Geeetech A30 Bedienungsanleitung
Geeetech A30 3D Printer
GEEETECH
- 1 -
Copyright Declaration
The copyright of this manual belongs to the Shenzhen GETECH
CO., LTD. (hereinafter referred to as the "Geeetech"), and all rights
reserved. No part of this specification should be reproduced or
extracted in any forms or means without the prior written consent of
Geeetech by any company and individuals.
Technical Support
If you are interested in the technology of 3D printing, flight
control and U-home, welcome to Geeetech, we have series of
made-up products, main boards, modules and a variety of peripherals
for you. Or if you are looking for relevant information or technical
support, please log in on our Forum where you can find anything you
want about open source. To know more about our new products,
please visit www.geeetech.com , we will serve you wholeheartedly.
GEEETECH
- 2 -
SAFETY INSTRUCTIONS
It is easy to build Geeetech A30, since it comes almost fully
assembled. We have provided detailed instructions to help you
assemble it easily. Please make reference to the Quick Start Guide.
However, ultimately we cannot be responsible for your health
and safety whilst building or operating the printer, with that in mind
be sure you are confident with what you are doing prior to
commencing with building or buying. Read the entire manual to
enable you to make an informed decision.
Building and operating involves electricity, so all necessary
precautions should be taken and adhered to. The printer runs on 12V
supplied by a certified power supply, so you shouldn’t ever have to
get involved with anything over 12V. Please bear in mind there can
still be high currents involved even at 12V.
High temperatures are involved with 3D Printing. The Extrusion
nozzle of the hot end can run at about 230°C, the heated bed at about
110°C and the molten plastic extruded will initially be at around
200°C. Therefore, special care and attention should be made when
GEEETECH
- 3 -
handling these parts of the printer during operation. We cannot be
held responsible for any loss, damage, threat, hurt or other negligent
result from either building or using the printer.
GEEETECH
- 4 -
INTRODUCTION:
This Geeetech A30 3D printer is designed and manufactured by
Shenzhen Getech Co., Ltd. Geeetech I3 A30 features simple
assembly, easy debugging, large building volume and more stable
performance. The simplified structure makes the printer much easier
to operate.
GEEETECH
- 5 -
PACKAGE LIST:
This list includes all the parts required to assemble your A30 3D
Printer. After you received your package, please check if all the parts
listed are included. Also make sure all the components are in good
condition and not damaged during shipping. If anything is missing
please contact with our customer service straight away, provide us the
NO. , Name, and Qty.
No. Name Specs Qty. Pic.
1
Bottom frame
parts
Pre-assembled
1
2 Vertical frame
parts Pre-assembled 1
GEEETECH
- 6 -
3 Control box
Power supply
12V，41A，500W
1
Materials in the Tool Box
4 Hex screw M5*20mm 4
5 Spring washer M5 4
6 Filament spool
1
7 Hex screw
M3*6mm
2
GEEETECH
- 7 -
8
Power cable
1
9
A-B USB cord
Blue 1
10
Z axis stator kit
(right)
Aluminium
alloy, Thickness
3mm
1
11 Z axis stator kit
(left)
Aluminium
alloy, Thickness
3mm
1
12
3D touch stator
Thickness 5mm
1
13
Filament detector
kit
3D printed shell
(Random color) 1
GEEETECH
- 8 -
14 Zip tie 1 bunch 1
15 Allen key 1
16
Pin 1
17 Starter filament 1
18 Spare screw
package 1
19 TF card 1GB
GEEETECH
- 9 -
GENERAL CARE AND MAINTENANCE
As with all the electronic equipment, it is important to keep your
printer clean to extend its life. Regularly remove dust and debris with
a microfiber cloth or compressed air. Dredge the tube and the nozzle
after use every time to ensure fluent performance.
Don’t leave the heaters on the printer turned on for a long
periods of time when not used.
Don’t leave your printer in shady and moist places, which may
exacerbate the problems associated with erosion.
The three axes of the GEEETECH A30 are lubricated with
grease for smooth operation and can last for a long time.
Grease may need to be re-applied to your printer to maintain
smooth performance.
Avoid positioning your power supply unit in such a way that
the brick is hanging, pulling, or putting any unnecessary
stress in the electrical wires and components.
Andere Handbücher für A30
3
Inhaltsverzeichnis
Andere Geeetech 3D-Drucker Handbücher
Geeetech
Geeetech A30 Bedienungsanleitung
Geeetech
Geeetech Prusa I3 A pro Bedienungsanleitung
Geeetech
Geeetech Aluminum Prusa I3 Bedienungsanleitung
Geeetech
Geeetech Prusa I3 M201 Bedienungsanleitung
Geeetech
Geeetech Prusa I3 A pro Bedienungsanleitung
Geeetech
Geeetech Delta Rostock mini G2 pro Bedienungsanleitung
Geeetech
Geeetech Prusa I3 A pro Bedienungsanleitung
Geeetech
Geeetech Acrylic I3 Pro Bedienungsanleitung
Geeetech
Geeetech A30 Bedienungsanleitung
Geeetech
Geeetech prusaI3 pro C Bedienungsanleitung
Geeetech
Geeetech acrylic Prusa I3 Betriebsanleitung
Geeetech
Geeetech Rostock 301 Bedienungsanleitung
Geeetech
Geeetech A20M Bedienungsanleitung
Geeetech
Geeetech Prusa M201 Bedienerhandbuch
Geeetech
Geeetech A10T Bedienungsanleitung
Geeetech
Geeetech Acrylic I3 Pro Bedienungsanleitung
Geeetech
Geeetech A10M Bedienungsanleitung
Geeetech
Geeetech I3 Pro C Bedienungsanleitung
Geeetech
Geeetech Prusa I3 X Bedienungsanleitung
Geeetech
Geeetech Mizar S Bedienungsanleitung
