RP ProBridge includes:
• (1) PB3-POS-RP ProBridge unit.
• (1) P/N 4310-0034B: RJ45 to RJ45 cable. Connects the
PB3 to RS485 Network. This cable is 6’ in length.
• (1) P/N 4310-0068A: serial device Interconnect Cable.
This cable is 14” in length.
• (1) P/N 4310-0047B: RJ45 to DB9F cable. Connects the
PB3 to the DVMRe. This cable is 6’ in length.
• (1) P/N 4310-0069A: serial device to PB3 Cable. This
cable is 6’ in length.
• (1) P/N 0900-0176: Triport Cable. This cable is 6’ in
length.
• (1) P/N 4010-0007: 12VDC 120VAC Power Supply or (1)
P/N 4010-0008: 12VDC 220VAC Power Supply.
• (1) P/N 0150-0231C: PB3-POS-RP User Manual.
Installation Environment
Power: Ensure that the installation site’s AC power is stable
and within the rated voltage of the external power supply. If the
site’s AC power is likely to have spikes or dips, use power line
conditioning or an Uninterruptible Power Supply.
Temperature: Observe the unit’s ambient temperature
specifications when choosing a location for the unit. Extremes of
heat or cold beyond the specified operating temperature limits
may cause the unit to fail. Do not install this unit on top of other
hot equipment.
Inhaltsverzeichnis
Andere GE Netzwerk-Hardware Handbücher
GE
GE TruVision NVR 40 Bedienungsanleitung
GE
GE ATS1203 Montageanleitung
GE
GE MDS SD Series Bedienungsanleitung
GE
GE 40M06AAG Bedienungsanleitung
GE
GE MDS iNET Series Bedienungsanleitung
GE
GE TruVision NVR 40 Bedienungsanleitung
GE
GE DEH41552 Bedienungsanleitung
GE
GE MDS TransNET Bedienungsanleitung
GE
GE 3300 Bedienungsanleitung
GE
GE MDS 4710M Bedienungsanleitung
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
