Gema OptiSpray AP01.1-E Leitfaden
Rev. 03 1011 526 EN
Operating instructions and Spare parts list
Application pump
OptiSpray AP01.1-E
Translation of the original operating instructions
Rev. 03 01/21
Documentation OptiSpray AP01.1-E
© Copyright 2017 Gema Switzerland GmbH
All rights reserved.
This publication is protected by copyright. Unauthorized copying is
prohibited by law. No part of this publication may be reproduced,
photocopied, translated, stored on a retrieval system or transmitted in any
form or by any means for any purpose, neither as a whole nor partially,
without the express written consent of Gema Switzerland GmbH.
Gema, EquiFlow, MagicCompact, MagicCylinder, OptiCenter, OptiFlex,
OptiGun, OptiSelect and OptiStar are registered trademarks of Gema
Switzerland GmbH.
ClassicLine, ClassicStandard, ClassicOpen, DVC (Digital Valve Control),
GemaConnect, MagicControl, MagicPlus, MonoCyclone, MRS,
MultiColor, MultiStar, OptiAir, OptiControl, OptiColor, OptiFeed, OptiFlow,
OptiHopper, OptiMove, OptiSieve, OptiSpeeder, OptiSpray, PCC (Precise
Charge Control), RobotGun, SIT (Smart Inline Technology) und
SuperCorona are trademarks of Gema Switzerland GmbH.
All other product names are trademarks or registered trademarks of their
respective holders.
Reference is made in this manual to different trademarks or registered
trademarks. Such references do not mean that the manufacturers
concerned approve of or are bound in any form by this manual. We have
endeavored to retain the preferred spelling of the trademarks, and
registered trademarks of the copyright holders.
To the best of our knowledge and belief, the information contained in this
publication was correct and valid on the date of publication. Gema
Switzerland GmbH makes no representations or warranties with respect
to the contents or use of this publication, and reserves the right to revise
this publication and make changes to its content without prior notice.
For the latest information about Gema products, visit
www.gemapowdercoating.com.
For patent information, see www.gemapowdercoating.com/patents or
www.gemapowdercoating.us/patents.
Printed in Switzerland
Gema Switzerland GmbH
Mövenstrasse 17
9015 St.Gallen
Switzerland
Phone:+41-71-313 83 00
Fax.: +41-71-313 83 83
Rev. 03 01/21
OptiSpray AP01.1-E Table of contents
3
Table of contents
About these instructions 7
General information ................................................................................................7
Keeping the Manual................................................................................................7
Safety symbols (pictograms)...................................................................................7
Structure of Safety Notes...........................................................................8
Presentation of the contents...................................................................................8
Figure references in the text......................................................................8
Safety 9
Basic safety instructions .........................................................................................9
Product specific security regulations ....................................................................10
Product description 11
Intended use .........................................................................................................11
Reasonably foreseeable misuse...........................................................................12
Technical Data......................................................................................................12
Electrical data ..........................................................................................12
Pneumatic data........................................................................................12
Powder output (reference values)............................................................13
Dimensions ..............................................................................................13
Sound pressure level...............................................................................13
Rating plate..............................................................................................14
Design and function..............................................................................................15
Overall view..............................................................................................15
Powder hoses ..........................................................................................15
Spraying air function / diffusers................................................................16
Connections.............................................................................................17
Scope of delivery ..................................................................................................17
Typical properties - Characteristics of the functions.............................................18
Main functions..........................................................................................18
Secondary functions ................................................................................18
Conveying direction .................................................................................18
Powder hose rinsing ................................................................................18
Maintenance interval monitoring..............................................................19
Assembly / Connection 21
Assembly guide.....................................................................................................21
Connection instructions.........................................................................................22
Start-up 25
Preparation for start-up.........................................................................................25
Basic conditions.......................................................................................25
Basic information .....................................................................................25
Operation 27
Operation ..............................................................................................................27
Rev. 03 01/21
4
Table of contents OptiSpray AP01.1-E
Switching on and off the conveying procedure........................................ 27
Switching on and off the rinsing procedure............................................. 27
Maintenance / Repairs 29
General information.............................................................................................. 29
Maintenance of the dense phase pump............................................................... 30
Maintenance schedule............................................................................. 30
Daily maintenance................................................................................... 30
Pinch valve diagnostic............................................................................. 30
Wearing parts.......................................................................................... 30
Cleaning................................................................................................................ 31
Cleaning the Application pump (color change)........................................ 31
Periodic checks .................................................................................................... 31
Repair work........................................................................................................... 32
Replacing the pinch valve hoses and filter elements........................................... 32
Pump disassembly .................................................................................. 33
Replacing the pinch valve hoses............................................................. 34
Replacing the filter elements................................................................... 35
Replacing the solenoid valves for pinch valves control........................................ 36
Requirements on personnel carrying out the work.................................. 36
Replacing the solenoid valves................................................................. 37
Replacing the Application pump in an OptiCenter .................................. 40
Fault clearance 41
Decommissioning / Storage 45
Shutdown.............................................................................................................. 45
If in disuse for several days..................................................................... 45
Storage conditions................................................................................................ 45
Hazard notes........................................................................................... 45
Type of storage........................................................................................ 45
Storage duration...................................................................................... 45
Space requirements ................................................................................ 45
Physical requirements............................................................................. 46
Maintenance during storage................................................................................. 46
Maintenance schedule............................................................................. 46
Maintenance works.................................................................................. 46
Disposal 47
Introduction........................................................................................................... 47
Requirements on personnel carrying out the work.................................. 47
Disposal regulations................................................................................ 47
Materials.................................................................................................. 47
Disassembly of component groups...................................................................... 47
Spare parts list 49
Ordering spare parts............................................................................................. 49
OptiSpray AP01.1-E Application pump ................................................................ 50
OptiSpray AP01.1-E –spare parts....................................................................... 51
OptiSpray Twin AP01.1-E Application pump........................................................ 52
OptiSpray Twin AP01.1-E –spare parts .............................................................. 53
Connecting material.............................................................................................. 54
Diffuser (OptiGun GA03-E)................................................................................... 55
Diffuser (OptiSelect Pro GM04-E)........................................................................ 56
Diffuser (OptiSelect GM03-E)............................................................................... 57
Rev. 03 01/21
OptiSpray AP01.1-E Table of contents
5
Rev. 03 01/21
OptiSpray AP01.1-E About these instructions
7
About these instructions
General information
This operating manual contains all important information which you
require for the working with the OptiSpray AP01.1-E. It will safely guide
you through the start-up process and give you references and tips for the
optimal use when working with your powder coating system.
Information about the functional mode of the individual system
components should be referenced in the respective enclosed documents.
Keeping the Manual
Please keep this Manual ready for later use or if there should be any
queries.
Safety symbols (pictograms)
The following warnings with their meanings can be found in the Gema
instructions. The general safety precautions must also be followed as well
as the regulations in the relevant instructions.
DANGER
Indicates a hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
ATTENTION
Indicates a potentially harmful situation. If not avoided, the equipment or
something in its surrounding may be damaged.
Rev. 03 01/21
8
About these instructions OptiSpray AP01.1-E
ENVIRONMENT
Indicates a potentially harmful situation which, if not avoided, may have
harmful consequences for the environment.
MANDATORY NOTE
Information which must be observed.
NOTICE
Useful information, tips, etc.
Structure of Safety Notes
Every note consists of 4 elements:
–Signal word
–Nature and source of the danger
–Possible consequences of the danger
–Prevention of the danger
SIGNAL WORD
Nature and source of the hazard!
Possible consequences of the danger
►Prevention of the danger
Presentation of the contents
Figure references in the text
Figure references are used as cross references in the descriptive text.
Example:
"The high voltage (H) created in the gun cascade is guided through the
center electrode."
Rev. 03 01/21
OptiSpray AP01.1-E Safety
9
Safety
Basic safety instructions
–This product is built to the latest specification and conforms to the
recognized technical safety regulations and is designed for the
normal application of powder coating.
–Any other use is considered non-compliant. The manufacturer shall
not be liable for damage resulting from such use; the user bears sole
responsibility for such actions. If this product is to be used for other
purposes or other substances outside of our guidelines then Gema
Switzerland GmbH should be consulted.
–Start-up (i.e. the execution of intended operational tasks) is
forbidden until it has been established that this product has been set
up and wired according to the guidelines for machinery. The
standard "Machine safety" must also be observed.
–Unauthorized modifications to the product exempt the manufacturer
from any liability from resulting damage.
–The relevant accident prevention regulations, as well as other
generally recognized safety regulations, occupational health and
structural regulations are to be observed.
–Furthermore, the country-specific safety regulations also must be
observed.
Rev. 03 01/21
10
Safety OptiSpray AP01.1-E
Product specific security regulations
–This product is a constituent part of the equipment and is therefore
integrated in the system's safety concept.
–If it is to be used in a manner outside the scope of the safety
concept, then corresponding measures must be taken.
–The installation work to be done by the customer must be carried out
according to local regulations.
–It must be ensured, that all components are earthed according to the
local regulations before start-up.
For further security information, see the more detailed Gema
safety regulations!
WARNING
Working without instructions
Working without instructions or with individual pages from the
instructions may result in damage to property and personal injury
if relevant safety information is not observed.
►Before working with the device, organize the required documents
and read the section "Safety regulations".
►Work should only be carried out in accordance with the
instructions of the relevant documents.
►Always work with the complete original document.
Inhaltsverzeichnis
Andere Gema Wasserpumpe Handbücher
Beliebte Wasserpumpe Handbücher anderer Marken
Sykes AmeriPumps
Sykes AmeriPumps GP100M Fehlerbehebungshandbuch
DUROMAX
DUROMAX XP WX Series Bedienungsanleitung
BRINKMANN PUMPS
BRINKMANN PUMPS SBF550 Bedienungsanleitung
Franklin Electric
Franklin Electric IPS Bedienungsanleitung
Xylem
Xylem e-1532 Series Bedienungsanleitung
Milton Roy
Milton Roy PRIMEROYAL Bedienungsanleitung