Gefen Pro GEF-MOD-848-DVI Bedienungsanleitung

Audio

Embedder

3GSDI

Release A4

User Manual

GEF-MOD-848-DVI • GEF-MOD-848-DVIELR

GEF-MOD-848-ELR • GEF-MOD-848-DVI1FO

GEF-MOD-848-1FO • GEF-MOD-848-DPDVI

GEF-MOD-848-DPELR • GEF-MOD-848-DP1FO

DISPLAYSSOURCES

Modular

Matrix

8x8 Modular Matrix

Important Safety Instructions

GENERAL SAFETY INFORMATION

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this product near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

8. Do not install or place this product near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the third prong are provided for

your safety. If the provided plug does not t into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specied by the manufacturer.

12. To reduce the risk of electric shock and/or damage to this product, never handle or

touch this unit or power cord if your hands are wet or damp. Do not expose this

product to rain or moisture.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does not operate normally,

or has been dropped.

15. Batteries that may be included with this product and/or accessories should never be

exposed to open ame or excessive heat. Always dispose of used batteries

according to the instructions.

RACK MOUNT SAFETY INFORMATION

a. Maximum recommended ambient temperature: 40 ˚C (104 ˚F).

b. Increase the air ow as needed to maintain the recommended temperature

inside the rack.

c. Do not exceed maximum weight loads for the rack. Install heavier equipment in the

lower part of the rack to maintain stability.

8x8 Modular Matrix

Warranty Information

Gefen warrants the equipment it manufactures to be free from defects in material and

workmanship.

If equipment fails because of such defects and Gefen is notied within two (2) years from

the date of shipment, Gefen will, at its option, repair or replace the equipment, provided

that the equipment has not been subjected to mechanical, electrical, or other abuse or

modications. Equipment that fails under conditions other than those covered will be

repaired at the current price of parts and labor in effect at the time of repair. Such repairs

are warranted for ninety (90) days from the day of reshipment to the Buyer.

This warranty is in lieu of all other warranties expressed or implied, including without

limitation, any implied warranty or merchantability or tness for any particular purpose, all of

which are expressly disclaimed.

1. Proof of sale may be required in order to claim warranty.

2. Customers outside the US are responsible for shipping charges to and from Gefen.

3. Copper cables are limited to a 30 day warranty and cables must be in their original

condition.

The information in this manual has been carefully checked and is believed to be accurate.

However, Gefen assumes no responsibility for any inaccuracies that may be contained

in this manual. In no event will Gefen be liable for direct, indirect, special, incidental, or

consequential damages resulting from any defect or omission in this manual, even if

advised of the possibility of such damages. The technical information contained herein

regarding the features and specications is subject to change without notice.

For the latest warranty coverage information, refer to the Warranty and Return Policy under

the Support section of the Gefen Web site at www.gefen.com.

PRODUCT REGISTRATION

Please register your product online by visiting the Register Product page under the

Support section of the Gefen Web site.

iii

8x8 Modular Matrix

Gefen, LLC

c/o Customer Service

20600 Nordhoff St.

Chatsworth, CA 91311

Telephone: (818) 772-9100

(800) 545-6900

Fax: (818) 772-9120

Email: [email protected]

Visit us on the Web: www.gefenpro.com

Technical Support Hours: 8:00 AM to 5:00 PM Monday - Friday, Pacic Time

For 24 / 7 support, see the back of the product for the

support number

8x8 Modular Matrix is a trademark of Gefen, LLC.

Important Notice

Gefen, LLC reserves the right to make changes in the hardware, packaging, and any

accompanying documentation without prior written notice.

All trademarks are the property of their respective owners.

Contacting Gefen Technical Support

3GSDI Audio Embedder

• There is no internal scaling in the 8x8 Modular Matrix. All of the attached monitors

must be able to display the output resolutions of the source devices. For maximum

compatibility it is recommended that only one compatible/common resolution be used

by all of the source devices.

• Routing features can be accessed using RS-232 or IP control. See RS-232 and IP

Conguration for more information.

• The 8x8 Modular Matrix provides several different pre-congured packages to suit the

needs of your application. This User Manual covers all available congurations. See

Pre-Congured Options for information on identifying the type of 8x8 Modular Matrix

that was purchased.

Operating Notes

8x8 Modular Matrix

Features

• Modular input and output card, each with eight connectors

• Supports resolutions up to 1920 x 1200

• Advanced EDID management for rapid integration of sources and displays

• RS-232 Serial interface for remote control via a computer or automation control

system

• IP port for control via built-in web server, Telnet, or UDP

• IR control via front panel sensor and rear panel IR port

• Front-panel LCD display

• Front-panel push buttons for local switching

• Routing states can be stored and recalled at the touch of a button

• Dual redundant hot-swappable power supplies

• Removable and replaceable fan and lter modules

• Output masking command

• Rack-mountable

Packing List

See Pre-Congured Options for packing list details for each pre-congured option. If any

of these items are not present in your box when you rst open it, immediately contact your

dealer or Gefen.

8x8 Modular Matrix

Features and Packing List

1080P

3GSDI Audio Embedder8x8 Modular Matrix

Table of Contents

viii

01 Getting Started

Pre-Congured Options......................................................................................... 2

Panel Layout ......................................................................................................... 6

Front Panel.................................................................................................... 6

Back Panel .................................................................................................... 7

IR Remote Control Unit ......................................................................................... 8

Front.............................................................................................................. 8

Back .............................................................................................................. 9

Installing the Battery.................................................................................... 10

Setting the IR Channel ................................................................................ 10

Installation ............................................................................................................11

Sample Wiring Diagram .............................................................................. 11

GEF-MOD-848-DVI..................................................................................... 12

GEF-MOD-848-DVIELR.............................................................................. 12

GEF-MOD-848-ELR.................................................................................... 14

GEF-MOD-848-DVI1FO.............................................................................. 16

GEF-MOD-848-1FO.................................................................................... 18

DisplayPort Package Options ..................................................................... 20

02 Operating the

8x8 Modular Matrix

Front Panel Controls ........................................................................................... 24

Front Panel Buttons .................................................................................... 24

Front Panel LCD Screen ............................................................................. 25

Displaying Matrix Settings........................................................................... 26

Routing Basics .................................................................................................... 27

Routing Inputs to Outputs ........................................................................... 27

Getting the Current Routing Status ............................................................. 29

One-to-One Routing.................................................................................... 30

Saving the Current Routing State ............................................................... 31

Recalling a Saved Routing State ................................................................ 33

Masking............................................................................................................... 35

Masking Outputs ......................................................................................... 35

Getting the Current Masking Status ............................................................ 37

Unmasking Outputs..................................................................................... 38

Locking the Matrix ............................................................................................... 40

EDID Management.............................................................................................. 41

Saving the Downstream EDID to an Input .................................................. 41

Saving the Default EDID to an Input ........................................................... 44

Resetting the Matrix ............................................................................................ 46

IR Control ............................................................................................................ 47

Routing Sources using the IR Remote Control Unit.................................... 47

Using the IR Extender ................................................................................. 48

8x8 Modular Matrix

Table of Contents

03 Advanced Operation

RS-232 and IP Conguration .............................................................................. 52

RS-232 Interface ......................................................................................... 52

RS-232 Settings .......................................................................................... 52

IP / UDP Conguration................................................................................ 53

RS-232 / IP Commands ...................................................................................... 54

EDID Management...................................................................................... 54

IP / UDP Conguration................................................................................ 64

Routing and Masking .................................................................................. 72

System ........................................................................................................ 82

Web Interface ...................................................................................................... 94

Using the built-in Web Server ..................................................................... 94

Routing ► Routing...................................................................................... 95

Routing ► I/O Names ............................................................................... 100

Routing ► +5V.......................................................................................... 101

Routing ► Output Masks .......................................................................... 103

Status ► In / Out....................................................................................... 105

Status ► System ...................................................................................... 106

Manage EDID ► Assign ........................................................................... 107

Manage EDID ► Bank Names ................................................................. 110

Manage EDID ► Upload / Download........................................................ 111

Conguration ► Change IP Settings ........................................................ 112

Conguration ► TCP / Telnet Terminal Login Settings ............................ 113

Conguration ► UDP Connection Settings .............................................. 114

Conguration ► Web Login Settings ........................................................ 115

Conguration ► System Conguration..................................................... 116

04 Appendix

Card Removal and Installation .......................................................................... 120

Firmware Upgrade Procedure........................................................................... 123

Specications .................................................................................................... 127

8x8 Modular Matrix.................................................................................... 127

Modular Matrix 8 DVI Input Card............................................................... 128

Modular Matrix 8 DisplayPort Input Card .................................................. 128

Modular Matrix 8 ELR Input Card.............................................................. 128

DVI ELR Sender with POL ........................................................................ 129

Modular Matrix 8 FO Input Card................................................................ 129

DVI Sender over 1 FO............................................................................... 130

Modular Matrix 8 DVI Output Card............................................................ 130

Modular Matrix 8 ELR Output Card........................................................... 130

DVI ELR Receiver with POL ..................................................................... 131

Modular Matrix 8 FO Output Card............................................................. 131

DVI Receiver over 1 FO ............................................................................ 131

Andere Handbücher für GEF-MOD-848-DVI

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Gefen Pro Netzwerk-Router Handbücher

Gefen Pro

Gefen Pro GEF-DVIKVM-848DL-PB Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise