Gefen EXT-VGAAUD-444 Bedienungsanleitung

www.gefen.com

4x4 VGA Matrix

EXT-VGAAUD-444

User Manual

Technical Support:

Telephone (818) 772-9100

(800) 545-6900

Fax (818) 772-9120

Technical Support Hours:

8:00 AM to 5:00 PM Monday thru Friday.

Write To:

Gefen Inc.

c/o Customer Service

20600 Nordhoff St

Chatsworth, CA 91311

www.gefen.com

[email protected]

Notice

Gefen Inc. reserves the right to make changes in the hardware, packaging and

any accompanying documentation without prior written notice.

4x4 VGA Matrix is a trademark of Gefen Inc.

All trademarks are the property of their respective companies

ASKING FOR ASSISTANCE

Rev A1

CONTENTS

1 Introduction

2 Operation Notes

3 Features

4 Panel Layout

5 Panel Descriptions

6 Connecting And Operating The 4x4 VGA Matrix

7 RMT-16IR Remote Description

8 4x4 VGA Matrix Remote Installation

10 Rack Mount Installation

11 Speciﬁcations

12 Warranty

Congratulations on your purchase of the 4x4 VGA Matrix. Your complete

satisfaction is very important to us.

Gefen

Gefen delivers innovative, progressive computer and electronics add-on solutions

that harness integration, extension, distribution and conversion technologies.

Gefen’s reliable, plug-and-play products supplement cross-platform computer

systems, professional audio/video environments and HDTV systems of all sizes

with hard-working solutions that are easy to implement and simple to operate.

The Gefen 4x4 VGA Matrix

The Gefen 4x4 VGA Matrix offers ﬂexibility and convenience by routing high-

quality VGA and analog audio from any of four VGA/audio sources to any of 4

VGA displays and audio devices.

The Gefen 4x4 VGA Matrix works with a wide variety of VGA sources such as

computers, security cameras and DVRs. Every source is accessible at any time

by any display by selecting it with the included IR remote, front panel buttons, or

RS-232 control.

How It Works

Connect up to four VGA and analog audio sources to the 4x4 VGA Matrix’s

inputs. Connect the Matrix’s VGAand analog audio outputs to 4 VGAdisplays

and audio devices. Plug in the Matrix’s power supply. You may now switch VGA

and audio sources using the included IR remote, front panel buttons, or the built-

in RS-232 serial port. LED lights on the front panel show the currently selected

routes from the VGA sources to the VGA displays.

INTRODUCTION

READ THESE NOTES BEFORE INSTALLING OR

OPERATING THE 4X4 VGA MATRIX

• The 4x4 VGA Matrix does not transmit display information (EDID) to the

source. Standard VESA resolutions should be output by most computers

without the need of an EDID. If using a non-VESA standard resolution or

if EDID is needed, an EDID storage and relay device is necessary. Gefen

recommends the use of a DVI Detective (part# EXT-DVI-EDIDN) with two

VGA to DVI adapters.

OPERATION NOTES

Features

• Switches easily between any four VGA/analog audio sources

• Sends up to four VGA inputs with analog audio to any four displays with

analog audio

• Supports high-deﬁnition VGA up to 1920 x 1200 resolution at 60 Hz

• LED lights on the front panel show selected VGA routes

• RS-232 Control

• Includes discrete IR remote control

Package Includes

(1) 4x4 VGA Matrix

(4) 6-Foot Vga Cables (M-F)

(4) 6-Foot Mini-Stereo 3.5mm Analog Audio Cables

(1) 24V DC Power Supply

(1) RMT-16IR Remote Control

(1) Set Of Rack Ears

(1) User’s Manual

FEATURES

Front Panel

Back Panel

11 12 13 14 15 16 17 18

20 24

21 25

22 26

23 27 28

2 3 41

PANEL LAYOUT

1-4 Selected Input LED Indicators For Outputs 1-4

There is a set of 4 LEDs for each of the four output ports. Each of the four

labeled outputs have a set of 4 individual LEDs that will indicate which input

source is active for that output. The currently selected input will be indicated

by an active LED.

5 IR (Infrared) Receiver

This receiver will accept commands for switching between HDMI input

devices using the included RMT-16IR remote control.

6 Power/Standby Button

This button will toggle the unit between on and standby modes.

7-10 Input Selection Button For Outputs 1-4

This button will set the source for the indicated output. Each labeled output on

the front panel has this button. Each press of this button will cycle through the

four input sources that will be routed to the output.

11-14 Audio Inputs For Inputs 1-4

This 3.5mm mini-jack analog stereo input will accept a single audio source for

routing to the outputs. There are four inputs, one for each VGAinput.

15-18 Audio Output For Outputs 1-4

This 3.5mm mini-jack analog stereo output will accept a single ampliﬁed audio

device. There are four outputs, one for each VGAoutput.

19 RS-232 Serial Communications Port

This DB-9 serial communications port is used with RS-232 devices for various

routing and functions.

20-23 VGA Inputs 1-4

These inputs will accept a single VGAsource device. Any of these four VGA

inputs can then be routed, in any combination, to the four VGAoutputs.

24-27 VGA Outputs 1-4

These outputs will accept a single VGAoutput device. Any of these four VGA

outputs can select and view one of the four VGAand audio inputs.

28 24V DC Power Receptacle

Connect the included 24V DC power supply between this port and an open

wall power receptacle.

PANEL DESCRIPTIONS

How to Connect the 4x4 VGA Matrix

1. Connect up to 4 VGA video sources to the 4x4 VGA Matrix inputs using the

supplied VGA cables.

2. Connect up to 4 analog audio sources to the 4x4 VGA Matrix audio inputs

using the supplied 3.5mm mini-jack stereo audio cables.

3. Connect up to 4 VGA capable displays to the 4x4 VGA Matrix outputs using

user supplied VGA cables.

4. Connect up to 4 ampliﬁed analog audio devices to the 4x4 VGA Matrix audio

outputs using user supplied 3.5mm mini-jack stereo audio cables.

5. Connect the included 24V DC power supply to the 4x4 VGA Matrix and an

open wall power socket.

How to Connect the 4x4 VGA Matrix

Routing of video to displays is done using Connect up to 4 analog audio sources

to the 4x4 VGA Matrix using the supplied 3.5mm mini-jack stereo audio cables.

either the included RMT-16-IR remote control or the direct select buttons located

on the front panel of the 4x4 VGA Matrix.

Using the RMT-16-IR remote control

The RMT-16-IR remote control uses 16 buttons to select 1 of 4 sources for each

output to view. Each output has a grouping of 4 buttons allocated for selecting

the individual sources. Use the chart below to route video to your desired display

NOTE: How to Operate the 4x4 VGA Matrix

Using the Direct Source Buttons

Each output on the 4x4 VGA Matrix has a push-button located on the front panel.

Pressing this button will cycle through the 4 input sources. Press the button for

each display repeatedly to select the desired source for viewing on that output.

RMT-16-IR

Button Source Output

111

221

331

441

512

622

732

842

RMT-16-IR

Button Source Output

913

10 2 3

11 3 3

12 4 3

13 1 4

14 2 4

15 3 4

16 4 4

CONNECTING AND OPERATING THE 4X4 VGA MATRIX

1. Remove battery cover from the back of the RMT-16-IR remote.

2. Verify that DIP switches 1 & 2 are in the down (OFF) position.

3. Insert the battery, hold the battery so that you can see the positive side facing

up. The side that is not marked must be facing down.

4. Test the RMT-16-IR remote by pressing ONLY one button at a time. The

indicator light on the remote will ﬂash once each time you press a button.

WARNING: Do not press multiple buttons simultaneously and do NOT press buttons

rapidly. These actions will cause the remote to reset and steps 1-4 will have to be

repeated.

NOTE: The RMT-16-IR ships with two batteries. One battery is required for

operation, the second battery is complimentary.

RMT-16IR REMOTE DESCRIPTION

Andere Handbücher für EXT-VGAAUD-444

Inhaltsverzeichnis

Andere Gefen Matrix-Umschalter Handbücher

Gefen

Gefen EXT-DVI-16416 Bedienungsanleitung

Gefen

Gefen GEF-DVI-16416-PB Bedienungsanleitung

Gefen

Gefen GEF-3GSDI-16416-PB Bedienungsanleitung

Gefen

Gefen EXT-HDMI1.3-444 Bedienungsanleitung

Gefen

Gefen GEF-DVI-16416 Bedienungsanleitung

Gefen

Gefen EXT-HDMI1.3-444 Bedienungsanleitung

Gefen

Gefen ex-tend-it 4x4 HDTV Matrix Bedienungsanleitung

Gefen

Gefen EXT-RMT-MATRIX-444 Bedienungsanleitung

Gefen

Gefen EXT-DVI-444DL Bedienungsanleitung

Gefen

Gefen GTB-HDFST-848 Bedienungsanleitung

Gefen

Gefen EXT-HDMI1.3-848CPN Bedienungsanleitung

Gefen

Gefen GEF-HDFST-848-4ELR Bedienungsanleitung

Gefen

Gefen EXT-HDMI-CAT5-444 Bedienungsanleitung

Gefen

Gefen EXT-COMPAUD-44424 Bedienungsanleitung

Gefen

Gefen DVI-444DL Bedienungsanleitung

Gefen

Gefen GTB-HD4K2K-848-BLK Bedienungsanleitung

Gefen

Gefen EXT-DVI-444DL Bedienungsanleitung

Gefen

Gefen EXT-UHD600A-88 Bedienungsanleitung

Gefen

Gefen EXT-HDMI-242 Bedienungsanleitung

Gefen

Gefen GEF-DVI-32432 Bedienungsanleitung

Gefen

Gefen DVI-444N Bedienungsanleitung

Gefen

Gefen GTB-HDFST-444 Bedienungsanleitung

Gefen

Gefen GEF-DVI-848DL-PB Bedienungsanleitung

Gefen

Gefen EXT-HDMI-CAT5-844 Bedienungsanleitung

Beliebte Matrix-Umschalter Handbücher anderer Marken

Broadcast Tools

Broadcast Tools SS 8.2 Bedienungsanleitung

Altimium

Altimium MATF32 Bedienungsanleitung

ALFAtron

ALFAtron ALF-MUK44N Bedienungsanleitung

Monoprice

Monoprice Blackbird 15377 Bedienungsanleitung

Kramer

Kramer XL 3216VS Bedienungsanleitung

PTN

PTN FMX12 Bedienungsanleitung

CYP

CYP nT15GX01 Bedienungsanleitung

Kramer

Kramer VP-2x2 Bedienungsanleitung

Kramer

Kramer Sierra Video 6432V5xl Bedienungsanleitung

TESmart

TESmart HMA0402A40 Bedienungsanleitung

Octava

Octava HD4XSTPMX Bedienungsanleitung

Intelix

Intelix FLX-88 Betriebsanleitung

Kramer

Kramer LASSEN XL 3232S Bedienungsanleitung

Roland

Roland XS-1HD Bedienungsanleitung

Kramer

Kramer VS-66HDCPxl Bedienungsanleitung

Atlona

Atlona AT-HDMI-22M Bedienungsanleitung

Link

Link HD8X8 Bedienungsanleitung

AMX

AMX AVS-OP-2020-117 Anleitungen und Rezepte