Generac Power Systems 1019-3 Bedienungsanleitung

Owner's Manual

". | =*=

Generator

Wheel kit

Storage Cover

Battery

Battery Float Charger

Battery Charge Cables

Spare Spark Plug,Air Filter,and Oil Filter

Spark PlugWrench

(2) Locking 30 Amp Plugs

EngineOil

Owner's Manual

EngineManual

If any parts are missingor damaged,call 1-800-270-1408.

SafetyRules...................................... 2-4

Know Your Generator ............................... 5

Assembly........................................ 6-7

Operation ...................................... 8-13

Product Specifications .............................. 14

Maintenance...................................... 14

Storage.......................................... 15

Troubleshooting ................................... 15

Schematic........................................ 16

Wiring Diagram ................................... 17

Replacement Parts .............................. 18-22

Notes ........................................... 23

Warranty ................................... Last Page

Questions? Help is just a moment away!

Call:Generac Generator Helpline - 1-800-270-1408 M-F 8-5 CT

Web: www.generac-por tables.corn

EQUIPMENT

DESCRIPTION

_Read thls manual carefully and become

familiar with your generator. Know its

applications, its limitations and any hazards

involved,

The generators are an engine_riven, revolvTng field,

al:ernatTng current (AC) generator, It wzs designed _o

supply electrical power for operating compatible electrical

lighting, appliances, _ools and motor loads.The generator's

revolvTng field is drTvenat about 3,600 rpm by a single-

cylTnder engTne.

CAUTION! DO NOT exceed the generator's

wa_age/amperage c_pacfty. See ==Don't Overload

Genera_or" on page 13.

Every effor_ has been made _o ensure that fnforma_ion in

_his manual fs accurate and current, However, we reserve

the right to change, al_er or otherwfse improve the product

and thfs document at any tfme wfthout prfor no_ice.

The Emission Control System for this generator is

warranted for standards set by the Environmental

Pro_ecUon Agency. For warranty information refer to the

engine owner's manual.

!_ _h_ Sta_e of Californ! a aspzr_ zr_ster is _qu!_ d bylaw

(Sec:io_ 4_t2 of;he C_lifomi_ Public Resou_es Code).

Other S_es m_ _ave Sim!lar I_S. Fecle_l lawsZpply on

fede_l IzndSiIfYO_e_ip 1;hem_ffler _i_h Z spare arres_ r,

SAFETY RULES

_IL hls isthe safety alert symbol. It is used to

alert you to potential personal injury hazards.

Obey all safety messages that follow this

symbol to avoid possible injury or death.

The safety alert symbol (_) is used with a signal word

(DANGER, CAUTION,WARNING), a pictorial and/or a

safety message _o aler_ you _o hzzards. DANGER indicates

a hzzard which, if not avoided, vAf!result in death or serious

injury.WARNING indicates a hazard which, if n_t avoided,

could result in death or serious iniury. CAUTION

indicates a hzzard which, if not avoided, might result in

minor or moderate injury. CAUTION, when used

without the aler_ symbol, indicates asituation that could

result in equipment damage. Follow sat'e_ messzges to

avoid or reduce the risk of iniury or de_th.

WARNING

The engine exhaust from (;his produc_ contains

chemicals known to the State of Callfornla to cause

cancer, birth defects, or o_her reproductive harm,

Hazard Symbols and Meanings

Electrocu_Jon Electrical Shock Electrical Shocl(

Toxic Fumes

Explosive Pressure

E_plesfen Fire

Chemical Burn Hot Surface

DANGER

,when using_eneratorforbackuppowen,_i_0t(!i_

, use a ground Circuit fault interrup_ (G FCI) in any damp or

highly conductive area_such _s rnc'ta! d0tl_ng or s_¢l wet I_

No- useg_n_r_r_th _let_ieal_o_swhicha_worn

NOT h_.ndle generac0r or _!ettriea! COrds Whi!_ standing

in water, While bar_o0t_ 0n while hands Or"fec-_

"DO N_ a!!0w unqualified Persons or chi!dren _O OPerate or

DANGER

,Wc_r protettiye goF_!esirubberapron_and rubber g!oves.

WHEN ADDING FUEL

,Turn g¢:n¢:rat.or OFF and let ic cool _t least _-min_os

n_rn0vIng gas taPi Lo_en caP slowfi co mJieve PreSSUrein _n Ic

,DO NOT overfitl_n_AI!ow apacefor

,Keep furl away fr°m aparksi open fl_mes,pi!oc I!ghtsi hear. and

,This generator is not for usein mobile equipment 0r m_.rin_

WHEN TRANSPORTING OR REPAIRI NG EQUIPMENT

, Transpo_repair with rue! tank EH_ or wi_h rue! shut_

, Disconnec_ apark plug wire:

WHEN STORING FUEL OR EQUIPMENT WITH FUEL

dryers or Other appliantes that h_ve pilot ligh_or Other

ignitionsouse _¢_uso thc_ican i_nitefuelvapo_

_WARNING

,This generator does not meet U.S.C_st Gua_ Regu]ad0n

33CFR=!83 _nd should not b_ used on marine _pplit_tions

,F_.ilur'__ USe=he,_.ppropri,_te OiSi GO_t Guard

genera_t, could _osult in bodily inju_ _nd/or prope_

CAUTION

,Al!ow eClurpm_ntto ¢ool befo_ _ouching

CAUTION

'Se_!'D0n!t Over!oad G_n_rac0r'' on page13.

, $_.rt generator and le_._ngine scabflfzebefor_ ¢0nne_ing

_l_ric_l I_dSi

! c0nn_=_I_C_I JOadS!nOFFpOS.sO,__he,__umONfo_

Opera'don.

, "-urn d_ccr!_l loads OFI: and d!sc0nn_¢cfrom generacor

CAUTION

'USegen_racOronly for incend_cluses.

'li_U h_-veqUe_'c(ons_-bOUCincendedU_eiaskd_io_ 0rC_-iI

,DO NOT expose g_ner_tor tOexCeS$(WmoiscU_i dust.dirt:_

' DO NOT inser__.n_Obj_ct_through €oolingsio_i

,i_¢0nnc_t.oddcv(cesoverhc_ti_um_h_m Off_nd disc0nnec_

,Shutc_ _n_ra_ot" if:

_l_ri_! 0utpu_ islost;

-un(€vibrat_s_Cossivoly.

KNOW YOUR G EN ERATOR

Read this owner's manual and safeb/rules before operating your genera_or,

Compare the illustratTons wi_h your genera_or, to familiarize yourself wT_ the Io_ions of various controls and

adjustments. S_¢ethis manual for future reference.

CTrcuit Breakers (AC) FuelTank

12Volt DC

Receptacle

Choke Lever

120/240VoltAC,

30 Amp Locldng

Receptacle

120VoltAC, 30Amp

Locl_TngReceptacle

120VoltAC, 20 Amp

Duplex Recep_cle

rl_Arres_er M_ffler

120/240VoltAC,

50 Amp Receptacle

GroundingF_stener

12Volt DC ReceptaCle LJse :his _ceP_€!e W!_h Ch0_ Leve r _ Used whe_ staring a c01d e_gi_e i

bat_e_ Charge cables_Charge a l2Vo!t b_ery, CirCUit Breake_ (AC)Each receptacle is provided

Am Ou exRete t=ucle_M be wth_ ush_orese_ clrcul_bre_k_r_oprotectd_

i20V°lt AC' 20 P P P i _Y ......... P: .... _ ...... ": 0ver d_d ........ ........... :

.......... gener_r" zga!_S:e!e_r!_ .... :.............

i20 volt ACi Single ph_e, 60 HZ eiectri_l lighti_gi Epplia_¢e, FUel Tank _CapaCity OfSeven (7)UiSi gaii0_S.

20VoitAC 30Am Lockin ........... ...................... :........... :

i, [p Ground n_ Fastener _If reci_fred p!ease consul_ a

usedtosuppyelectrica ower for the epera_Jon of ......... ,...... :" ,. I.... _ ..... :

20VotAC 30Amp, sngle phase bu.z elec_rica_I=g_ti g,....... _avi_ :UrSd ct0_ ........... :...................... :..............

............

! 20!240 Volt ACi 30 Amp I-ocldng Receptac!e _ ay at _brm_l (_igh)Speeds When the_ is _i0_d p_Se_ _nd

be used _ suppl_ e!ec_ic_l Power fop _he the engine at idle _I0W)Speeds whe_a 10ad i_ not

20 _ndt0r 240Vo_AC 30Amp S _gle:ph_e 60Hz Lrese_ ....................... :...........

eiec_H_i lighting;appliance, t001Z_d m_;0ri0adsi F

S0 Amp, snge phase,_O Hz e ec_r cal loads Run/S_op Switch -- _st be in "Run" posiUon to sta_

mengTneSette Stop tostoparunnmge_g e

Am Cleaner Uses a dry O/pe fTiter:element and lea , !

pre c e_er to EXhauSt muffler 10wets engine

into d_eenginei _oise _d is_Uipped Wi_h Z spzrP.Zrrester

ASSEMBLY

Your generator requires some assembly and is ready for

use at_er it has been properly serviced with the

recommended oil and fuel.

If you have any problems with the assembly of your

generator, please call the generator helpllne at

1-800-270-1408.

IMPORTANT:Any a_empt to run the unit before it hzs

been serviced with the recommended oil will result in an

engine failure.

Remove Generator From Carton

I, Set _rton on a rigid flat surface with "This Side Up"

arrows pointing upward.

2. Carefully open top flaps of shipping car_on. Review

"Cold Weather Operation" on pzge 10.

3. Cut down corners at one end of _rton from top to

bo_om and laythat side of _rton down tla=

4. Remove all pacl(Tngmaterial, car_on fillers, etc.

S. Remove the generator from the shipping carton.

Install Wheel Kit

The wheel Idt is designed to greatly improve the por_bili_

of your generator.

NOTE:Wheel kit is not intended for over-the-road use.

You will need a socket wrench with I/2" or 13ram socl(ets

and a needle-nose plier to instil this kit,

Refer to Figure I and install the wheel kit as follows:

I. Place the bo_om of the generator cradle on aflat,

even surface.Temporarily place unit on bloc_ to e_se

assembly.

2. Slide zxle through both axle mounting brackets on

cradle frame, as shown in Figure I.

3. Slide a wheel over the axle.

NOTE: Be sure to install both wheels with the air

pressure valve on the outboard side.

4. Place the e-ring onto the groove in the axle.You may

add the flat washer if desired.

NOTE: Use retaining pins instead of e-clip, if appli_ble.

5. Place one end of the needle nose pliers on the bot_m

of the axle and the other end of the pliers on top of

the e-ring. Seat the e-ring by pressing the pliers closed.

6. Repeat step 3through 5 to secure second wheel.

II vv

7. Removetie _emporary blocks.

8. At_ch the vibration mourns to the support leg with

30ram capscrews, washers and lock nuts,

9, With the wheels on, you can now Hft up the handle

end and a_ch tie suppor_ leg wTth 20ram cap screws

and lock nuts.

IO, Check tiatallfastenersarerightznd thetiresare Tnfla_d

_o tile value marked on tile tTre or wTthin IS and 40 psT.

Check Battery /Attach Negative

Battery Wire

The sealed battery on the generator is fully charged and

pre-Tns_lled except for the negative (blacl_) battery cable,

To install;

I. Cut off _ie wrap securing loose end of negative (black)

c_ble.

2, Remove nut and washer on negative bakery terminal,

3, Slide negative battery cable over screw on negative

_erminal (Figure 2),

Negative

battery \_

c_ble Screw Positive battery cable

_t. Re_ch wzsher and nut and tighten,

5. Verify tiat connections to bakery and generator are

_Jghtand secure,

BEFORE STARTING THE

ENGINE

Add Engine Oil and Fuel

•Place generator on a level surface.

• Refer to engfne owner's manual and follow ofl and fuel

recommendations and instructions,

CAUTION

NOTE: Checl_ oil often during engine break-in, Refer to

engine owner's manual for recommendations,

NOTE: The generator zssembly rotates on a prelubricated

and sealed ball bearing that recIuires no additional

lubrication for the life of tie bearing,

USING THE GENERATOR

System Ground

The generator has a system ground :hat connects the

generator frame components _o the ground terminals on

the AC output recep_cles.The system ground is connected

_o the AC neutral wire (see "EquTpment DescrTpdon",

earlier in thTs manual).

Special Requirements

There may be Federal or $_te OccupatTonal Safety and

Health AdmTnTstratTon(OSHA) regulations, local codes, or

ordinances that apply _o the in_ended use of the generator.

Please consult aqualifTedelectrician, electrical inspector, or

the local zgency having jurisdiction.

• In some areas, generators are required to be registered

with local utili_/companies.

•It'the generator is used at a construction site, there may

be additional regulations which must be observed.

Connecting to a Building's Electrical

System

Connections for s_ndby power to a building's electrical

system must be made by aqualified electrician.The

connection must isolate the generator power from u_ility

power, and must comply with all applicable laws and

electrical codes. DANGER

,wh_, usi,g_o,o_tor_orbackupp0*o_,,_i_

,Use aground_UI_Circuit interrUp_ (G FCI) in anydamp or'

highly ¢0nducciye arca_suchRsmG_a!d_€l_ngor' s_¢l wor`I_

N_ h_ndl_gcn_r_cOr`Or'_!ec_rica!cordsWhi!_s_nding

W_rer,Whi]_b_oo_ Orwhileh_.nd_.Or _ec_

N_ a!!owunqualified_mons or chi]d_nro op_ or

How to Use the Battery Charger

Use bakery float charger iack to I_s_ep:he sr_r_ing battery

charged and ready for use. B_t_ery charging should be done

in adry Ioc_ion, such as inside a g_rage.

•Plug the charger into the unit's"Battery Float Charger"

jack, which is located on the s_rter switch (Figure 3).

Plug ba:tery charger into a 120VoltAC wall recep_cle.

• Unplug :he charger from :he unit and the wall ouder when

generator is being s_r_ed and while it is in operation.

•Keep this charger plugged in when generator is not in

use to prolong battery life.The charger has a built in float

ecIualizer and will not overcharge the b_tery, even when

plugged in for an ex_ended period of time.

IN PORTANT: See "B_ery Maintenance" on pzge 14 for

additional information.

OPERATING THE

G EN ERATO R

IN PORTANT: Always unplug the battery float charger

before star_ing :he generator.

CAUTION

S_ [DOnt_erlo_.d GCner_t:or_on pa_¢ 3;

"S_ _ne_t:or _.nd!et__ngin_ s_bi!!ze_before €onn_ct:ing

electrical Ic_dSi

, C0nn_c__l_¢tr!cal !0ads !n OFF p0sitJon,rhen turn ON for`

,Turn oJf:ccr(_.lloadsOFF andd(sconn_¢cfrom generator

Starting the Engine

Disconnect all electrical loads from the generator, Use the

following s_r_ instruction steps by numerical order:

I, Make sure unit is on a level sur_ce,

IMPORTANT= Failure to star_ and operate unit on alevel

sur_ce will c_use the unit not _o start or shut down during

operation.

2. Turn the fuel valve to the "On" position (Figure 4).The

fuel valve handle should be vertical (pointing toward

_he ground) for fuel to flow.

3. Mal__esure the Idle Control switch is in "Off" position

(Figure 5).

_m BI

IDLE

4. Start the engine according to instructions given in 1:he

engine owner's manual.

NOTE: If engine starts after 3 pulls but f_ils to run, or if

unit shu_sdown during opera_ion, mal_ sure unit is on a

level su_ace and check for proper oil level in crankcase.

This unit mm/be equipped wi_h alow oil protection device.

See engine manual.

Connecting Electrical Loads

•Let engine s_bilize and warm up for a few minu_es after

starting,

• Plug in and turn on the desired 120 and/or 240VoltAC,

single phase, 60 Hz electrical loads.

• DO NOT connect 240Volt loads to the 120Volt

recep_cles.

• DO NOT connect 3-phase loads to the generator.

• DO NOT connect 50 Hz loads _o _he generator.

•DO NOT OVERLOADTHE GENERATOR, See

"Don't Overload Generator" on page 13.

Stopping the Engine

I. Unplug all electrical loads from generator panel

recep_cles. NEVER star_ or stop engine with electrical

devices plugged in and turned on.

2. Put idle control switch in "OFF' position.

3. Let engine run at no-load for 30 seconds _o stabilize

in_ernal _empera_uras of engine and generator.

4. Turn engine off"according to instructions given in

engine owner's manual.

S. Move fuel valve to "OFF' position.

Operating Automatic Idle Control

This switch is designed to greedy improve fuel economy.

When this _wltch is turned ON, the engine will only

run at i_snormal high governed engine speed when an

electrical load is connected,When an electrical load is

removed, the engine will run at a reduced speed. With the

switch off, the engine will run at _he normal high engine

speed. Always have the switch off when starting and

stopping the engine.

Charging a Battery

Your generator has _he capability of recharging a discharged

12Volt automotive or utiliL-ystyle storage battery. DO

NOT use the unit _o charge am/6Volt batteries. DO NOT

use the unit _o crank an engine having a discharged battery.

DANGER

To recharge 12Volt bat_rles, proceed as follows:

I. Check fluid level in all bat%erycells. If necessary, add

ONLY distilled water to cover separators in battery

cells. DO NOT use tap wa_r.

2. It"bakery TsequTppedwTth yen= caps, make sure =hey

are Jnsr_lledand are tTght.

3. It"necessary, clean battery termTnals.

4. Connec= battery charge cable connec=or plug to panel

recep_cle identified by the words "I2-VO/TS D.C."

S. Connect bat_ry charge cable clamp with red handle

_o the positive (+) battery terminal (Figure 6),

6. Connect battery charge cable clamp with black handle

_o the negative (-) b_ery termTnal (Figure 6).

7. Start engine, let engine run while bz_tery recharges.

8. When battery has charged, shut down engine

NOTE: Use an amomod_ hydrometer _o _st battery s_a_e

of charge and condition. Follow the hydrometer

m_nofaztzrer's instrucUons care4ully.Gener_l_ a b_'_ery is

considered _o be at 100% state of charge when specific gr_Ly

of_ fluid (_ measured by hydrometer) is 1_260or higher.

COLD WEATH ER

OPERATION

Under cer!_inweather conditions(t_mperatures below

40OF[4=C] and a high dew point),your generatormay

experienceicing of the c_rburetor and/or the crankcase

breather system.

Build astructure that will enclose three sidesand the top

of the genera_0r.

I. Make sure entire muffler-side of generator is exposed.

Note that your generator may appear different from

that shown fn Figure 7.

2. Ensure a minimum of _wo feet clearance between open

side of box and nearest obiec=

3. Face exposed end away from wind and elements.

4. Enclosure should hold enough heat created by

generator to prevent problems.

DANGER

.Keep at:!eas t 2 "_ec_of clearance on al!sides Ofg_n_rator for

_d_qUateventilati0n.

, DO NOT Oper_egen_r_or insidoaw buildingOrendc_i

!ncluding_ gene_r comparm_ c_z_rr._or_J v_icl_ _RV).

, P,_m0vegener_t0r_romShelterwhen _emperatureiSabove

_0 [ c] ..................................................................

Inhaltsverzeichnis

Andere Generac Power Systems Tragbarer Generator Handbücher

Generac Power Systems

Generac Power Systems GP Series Bedienungsanleitung

Generac Power Systems

Generac Power Systems NP Series Bedienungsanleitung

Generac Power Systems

Generac Power Systems GP Series Bedienungsanleitung

Generac Power Systems

Generac Power Systems 005982-0 Bedienungsanleitung

Generac Power Systems

Generac Power Systems GP Series Bedienungsanleitung

Generac Power Systems

Generac Power Systems iQ3500 Bedienungsanleitung

Generac Power Systems

Generac Power Systems GP3500iO Bedienungsanleitung

Generac Power Systems

Generac Power Systems 005796-0 (XG6500) Bedienungsanleitung

Generac Power Systems

Generac Power Systems SD050 Bedienungsanleitung

Generac Power Systems

Generac Power Systems ecoGen G0061030 Bedienungsanleitung

Generac Power Systems

Generac Power Systems GP Series Bedienungsanleitung

Generac Power Systems

Generac Power Systems GP Series Bedienungsanleitung

Generac Power Systems

Generac Power Systems QS-4.0G Bedienungsanleitung

Generac Power Systems

Generac Power Systems GP Series Bedienungsanleitung

Generac Power Systems

Generac Power Systems 22 kW Bedienungsanleitung

Generac Power Systems

Generac Power Systems Air-cooled Industrial Mobile Generator... Bedienungsanleitung

Generac Power Systems

Generac Power Systems 006001-0 Bedienungsanleitung

Generac Power Systems

Generac Power Systems SG400 Bedienungsanleitung

Generac Power Systems

Generac Power Systems GP2200i Bedienungsanleitung

Generac Power Systems

Generac Power Systems PowerPact G0065201 Merkblatt

Generac Power Systems

Generac Power Systems 005975-0 Bedienungsanleitung

Generac Power Systems

Generac Power Systems 005467-1 Bedienungsanleitung

Generac Power Systems

Generac Power Systems 04389-0 Montageanleitung

Generac Power Systems

Generac Power Systems XP4000 Professional Bedienungsanleitung

Beliebte Tragbarer Generator Handbücher anderer Marken

Kohler

Kohler 20EORZ Bedienungsanleitung

Powerhorse

Powerhorse 83171 Bedienungsanleitung

HURST

HURST ML-630-SI Bedienungsanleitung

ETQ

ETQ TG4000 Bedienungsanleitung

Briggs & Stratton

Briggs & Stratton 40265 Einrichtungshandbuch

ConMed

ConMed 7550 Bedienungsanleitung

Owon

Owon Waveform Generator Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

Power Stroke

Power Stroke PS906025 Bedienungsanleitung

Firefly

Firefly Cygnus CYG2400/460/24 Bedienungsanleitung

Draper

Draper PG950S Firmware-Update

PowerBoss

PowerBoss PowerBoss Bedienungsanleitung

SDMO

SDMO SH 4000 Bedienungsanleitung

EINHELL

EINHELL STE 5500 Bedienungsanleitung

Wanco

Wanco WI3000P Bedienungsanleitung

Full Boar

Full Boar FBT-3300 Bedienungsanleitung

Dwyer Instruments

Dwyer Instruments ASG Bedienungsanleitung

Westinghouse

Westinghouse WH1000i Series Bedienungsanleitung