GE 99001 Bedienungsanleitung

Portable Stereo Transmitter

User Manual

Model 99001

Class 2

CAUTION

This product does not have a user-serviceable battery. Please do NOT attempt

to change the battery yourself. The battery used in this device may present a

risk of ﬁre or chemical burn if misused. Please avoid extreme temperatures.

Do not use this product on an airplane in transit as this could disrupt

communication.

Vers. 1 8/06

FCC Information: The Federal Communication Commission Radio

Frequency Interference Statement includes the following paragraph:

This equipment has been tested and found to comply with the limits for a

Class B Digital Device, pursuant to part 15 of the FCC Rues. These limits are

designed to provide reasonable protection against harmful interference in

a residential installation. This equipment uses, generates and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communication.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning

the equipment Off and On, the user is encouraged to try to correct the

interference by one or more of the following measures

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to

which he receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

IMPORTANT NOTE

To comply with the FCC RF exposure compliance requirements, no change

to the antenna or the device is permitted. Any change to the antenna or the

device could result in the device exceeding the RF exposure requirements

and void the user’s authority to operate the device.

CLASS 2 OPERATION

Class 2 Bluetooth®devices provide a maximum range of approximately 10

meters or 30 feet. Class 1 devices have a maximum range of 100 meters

or 300 feet. Since Bluetooth®connectivity is bi-directional, the maximum

range between two devices depends upon both units’ operational class.

As an example, when one Class 1 device is paired with one Class 2 device,

the maximum range between them will be limited to 10 meters or 30 feet.

Both devices would have to be Class 1 in order to achieve the maximum 100

meter range.

Using the Product

Thank you or choosing the GE 99001 Portable Stereo

Transmitter. This device supports the A2DP Bluetooth®

proﬁle which provides users with the ability to stream

high quality audio via Bluetooth®wireless technology

from any stereo device that has a 3.5mm headphone

jack or line output.

Charging

• Charge the unit for a minimum of 12 hours before

ﬁrst use. Use the enclosed USB charging cable or

the AC Adapter to fully charge the transmitter.

• The red LED indicator will stay on constantly when

charging.

• The transmitter’s red LED charging indicator will shut

off automatically when the battery is fully charged.

• The red LED indicator will start to ﬂash when the

power is low. Charge the transmitter when you see

the LED low power indicator ﬂashing.

Connecting the transmitter to an audio source

1. Use the 3.5mm stereo patch cable that came with

the transmitter to connect from the line input of the

transmitter to the headphone or line output jack on

your portable audio device.

2. Turn on the audio device as you normally would

to play

3. Slide the power switch located on the top of the

GE 99001 transmitter to the on position.

Pairing the transmitter to a Bluetooth®enabled

device such as a pair of stereo headphones

See the owner’s manual of the reception device for

instructions. Most Bluetooth®enabled headphones will

automatically pair with the GE 99001. Some devices may

require a PIN code during the pairing process; enter 0000

if needed.

Note: It may take up to 2 minutes for the GE 99001

transmitter and your Bluetooth®audio receiver to pair.

While the GE 99001 and your audio receiver are pairing

you will see the Blue LED on the GE 99001 ﬂashing quickly.

Once your GE 99001 is paired you will see a slow and

steady blinking.

Turning the Transmitter OFF to Conserve

Battery Power

If you don’t want to use the GE 99001 transmitter, turn off

power by moving the power switch to off. It can easily be

paired back with your devices the next time you choose to

use it.

Troubleshooting

1. How do I know when the battery on the transmitter is

running low?

The battery power is almost exhausted when one or more

of the following scenarios happen:

a. You can constantly hear breaks on the audio link about

every 30 seconds, or

b. You cannot pair any Bluetooth®receivers to the

transmitter after several tries.

2. Why does the transmitter turn off automatically?

If you turn on the transmitter but it cannot ﬁnd any device

to pair with after 3 minutes, it will turn off automatically to

conserve battery life.

Speciﬁcations

Standard Bluetooth®1.2 compliant

Power Class Class 2

Frequency Band 2.402~2.480 GHZ unlicensed ISM band

Proﬁle Supported A2DP

Audio Format SBC

Rx Sensitivity < 0.1% BER at -80 dBm

RF Output Power -6dBm to 4 dBm

Sampling Rate 48 KHz

SNR >85dB

Antenna embedded antenna

Working Distance Up to 30 feet in open space*

Power Consumption Music Streaming 75 mA (Typical)

Power Supply 550mAH Lithium Ion Battery

Operating Temperature -10 °C ~ +55 °C

Dimensions 47.54mm (L) × 47.54mm (W) × 29.52mm (H)

Weight About 20 grams

*Note: The maximum operating range depends on the paired phone model,

battery power, and environmental factors.

DISCLAIMER

While every effort has been made to ensure that the information in this

manual is accurate and complete, no liability will be accepted for any

errors and/or omissions made. The manufacturer reserves the right to

make changes and improvements to the speciﬁcations and features of the

hardware and ﬁrmware of the products described in this document without

prior notice. Reproduction, transfer, distribution or storage of part or all

of the contents in this document in any form is prohibited without prior

permission of the manufacturer. All trademarks acknowledged.

Limited One-Year Warranty

Jasco Products Company warrants this product to be free from

manufacturing defects for a period of one year from the original date

of purchase. This warranty is limited to the repair or replacement of this

product only and does not extend to consequential or incidental damage to

other products that may be used with this unit. This warranty is in lieu of all

other warranties expressed or implied. Some states do not allow limitations

on how long an implied warranty lasts or permit the exclusion or limitation

of incidental or consequential damages, so the above limitations may not

apply to you. This warranty gives you speciﬁc rights, and you may also

have other rights which vary from state to state. If this unit should prove

defective within the warranty period, return prepaid with dated proof of

purchase to: Jasco Products Company, 10 E. Memorial Road,

Oklahoma City, OK 73114

The Bluetooth®word mark and logos are owned by Bluetooth®SIG, Inc. and

any use of such marks by JASCO Inc. is under license. Other trademarks and

trade names are those of their respective owners.

Made in China

Inhaltsverzeichnis

Andere GE Sender Handbücher

GE VT4010M Installationsanleitung

GE DigitalFlo XGM868i Bedienungsanleitung

GE XMT868 Bedienungsanleitung

GE DewPro MMY30 Bedienungsanleitung

GE DewPro MMY31 Bedienungsanleitung

GE BC-375-E Bedienungsanleitung

GE DigitalFlow XGS868i Betriebsanleitung

GE SSB Jr. Bedienungsanleitung

GE T5000 Series Bedienungsanleitung

GE MDS TD220MAX Bedienungsanleitung

GE IFS VT1101M Installationsanleitung

GE VT6010 Montageanleitung

GE Masoneilan 12420 Installations- und Betriebsanleitung

GE VeriDri Bedienungsanleitung

GE 97651 Bedienungsanleitung

GE MASTR II Bedienungsanleitung

GE XMO2 Bedienungsanleitung

GE HygroPro Bedienungsanleitung

GE XGS868 Betriebsanleitung

GE VT4930WDM Installationsanleitung

GE DewPro MMY31 Bedienungsanleitung

GE HygroTrace Bedienungsanleitung

GE UTX878 Ultrasonic Bedienungsanleitung

GE MASTR II Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung