Gefen VGA-2-DVISP Bedienungsanleitung

VGA To DVI

Scaler PLUS

USER MANUAL

www.gefen.com

ASKING FOR ASSISTANCE

Technical Support:

Telephone (818) 772-9100

(800) 545-6900

Fax (818) 772-9120

Technical Support Hours:

8:00 AM to 5:00 PM Monday through Friday PST

Write To:

Gefen Inc.

C/O Customer Service

20600 Nordhoff St.

Chatsworth, CA 91311

[email protected]

www.gefen.com

Notice

Gefen Inc. reserves the right to make changes in the hardware, packaging and any

accompanying documentation without prior written notice.

VGA To DVI Scaler Plus is a trademark of Gefen Inc.

TABLE OF CONTENTS

Introduction1.

Features2.

Panel Descriptions3.

Connecting and Operating the VGA to DVI Scaler4.

Menu Functions5.

Troubleshooting6.

Speciﬁcations7.

Warranty8.

INTRODUCTION

Congratulations on your purchase of the Gefen VGA to DVI Scaler Plus. Your com-

plete

satisfaction is very important to us. Gefen’s line of KVM (Keyboard Video & Mouse),

DVI, ADC, USB, switches, extenders, converters and hubs is designed to make

computer use more comfortable, more productive and less expensive.

KVM switches allow access to multiple computers from a single keyboard, while the

extenders give the user control over a computer up to 330 feet away from the work

area.

The line offers solutions for noise, space and security concerns, data center control,

information distribution, conference room presentation, and school and corporate

training environments.

Our Commitment

Gefen will always offer the ﬁnest quality product at the best possible price. Included

in that price is a lifetime of free support from a team of outstanding engineers.

Introduction

The VGA to DVI Scaler PLUS connects traditional analog video graphic cards (VGA)

to DVI compliant digital monitors. The VGAto DVI Scaler PLUS, enables users to

connect laptops or legacy PC computers equipped with HD-15 video connections,

to the new DVI (digital visual interface) video display format. The VGAto DVI Scaler

PLUS will also work with component video sources such as DVD players and set top

boxes.

FEATURES

Features

The input is analog PC or HDTV signal in the format of either RGBHV, YPbPr or• YCbCr.

The output is digital+analog PC or HDTV signal in the format of digital RGBHV• bit stream plus analog RGBHV, known as DVI-I (Integrated digital and analog)

The input resolution is automatically detected while the output resolution and• refresh rate can be selected through OSD menu and front panel push buttons.

48MB frame memory for frame rate conversion.•

Output picture adjustment on brightness, contrast, color, RGB level and H-V• position.

DVI output enables an all digital rendering of video without the losses• associated with an analog interface and is an ideal for use with digital display

such as LCD, Plasma and DLP projectors.

High performance Scaler that converts and scales analog RGB inputs to DVI-I• (digital or analog) outputs

Output resolution can be easily selected using the OSD (On Screen Display)•

Supports input/output computer resolutions up to 1920x1200 at 60Hz•

Supports HDTV resolution up to 1080p as input and output.•

Supports DDWG standard for DVI compliant monitors•

Aspect ratio control for native and full view modes•

Includes:

(1) VGA to DVI Scaler Plus

(1) 5V Power Supply

(1) 6 ft VGA cable (M-F)

(1) User’s Manual

DVI Output Menu Button

Level Adjustment/

Auto Adjust

Level Adjustment

Front view

Back view

VGA Input Power Supply

Input

Power Indicator

PANEL DESCRIPTIONS

CONNECTING AND OPERATING THE VGA TO DVI SCALER PLUS

How to Connect the VGA to DVI Scaler Plus

Connect your analog video card to the HD-15 female connector at the input side of

the VGA to DVI Scaler Plus. (Note: The Menu button of the VGAto DVI Scaler Plus

will not work without a source plugged in)

Connect the DVI (M-M) cable between the DVI connector on the digital display and

the DVI output of the VGA to DVI Scaler Plus.

Connect the power supply.

*Note: The default resolution is set to NATIVE mode.

Operating the VGA to DVI Scaler Plus

Button Function

MENU Shows and Hides the On Screen Menu /

Menu and Item Selection

+Moves menu cursor DOWN the menu /

Increases adjustment values

-Moves menu cursor UP the menu /

Decreases adjustment values

Hold MENU and unplug and re-plug the

power source. After you have done that,

you can release the MENU button

Resets scaler back to NATIVE resolution

of the display

Auto Adjust

Press the -button

Tunes picture to displays optimum

settings

Output resolutions that are supported:

VGA 480I 576I WXGA

SGA 480P 576P WSXGA

XGA 720P/60 720P/50 WUXGA

SXGA 1080I/60 1080I/50 2K/60

UXGA 1080P/60 1080P/50 NATIVE

PC Menu

Contrast:

Adjusts the picture contrast

Brightness:

Adjusts the picture brightness

H POS:

Adjusts the picture's Horizontal

Position

V POS:

Adjusts the picture's Vertical

Position

Clock:

Clock adjustment for focus

Phase:

Phase adjustment for focus

Scale:

Aspect ratio control

OSD (On Screen Display) Adjust Menu

H POS:

Adjusts the Horizontal Position

of the On Screen Display

V POS:

Adjusts the Vertical Position of

the On Screen Display

Timeout:

Controls the time the OSD stays

on the display

Background:

Controls transparency of OSD

Color Menu

Red:

Adjusts the picture's red color

saturation

Green:

Adjusts the picture's green color

saturation

Blue:

Adjusts the picture's blue color

saturation

Color Temp:

Adjust the color tone

System Information Screen

Source:

Displays what source is

connected

Input:

Displays the current Input

resolution

Output:

Displays the current Output

resolution

Version:

Displays the current Firmware

version

MENU FUNCTIONS

TROUBLESHOOTING

No Picture appears on bootup:

If no picture appears on bootup, ﬁrst reset the VGA to DVI Scaler Plus to the native

mode of the display it is connected to.

Monitors without an internal scaler (Any Apple Display as well as the Dell 30"

monitor) require the VGA to DVI Scaler Plus to output the monitor's exact native

resolution to display a picture. To set the Scaler to the correct resolution, do the

following:

Reset the scaler to the native resolution of the display by ﬁrst holding down the1. MENU button.

While holding the2. MENU button down remove the power supply from the scaler.

Note: The MENU button does not work without a source plugged in.

Wait 3 seconds and re-plug the power supply to the unit.3.

After you have inserted the power supply, let go of the4. MENU button.

Wait 3 seconds and the scaler will then reset to the displays native resolution.5.

If you need to start over for any reason, unplug and re-plug the power on the6. VGA to DVI Scaler Plus and then repeat steps 1-5.

How to use the Auto-Adjust:

If for any reason you need to Auto-Adjust the display, you can do so by pressing1. the "-" button once. Give the scaler 3 seconds to Auto-Adjust itself.

While the unit is powered on, press the - button with both source and display2. connected and powered on as well.

Wait three seconds for the unit to adjust itself to the displays optimum settings.3.

After you have pressed the - button, a small dialog box will appear to show that4. you are auto-adjusting the picture. It will disappear when the scaler is done.

DVI Video Ampliﬁer Bandwidth.......................................................................165 MHz

VGAAmpliﬁer Bandwidth................................................................................350 Mhz

Input Video Signal

RGBHV...............................................................................................0.7 Vp-p 75 ohm

H/V........................................................................................................3 to 5 Vp-p TTL

Y.............................................................................................................1 Vp-p 75 ohm

Pb/Cb, Pr/Cr.......................................................................................0.7 Vp-p 75 ohm

Input DDC Signal...............................................................................5 Volts p-p (TTL)

DVI Connector.............................................................................DVI-I (29 pin) female

VGA Connector..........................................................................................HD-15 male

Power Consumption.............................................................................10 Watts (max)

Power Supply......................................................................................................5V DC

Dimensions.......................................................................................5”W x 1”H x 3.5”D

Shipping Weight...................................................................................................2 lbs.

SPECIFICATIONS

Inhaltsverzeichnis

Andere Gefen Medienkonverter Handbücher

Gefen

Gefen EXT-DVI-2-VGAN Bedienungsanleitung

Gefen

Gefen GTV-HIDEFS Bedienungsanleitung

Gefen

Gefen GTV-AUDDEC Bedienungsanleitung

Gefen

Gefen EXT-UHD600A-12-DS Bedienungsanleitung

Gefen

Gefen DVI-2-HDSDISSL Bedienungsanleitung

Gefen

Gefen DVI-2-HDSDI Bedienungsanleitung

Gefen

Gefen Home Theater Scaler Bedienungsanleitung

Gefen

Gefen EXT-3GSDI-2-HDMI1.3S Bedienungsanleitung

Gefen

Gefen EXT-DVIKVM-LAN Bedienungsanleitung

Gefen

Gefen GTV-HTS-PRO Bedienungsanleitung

Gefen

Gefen ex•tend•it VGA to DVI Conversion Box Bedienungsanleitung

Gefen

Gefen EXT-HDSDI-2-HDMIS Bedienungsanleitung

Gefen

Gefen GEF-HDMI1.3-2-3GSDI Bedienungsanleitung

Gefen

Gefen GTV-DD-2-AA Bedienungsanleitung

Gefen

Gefen HDSDI-2-DVIL Bedienungsanleitung

Gefen

Gefen DVI-2-HDSDIS Bedienungsanleitung

Gefen

Gefen EXT-GSCALER-PRO EXT-GSCALER-PRO Bedienungsanleitung

Gefen

Gefen EXT-HDMI1.3-2-3GSDI Bedienungsanleitung

Gefen

Gefen GTB-HD-1080PSGTB-HD-1080PS-BLK Bedienungsanleitung

Gefen

Gefen GTV-DD-2-AA Bedienungsanleitung

Gefen

Gefen Home Theater Scaler PLUS Bedienungsanleitung

Gefen

Gefen EXT-HDMATE-S Bedienungsanleitung

Gefen

Gefen DVI-2-VGA Bedienungsanleitung

Gefen

Gefen HDMI Super Booster Plus Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung