GE RM24914 Bedienungsanleitung

Universal Remote

Instruction Manual

Control Remoto Universal

Manual de Instrucciones

RM24914

RM84914

TV DVD

VCR

INFO SLEEP

ENTER

INPUT

Universal

MUTE

Congratulations on your purchase of the RM24914

Universal Remote Control. The RM24914 is one of the

most easy to use remote controls available today.

With the RM24914, juggling multiple remote controls

is a thing of the past! Your RM24914 controls up to

four devices, including the most popular brands of TV,

VCR, DVD, CBL, and SAT. The RM24914 is easy to use,

easy to program, and it gives you total control—at the

touch of your ﬁngertips!

Note: Some functions from your original remote may

not be controlled by this remote. Use the original

remote, if available, to control such functions.

Sometimes buttons other than described in these

instructions may actually perform the function. For

example, the CHAN and VOL buttons might be used

to navigate through menu choices. We recommend

you experiment with the remote to identify if such

situations pertain to your equipment.

Introduction..................................................................................... 3

Setup .................................................................................................. 3

Battery Installation............................................................... 3

Battery Saver........................................................................... 3

Code Saver ............................................................................... 3

Code Setup............................................................................... 3

Button Functions................................................................... 4

Direct Code Entry................................................................... 6

Code Search............................................................................. 7

Using Your Remote...................................................................... 8

Code Identiﬁcation ............................................................... 8

Using SHIFT.............................................................................. 9

Sleep Function......................................................................10

Controlling Devices with Power On and Off............11

Controlling Combo Devices............................................11

VCR/DVD/DVR Punch-Through.....................................11

Volume/Mute Control and Punch-Through.............12

All Volume/Mute Control to any one Mode.............12

Setting any Mode for its own Volume/Mute...........13

Troubleshooting..........................................................................14

Table of Contents

Battery Installation

1. On the back of the remote, push down on the tab

and lift the cover off.

2. Match the batteries to the + and - marks inside the

battery case, then insert 2 AAA Alkaline batteries.

3. Press the battery cover back into place.

Battery Saver

Your remote automatically turns off if the buttons

are depressed more than 30 seconds. This will save

your batteries should your remote get stuck in a place

where the buttons remain depressed (e.g., between

the sofa cushions).

Code Saver

You will have up to 10 minutes to change the

batteries in your remote without losing codes you

have programmed. However, do not press any

buttons until batteries are installed in the remote. If

buttons are pressed without batteries in the remote,

all codes will be lost.

Code Setup

The SETUP button is used to setup the remote. You

can either setup the remote using the code tables (on

separate sheet), or you can search through the library

of codes until you ﬁnd a code that works for your

product. Please refer to “ Code Search” on page 7 for

more information on using the code search feature to

learn how to search through the library of codes for

your products.

NOTE: You can store any kind of code under any

mode (except TV). I.E. you can store a VCR code under

the CBL/SAT button, or a Cable code under the DVD

button, etc. However, you can only store TV codes

under the TV button.

Setup

MUTE

RECORD, PLAY, STOP,

REW, FF, PAUSE VCR

control buttons operate

your VCR even when the

remote is set to operate

the TV. Also operates DVD

Scan -/+. Note the VCR

buttons also control DVD

when in DVD Mode.

Some buttons on the remote might have functions

that are referred to by different names on the device

you are controlling. E.G. PREV.CH may be called

RECALL, or ENTER may be called DISPLAY. These

differences depend on the brand and model of your

product. Also, this remote can only operate features

that exist on your product. E.G., your product must

have PREV.CH ability for the PREV.CH button to

operate this feature.

TV, CBL/SAT, DVD, VCR

Selects product to

be operated.

Red Indicator Lights when

any button is pressed.

PREV.CH Returns to

the previously selected

channel.

Button Functions

INFO button brings up DVD

Display or Control Menu for

Chapter/Track/Title number,

Time remaining/elapsed,

system information, etc. Also

displays on-screen channel

information.

MENU Press and release

SHIFT/SETUP then MENU/

INFO to display the Menu

on the TV. See “Using SHIFT

for Menu and Navigation”

description on Page 9 for

more information.

MUTE

VOLUME UP/DOWN

Changes the volume

level of the product,

normally the TV.

NUMBERS

Enter numbers for direct

channel selection. Some

products require ENTER

to be pressed after

channel selection.

ON•OFF Turns

product On or Off.

CHANNEL Up/Down

Changes the channels.

Button Functions, cont.

INPUT

For some TVs, press

repeatedly to select from

available viewing sources

(antenna, cable box, VCR, etc.).

SETUP Used to setup the remote,

and for code search function.

SHIFT Press and release to access buttons

labeled in reverse print (OK, MENU,

EXIT). See “Using SHIFT for Menu and

Navigation” description on Page 9

Note: The REC button must be pressed TWICE to record from

your VCR. For some brands of VCRs, you might need to press

the REC button once, then press it again for three seconds.

ENTER

For some TV models,

used after direct

channel number

entry to immediately

change to the

selected channel.

MUTE Turns off the

TV sound while the

picture remains.

OK Selects menu

items for the device

you are controlling.

SLEEP enables the remote to

turn off your TV after a period

of 1 to 99 minutes.

EXIT Exits On-Screen Menus

and/or Returns to previous On-

Screen selection.

Write your codes down here for easy reference later.

Direct Code Entry

1. Press and hold the SETUP button until the

red indicator stays on, then release the

SETUP button.

2. Press and release the desired device

button (TV,VCR, etc.). The red indicator

blinks, then stays lit.

3. Enter the 4 digit code

from the code tables

(on separate sheet).

Note: after a valid code

entry, the red indicator

turns off. For an invalid

code, the red indicator

ﬂashes.

4. With your device on, press ON•OFF.

If the device turns off, no further

programming is required. Note: If

some buttons do not operate your

equipment, try one of the other

codes for your brand.

Device Device stored Code

TV TV

CBL/SAT

DVD

VCR

Code Search

If your device does not respond after you have tried

all the codes for your brand, or if your brand is not

listed, try searching for your code by following these

steps.

1. Manually turn on the device (TV, VCR, etc.) to be

controlled.

2. Press and hold the SETUP button until

the red indicator stays on, then release

the SETUP button.

3. Press and quickly release the desired

device button (TV, VCR, etc.). The red

indicator blinks off once.

4. Press the ON•OFF button repeatedly

(up to 300 times) until the device

to be controlled turns off. The red

indicator blinks off with each button

press.

Most users will store VCR codes under the VCR button,

Cable codes under CABLE, etc. If (for example) you

want to store a VCR code under CABLE, ﬁrst follow

the procedure for Direct Code Entry (previous page)

and press CABLE in step 2 of Direct Code Entry, then

enter ANY VCR code in step 3 of Direct Code Entry.

Then follow the steps above for Code Search.

Note: Code Search starts from the currently stored

four digit number under that mode. Sometimes the

ﬁrst code that “works” with your device may only

allow limited functionality (e.g. the MENU button

might not work). There may be a code that performs

more functions. Continue the code search process

until the best code is found.

5. Press and release ENTER to install the

code.

Using Your Remote

Code Identiﬁcation

The Code Identiﬁcation Feature allows you to identify

the four digit library code stored under your device

button. For example, if you want to ﬁnd out what four

digit code is stored under your TV device button,

follow the six steps below:

1. Press and hold the SETUP button until

the red indicator stays on. Release the

SETUP button.

2. Press and release the desired

device button (TV, VCR, etc.). The red

indicator blinks, then stays lit.

3. Press and release the SETUP button. The

red indicator blinks once and remains lit.

4. To ﬁnd the ﬁrst digit for the code stored

under the device

button pressed in step

2, press each numeric

button from 0-9 in

turn. The number that

causes the indicator

light to blink is the ﬁrst

digit in your code.

5. To ﬁnd the second

digit, repeat step 4.

6. Repeat step 4 to ﬁnd the third and fourth digit.

This time the red indicator turns off and stays off.

Using Your Remote, cont.

MENU/INFO.

For OK, press and release SHIFT/

SETUP then OK/MUTE.

For EXIT, press and release SHIFT/

SETUP then EXIT/SLEEP.

For Up, Down, Left or Right

Navigation, press and release SHIFT/

SETUP followed by the respective

Channel or Volume button.

Using SHIFT for Menu and Navigation

The SHIFT button allows access to more than one

function for certain buttons.

Use the SHIFT/SETUP button prior to accessing the

MENU, OK, EXIT and Navigation functions e.g.:

For MENU, press and release SHIFT/SETUP then

Using Your Remote, cont.

Sleep Function

The Sleep button enables the remote to turn off your

TV after a period of 1 to 99 minutes as shown below.

The remote must be in TV mode to set a Sleep Timer.

This feature works even if your TV does not have a

sleep feature.

1. Press and release the TV device button.

2. Press and hold the Sleep button until the

LED remains lit (about 2-3 seconds).

4. Press and release the

numeric buttons (01-99)

for the time required.

The LED will blink off to

indicate button press

acceptance.

5. TV Sleep Timer is set.

6. Leave the Remote pointing towards the TV with

an unobstructed path.

To cancel the Sleep Timer, press and hold the Sleep

button until the LED blinks, or press and release the

Power button in TV mode.

3. Release the Sleep button.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Beliebte Universalfernbedienung Handbücher anderer Marken

Pronto

Pronto Peel Bedienungsanleitung

Radio Shack

Radio Shack Wireless Remote Control System Bedienungsanleitung

AUVIO

AUVIO Universal Home Theater Remote Bedienungsanleitung

Philips

Philips Icon SRU4106 Bedienungsanleitung

THOMSON

THOMSON ROC4309 Bedienungsanleitung

Philips

Philips pm625S Bedienungsanleitung

RCA

RCA RCU600WMS - Universal Remote Control Bedienungsanleitung

Blackweb

Blackweb BWB17AV002 Bedienungsanleitung

Marmitek

Marmitek DoorGuard 300 Bedienungsanleitung

Chunghop

Chunghop RM-L618 Bedienungsanleitung

Anderic

Anderic KTN828 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Bedienungsanleitung

Medion

Medion E74023 Bedienungsanleitung

intensity

intensity RM02A Bedienungsanleitung

Sky

Sky MY Bedienungsanleitung

RCA

RCA RCU600M - Universal Remote Control Bedienungsanleitung

Savant

Savant SUR-0500 Kurzanleitung

GDI

GDI GDI-WT2K Bedienungsanleitung