GE Concord Bedienungsanleitung

Concord/Express

quick reference guide

1. Set your alarm when leaving home (motion detectors ON):

a. Close doors and windows until no zones show open.

b. Press AWAY (3) + User Code.

c. Red “ARMED” light will turn on. Exit the premises within 60 seconds.

2. Disarm the system (or cancel an accidental alarm):

a. Keypad will beep. You have 30 seconds to disarm.

b. Press OFF (1) + User Code.

3. Set the alarm when at home with a delay (motion detectors OFF):

a. Close doors and windows until no zones show open.

b. Press STAY (2) + User Code.

c. Red “ARMED” light will turn on.

4. Disarm before opening doors:

a. Press OFF (1) + User Code.

5. Set the alarm when at home with no delay (motion detectors OFF):

a. Close doors and windows until no zones show open.

b. Press STAY (2) + User Code + Press NO DELAY (4) button.

c. Red “ARMED” light will turn on.

6. If an alarm has been triggered:

a. Before proceeding, verify that the alarm was triggered accidentally. If you

aren’t sure, wait for the phone call from central station.

b. If accidental, press OFF (1) + User Code. This will silence the alarm and cancel

dispatch.

Continued on Back

7. Turn the door chime on or off:

a. Press CHIME (7) + 1.

b. You will hear three beeps if enabled, one beep if disabled.

c. 8. Check system status:

d. Press * for short status

e. Press * * for long status

f. To change your four-digit Master Code:

g. Press 9 then the four digit master code

h. It will say TIME and DATE

i. Press the down arrow or 8 button until it says USER CODES

j. Press#

k. Press the down arrow or 8 button until it says SYSTEM MASTER CODE

l. Press#

m. Enter the new four digit MASTER CODE

n. Press#

o. Press * until it says USER CODES again

p. Press the up arrow or A button until it says EXIT PROGRAMMING READY

q. Press#

The manufacturer of your security system recommends that you test it weekly to

ensure that the system is communicating fully with the Monitoring Station in the event

that an alarm is triggered. If for any reason you feel your security system is not

functioning properly, do not hesitate to call our office at 770-963-0305. We have

technicians available to assist you twenty-four hours per day.

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere GE Sicherheitssystem Handbücher

GE

GE INT-22.5R1-24 Bedienungsanleitung

GE

GE 45129 Bedienungsanleitung

GE

GE 8RP Board Montageanleitung

GE

GE AS610RF Bedienungsanleitung

GE

GE Deluxe 45117 Bedienungsanleitung

GE

GE Euro Simon Bedienungsanleitung

GE

GE 45133 Bedienungsanleitung

GE

GE 45235 Bedienungsanleitung

GE

GE AL-1291 Point ID Bedienungsanleitung

GE

GE 600-1064-95R b Bedienungsanleitung

GE

GE SmartHome Series Bedienungsanleitung

GE

GE 56789 Bedienungsanleitung

GE

GE JSC1300 Bedienungsanleitung

GE

GE Security Pro 7000 Bedienungsanleitung

GE

GE Concord 4 Series Bedienungsanleitung

GE

GE 51209 Bedienungsanleitung

GE

GE 60-806-95R-16Z - Security Concord Express System Control... Bedienungsanleitung

GE

GE Concord 4 Bedienungsanleitung

GE

GE Concord 4 Gebrauchsanweisung

GE

GE ARITECH AS399 Bedienungsanleitung

GE

GE SIMON XT Bedienungsanleitung

GE

GE 45131 Bedienungsanleitung

GE

GE NetworX Bedienungsanleitung

GE

GE Concord Ultra Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung