Gefen EXT-USB-400FON Bedienungsanleitung
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
www.gefen.com
f
USB 400 FO
EXT-USB-400FON
User Manual
Technical Support:
Telephone (818) 772-9100
(800) 545-6900
Fax (818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM PST Monday thru Friday, PST
Write To:
Gefen LLC
c/o Customer Service
20600 Nordhoff St
Chatsworth, CA 91311
www.gefen.com
Notice
Gefen LLC reserves the right to make changes in the hardware, packaging and
any accompanying documentation without prior written notice.
USB-400FO is a trademark of Gefen LLC
All trademarks are the property of their respective owners.
© 2010 Gefen LLC, All Rights Reserved
All trademarks are the property of their respective companies
ASKING FOR ASSISTANCE
Rev A3
CONTENTS
1 Introduction
2 Operation Notes
3 Features
4 Sender Unit Panel Layout
5 Sender Unit Panel Descriptions
6 Receiver Unit Panel Layout
7 Receiver Unit Panel Descriptions
8 Connecting And Operating The USB-400FO Extender
9 Troubleshooting The USB-400FO Extender
14 Specifications
16 Warranty
1
INTRODUCTION
Congratulations on your purchase of the USB-400FO. Your complete satisfaction
is very important to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
Gefen’s reliable, plug-and-play products supplement cross-platform computer
systems, professional audio/video environments and HDTV systems of all sizes
with hard-working solutions that are easy to implement and simple to operate.
The Gefen USB-400FO
This new USB Extender supports all USB 2.0 devices, extending to 1640 feet
(500 meters) away from the USB source. The receiver end is also a four USB
2.0 hub.
By using fiber optic cables, the new USB-400FO extends a long distance from
the location of a computer. It provides an EMI interference-free solution for using
USB at remote locations.
How It Works
The USB-400FO sender unit is connected to the source using the supplied USB
short cable. The USB peripheral(s) are connected to the receiver unit at the
remote end. Two LC-terminated multimode fiber optic cables are used to link the
sender to the receiver. The Receiver unit must be powered by a 5V DC power
supply. The Sender unit is powered by the USB bus.
Applications
The USB-400FO is invaluable for applications where complete control of devices
is necessary when using USB when placing in restricted areas, such as medical
facilities and oil rigs. The USB-400FO will connect with any USB-compliant
peripheral in all operating systems supporting USB 2.0.
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE USB-400FO
This equipment is a new version replacing the existing part number,
EXT-USB-400FO, and can provide outstanding extension facilities for any device
or USB application that requires a peripheral connection over a distance, such as
a USB camera or USB hard drive, keyboard and mouse.
The USB-400FO works like a USB hub with extension capabilities over a distance of
up to 1,640 feet. This means, for example, that a remote USB sensor can be placed
at a safe distance from the sender unit in situations that demand this type of security.
The USB-400FO signal controls the keyboard, mouse, trackball and other USB
peripherals using send and receive units. The USB signal is extended by using
multimode fiber optic cabling.
• The USB-400FO units are housed in a metal box for better RF shielding.
• The USB-400FO uses dual multi-mode LC fiber optic cables to connect the
sender and receiver units.
• The USB-400FO units were designed to operate on any type of computer
where USB is used for peripherals.
• Use the computer’s USB port when using a local keyboard/mouse that is not
part of the extensions used with the USB-400FO sender unit.
• In order to operate the product properly, the USB-400FO Sender and USB-
400FO Receiver units must be connected, powered up, and fiber optic cables
installed between both units.
Requirements:
To complete the installation, you will also require the following items that are not
included with the product:
• USB 1.1 or 2.0 Compatible computer (host computer) with a USB compliant
operating system
• USB 1.1 or 2.0 Compatible device
• 2-strand fiber optic cable with Duplex LC connectors (if using surface cabling)
OR, 2-strand fiber optic cabling with two information outlets and two 2-strand
fiber optic patch cords with Duplex LC connectors (if using premise cabling)
Note: The maximum length of the multimode fiber optic cable (MMF) supported
by the USB-400FO system, including patch cords, is 500m on 50/125m MMF or
275m on 62.5/125m MMF.
OPERATION NOTES
2
3
FEATURES
Features
• “Extreme USB” technology is used to extend the range of USB 2.0 devices
up to 1640 feet (500 meters) using fiber-optic cables
• Receiver unit is also a USB 2.0 four-port hub
• Provides support for both low-speed and high-speed USB devices
• Fully backward-compliant with USB 1.1 and USB 2.0 specifications as
certified by the USB Implementer’s Forum
• Number of USB devices can be expanded using standard USB hubs
• Supports all operating systems including Windows®, Mac OS®, and Linux®
• Supports other USB peripherals and are used in devices such as PlayStation
and WII.
• A very secure method of USB control in areas where environmental
conditions prohibit access by people
• Ideal as optical isolation from over-voltage and static electricity
• Supports High Speed devices up to 480mb/s
Package Includes
(1) USB-400FO Sender
(1) USB-400FO Receiver
(1) USB Cable
(1) 5V DC Power Supply
(1) User’s Manual
4
SENDER UNIT PANEL LAYOUT
Front Panel
Back Panel
1
2
3
4
65 7
5
SENDER UNIT PANEL DESCRIPTIONS
1 Power LED (Blue)
LED turns on when power is supplied. Off when no power is supplied.
2 Link LED (Green)
Indicates a valid ExtremeUSB® link is established between the
Sender and Receiver
3 Host LED (Green)
Indicates that the system is properly enumerated on the host PC. LED blinks
when in suspend state.
4 Activity LED (Amber)
Indicates activity when data transmission is active between Sender and
Receiver. LED blinks intermittently with or without a USB device connected.
When the Sender and Receiver are in suspend mode, the LED is off.
5 Power port
An optional 5V power supply can be connected to the Sender unit to provide
power if the USB port on the host PC is not capable of delivering 500mA to the
unit.
6 USB Type B connector
Used to connect the Sender unit to the host computer.
7 Link Port (Duplex LC)
Extension link Duplex LC fiber optic transceiver port.
6
RECEIVER UNIT PANEL LAYOUT
Front Panel
Back Panel
3
4
5
6
8
7
1
2
7
RECEIVER UNIT PANEL DESCRIPTIONS
1 Port (USB Type A)
USB device input port
2 Device LED (Green/Orange)
Indicates when a USB device is connected to the Device Port. Solid green
when device is plugged in and active. Off when device is in a suspend mode
or Receiver unit is powered off. Orange when the Receiver unit detects an
overcurrent condition, or if the attached USB device attempts to draw more than
the 500mA current.
3 Power LED (Blue)
LED turns on when power is supplied. Off when no power is supplied.
4 Link LED (Green)
Indicates a valid ExtremeUSB® link is established between
the Sender and Receiver
5 Host LED (Green)
Indicates that the USB-400FO system is properly enumerated on the host PC.
LED blinks when in suspend mode.
6 Activity LED (Amber)
Indicates activity when data transmission is active between the Sender and
Receiver. LED blinks intermittently with or without a USB device plugged in.
When the Sender and Receiver are in a suspend mode, the LED is off.
7 Grounding point
Optional Earth Ground connection to housing of unit.
Accepts an M2 type screw.
8 Power port
Connects to the 5V DC power supply.
Required for proper operation.
9 Link Port (Duplex LC)
Extension link Duplex LC fiber optic transceiver port.
Andere Handbücher für EXT-USB-400FON
3
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Gefen Schalten Handbücher
Gefen
Gefen ToolBox GTB-MHDMI1.3-441 Bedienungsanleitung
Gefen
Gefen HD-241 Bedienungsanleitung
Gefen
Gefen 4K ULTRAHD EXT-UHD-88 Bedienungsanleitung
Gefen
Gefen DVI-422 Bedienungsanleitung
Gefen
Gefen EXT-DVIKVM-441DL Bedienungsanleitung
Gefen
Gefen EXT-DPKVM-422 Bedienungsanleitung
Gefen
Gefen EXT-DVI-841DL Bedienungsanleitung
Gefen
Gefen EXT-DVI-848 Bedienungsanleitung
Gefen
Gefen ex tend it4x2 HDMI Switcher Bedienungsanleitung
Gefen
Gefen EXT-DP-841 Installations- und Betriebshandbuch
Gefen
Gefen VGA Bedienungsanleitung
Gefen
Gefen ADC-241 Bedienungsanleitung
Gefen
Gefen 2x2 HDMI Switcher Bedienungsanleitung
Gefen
Gefen EXT-DVIK-MV-41 Bedienungsanleitung
Gefen
Gefen 2X2 VGA SWITCHER Bedienungsanleitung
Gefen
Gefen 8x8 EXT-DVI-848 Bedienungsanleitung
Gefen
Gefen DVIKVM-241SL Bedienungsanleitung
Gefen
Gefen EXT-HDMI1.3-341 Bedienungsanleitung
Gefen
Gefen SL Switcher Bedienungsanleitung
Gefen
Gefen EXT-HDMI1.3-244 Bedienungsanleitung
