GE Concord express Leitfaden

Troubleshooting

Trouble Beeps and Trouble Messages

Trouble beeps are a series of ve short beeps, once a minute. When your system detects a problem, it lets

you know by sounding trouble beeps from touchpads and sirens, and by trouble messages on touchpad

displays.

Silencing Trouble Beeps

If possible, correct the situation which is causing the trouble beeps. If this is not possible, call for service. If

the problem is not corrected, trouble beeps and messages start again 4 to 10 hours later.

To stop trouble beeps:

Perform a system status check by pressing *‚ on a touchpad, Change the arming level.

Frequently Asked Questions

Q. I can’t arm my system.

A. Try the following:

• If arming to Level 2—STAY or Level 3—AWAY, make sure all monitored perimeter doors and windows are

closed.

• Press ‚ for a system status and for clues to the problem.

• Call your security dealer.

Q. I cannot bypass a sensor: my alphanumeric touchpad displays“INVALID” and my xed display touchpad

sounds a single, long beep.

A. Possible explanations include:

• The sensor you’re trying to bypass may not be active in the current arming level. For example, an interior

motion detector will not be active in Level 2—STAY.

• Some sensors can be bypassed only in certain levels. For example, motion sensors in Level 3—AWAY.

• You may be trying to bypass a 24-hour sensor that cannot be bypassed, such as a smoke detector.

Q. I can’t arm my system to Level 3—AWAY.

A. If a delay door is open while you’re trying to arm the system to Level 3, the system will arm to Level 2

instead. Close the delay door, arm the system to Level 3, then exit through a delay door.

Andere Handbücher für Concord express

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere GE Sicherheitssystem Handbücher

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung