Generac Power Systems CENTURION SERIES Bedienungsanleitung
1 of 5
Standby Power Rating
Model 005888-0 (Composite Polymer - Bisque) - 7 kW 60Hz
¡INNOVATIVE DESIGN & PROTOTYPE TESTING are key components of
GENERAC’S success in “IMPROVING POWER BY DESIGN.” But it
doesn’t stop there. Total commitment to component testing, reliability
testing, environmental testing, destruction and life testing, plus testing
to applicable CSA, NEMA, EGSA, and other standards, allows you to
choose GENERAC POWER SYSTEMS with the confidence that these
systems will provide superior performance.
¡
ES
:Offers an extreme value for those who desire automatic backup power at
the most affordable price.
¡TEST CRITERIA:
PROTOTYPE TESTED NEMA MG1-22 EVALUATION
SYSTEM TORSIONAL TESTED MOTOR STARTING ABILITY
¡SOLID-STATE, FREQUENCY COMPENSATED VOLTAGE REGULATION.
This state-of-the-art power maximizing regulation system is standard on
all Generac models. It provides optimized FAST RESPONSE to changing
load conditions and MAXIMUM MOTOR STARTING CAPABILITY by
electronically torque-matching the surge loads to the engine.
¡SINGLE SOURCE SERVICE RESPONSE from Generac’s dealer network
provides parts and service know-how for the entire unit, from the engine
to the smallest electronic component.
¡GENERAC TRANSFER SWITCHES. Long life and reliability are
synonymous with GENERAC POWER SYSTEMS. One reason for this
confidence is that the GENERAC product line includes its own transfer
systems and controls for total system compatibility.
FEATURES
CENTURION®SERIES
ES Standby Generator System
Air-Cooled Gas Engine
7kW
®
7kW
INCLUDES:
• Digital LED Controller
• Automatic Transfer Switch
with Built-In Priority Load Center
• Composite All Weather Enclosure
• Sound Attenuated Enclosure
• External Main Circuit Breaker
• Flexible Fuel Line Connector
• Composite Mounting Pad
• Natural Gas or LP Gas Operation
• 2 Year Limited Warranty
• UL 2200 Listed
2 of 5
ES Standby Generator System - 7 kW features and benefits
Engine
•Generac OHV engine A durable, reliable powertrain for maximum power output.
•Cast iron cylinder walls Rigid construction and added durability provide long engine life.
•Electronic ignition/spark advance These features combine to assure smooth, quick starting every time.
•Pressurized filtration system Better performance, less maintenance and significantly longer engine life.
•Low oil pressure shutdown system Shutdown protection prevents catastrophic engine damage due to low oil.
•High temperature shutdown Prevents damage due to overheating.
•Spin-on automotive type oil filter Captures and collects harmful impurities with easy serviceability.
Generator
•Revolving field
Allows for a smaller, light weight unit that operates 25% more efficiently than a revolving armature generator.
•Displaced phase excitation
Maximizes motor starting capability.
•Automatic voltage regulation Regulates the output voltage to ±5% prevents damaging voltage spikes.
•UL 2200 listed For your safety.
Transfer Switch
•Fully automatic Transfers your vital electrical loads to the energized source of power.
•Remote mounting Mounts near your existing distribution panel for simple, low cost installation.
•Flush mountable Can be installed between studs like a standard electrical panel.
•UL listed For your safety.
Controls
•Auto/Off/Manual switch Selects the operating mode.
•Utility voltage sensing Constantly monitors utility voltage, setpoints 60% dropout, 80% pick-up, of standard voltage.
•Utility interrupt delay Prevents nuisance start-ups of the engine, adjustable 10-30 seconds.
•Engine warm-up Ensures engine is ready to assume the load, setpoint approximately 5 seconds.
•Engine cool-down Allows engine to cool prior to shutdown, setpoint approximately 1 minute.
•Seven day exerciser Operates engine to prevent oil seal drying and damage between power outages.
•Timed Trickle Battery charger Maintains battery charge level to ensure starting.
•Main line circuit breaker Protects generator from overload.
Unit
•Weather protective enclosure Ensures protection against mother nature. Tool-less removal of roof and sides. Three lift-out panels for easy access
to all routine maintenance items. Composite polymer enclosure will not rust and is ideal for harsh and coastal
installations.
•Enclosed critical grade muffler Quiet, critical grade muffler is mounted inside the unit to prevent injuries.
•Small, compact, attractive Makes for an easy, eye appealing installation.
•SAE Sound attenuated enclosure ensures quiet operation.
Installation System
•1ft. (305mm) flexible fuel line connector Easy installation.
7kW
3 of 5
**Sound levels are taken from the front of the generator. Sound levels taken from other sides of the generator may be higher depending on installation parameters. Rating definitions - Standby: Applicable
for supplying emergency power for the duration of the utility power outage. No overload capability is available for this rating. (All ratings in accordance with BS5514, ISO3046 and DIN6271). * Maximum
wattage and current are subject to and limited by such factors as fuel Btu/megajoule content, ambient temperature, altitude, engine power and condition, etc. Maximum power decreases about 3.5 percent for
each 1,000 feet (304.8 meters) above sea level; and also will decrease about 1 percent for each 6° C (10° F) above 16° C (60°F).
Generator
Model 005888-0
Rated Maximum Continuous Power Capacity (LP) 7,000 Watts*
Rated Maximum Continuous Power Capacity (NG) 6,000 Watts*
Rated Voltage 240
Rated Maximum Continuous Load Current – 240 Volts 29.2 / 25
Main Line Circuit Breaker 30 Amp
Phase 1
Number of Rotor Poles 2
Rated AC Frequency 60Hz
Power Factor 1.0
Battery Requirement (not included) Group 26R, 12 Volts and 525 CCA Minimum
Unit Weight (Pounds/Kilos) 250/113.4
Dimensions (L x W x H) in./mm 24.4 x 30.2 x 33/618.5 x 767.5 x 837
Sound output in dB(A) at 23 ft. (7m) with generator operating at normal load** 67
Engine
Type of Engine GENERAC OHV
Number of Cylinders 1
Displacement 432cc
Cylinder Block Aluminum w/Cast Iron Sleeve
Valve Arrangement Overhead Valve
Ignition System Solid-state w/Magneto
Governor System Mechanical
Starter 12 VDC
Oil Capacity Including Filter Approx. 1.1 Qts./1.0L
Operating RPM 3,600
Fuel Consumption
Natural Gas ft³/hr (m³/hr)
1/2 Load
Full Load
Liquid Propane ft3/hr (gal/hr) [Liters/hr]
1/2 Load
Full Load
85 (2.41)
148 (4.19)
36 (0.99) [3.75]
46 (1.26) [4.79]
Note: Fuel pipe must be sized for full load. Required fuel pressure to generator fuel inlet at all load ranges - 5-7" water column (9-13mm mercury) for natural gas, 10-12" water column (19-22mm
mercury) for LP gas.
For Btu content, multiply ft3/hr x 2500 (LP) or ft3/hr x 1000 (NG)
For Megajoule content, multiply m³/hr x 93.15 (LP) or m³/hr x 37.26 (NG)
Controls
Digital LED Indicators Simple user interface for ease of operation.
Mode Switch: Auto Automatic Start on Utility failure. 7 day exerciser.
Off Stops unit. Power is removed. Control and charger still operate.
Manual/Test (start) Start with starter control, unit stays on. If utility fails, transfer to load takes place.
Engine Start Sequence Cyclic cranking: 16 sec. on, 7 rest (90 sec. maximum duration)
Engine Warm-up 5 sec.
Engine Cool-Down 1 min.
Starter Lock-out Starter cannot re-engage until 5 sec. after engine has stopped.
2.5 Amp Timed Trickle Battery Charger Standard
Automatic Voltage Regulator w/Overvoltage Protection Standard
Automatic Low Oil Pressure Shutdown Standard
Overspeed Shutdown Standard, 72Hz
High Temperature Shutdown Standard
Overcrank Protection Standard
Safety Fused Standard
ES Standby Generator System - 7 kW specifications
7kW
4 of 5
7kW
ES Standby Generator System - 7 kW features and benefits
Model 005888-0
No. of Poles 2
Current Rating (Amps) 50
Voltage 120/240 1Ø
Utility Voltage Monitor (Fixed)*
-Pick-up
-Dropout
80%
60%
Return to Utility* approx. 15 sec.
Exercise weekly for 12 minutes* Standard
UL Listed Standard
Total of Pre-wired Circuits
No. 15A 120V
No. 20A 120V
No. 20A 240V
No. 30A 240V
No. 40A 240V
No. 50A 240V
8
5
1
-
1
-
-
Circuit Breaker Protected
Available RMS Symmetrical
Fault Current @ 250 Volts 10,000
Weight (Pounds/Kilos) 25/11.3
Transfer Switch Features
• Electrically operated, mechanically-held
contacts for fast, positive connections.
• Rated for all classes of load, 100%
equipment rated, both inductive and
resistive.
• 2 pole, 250 VAC contactors.
• 160 millisecond transfer time.
• NEMA 1 (indoor rated) enclosure is standard.
• Flush mountable.
Dimensions Mechanical Dimensions (in inches/mm)
Amps Height Width Depth
H1 H2 W1 W2
50 18.5 in 23 in 10.5 in 15.38 in 3.4 in
470 mm 584 mm 267 mm 391 mm 86 mm
Wire Ranges
Amps Neutral Lug Ground Lug
50 2/0 - #14 2/0 - #14
H1
W1
D
W2
H2
*Function of Controller
5 of 5
Generac Power Systems, Inc. • S45 W29290 HWY. 59, Waukesha, WI 53189 • centuriongenerators.com
©2013 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 0186730SBY-L Printed in U.S.A. 05/30/13
Model # Product Description
005819-0 26R Wet Cell Battery Every standby generator requires a battery to start the system. Generac offers the
recommended 26R wet cell battery for use with all air-cooled standby product.
005865-0 Cold Weather Kit The CorePower cold weather kit is recommended for CorePower units installed in
regions where the temperature regularly falls below 32°F (0°C).
006003-0 Scheduled Maintenance Kit Generac's scheduled maintenance kits provide all the hardware necessary to
perform complete routine maintenance on a Generac automatic standby generator.
ES Standby Generator System - 7 kW available accessories
dimensions
7kW
Design and specifications subject to change without notice. Dimensions shown are approximate. Contact your Generac dealer for certified drawings. DO NOT USE THESE DIMENSIONS FOR INSTALLATION PURPOSES.
RIGHT SIDE VIEW
767.5mm
[30.22 in.]
618.5mm
[24.35 in.]
837mm
[32.95 in.]
FRONT VIEW
76.2mm [3.0 in.]
PEA GRAVEL
MINIMUM
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Generac Power Systems Tragbarer Generator Handbücher
Generac Power Systems
Generac Power Systems 005982-0 Bedienungsanleitung
Generac Power Systems
Generac Power Systems 005714-0 Bedienungsanleitung
Generac Power Systems
Generac Power Systems QT06030GNSN Bedienungsanleitung
Generac Power Systems
Generac Power Systems 0595-0 Bedienungsanleitung
Generac Power Systems
Generac Power Systems 004991-0 Bedienungsanleitung
Generac Power Systems
Generac Power Systems 005789-0 Bedienungsanleitung
Generac Power Systems
Generac Power Systems GP7000E GP SERIES Bedienungsanleitung
Generac Power Systems
Generac Power Systems GP Series Bedienungsanleitung
Generac Power Systems
Generac Power Systems 3190290100 Bedienungsanleitung
Generac Power Systems
Generac Power Systems GP17500E Bedienungsanleitung
Generac Power Systems
Generac Power Systems GP6500E GP SERIES Bedienungsanleitung
Generac Power Systems
Generac Power Systems 006001-0 Bedienungsanleitung
Generac Power Systems
Generac Power Systems 02010-0 PRIMEPACT 50 Betriebsanleitung
Generac Power Systems
Generac Power Systems Automatic Standby Generators Bedienungsanleitung
Generac Power Systems
Generac Power Systems 0065781 Bedienungsanleitung
Generac Power Systems
Generac Power Systems GP Series Bedienungsanleitung
Generac Power Systems
Generac Power Systems GP15000E Bedienungsanleitung
Generac Power Systems
Generac Power Systems GP7500E GP SERIES Bedienungsanleitung
Generac Power Systems
Generac Power Systems EcoGen G0070340 Merkblatt
Generac Power Systems
Generac Power Systems 7117 Bedienungsanleitung
Generac Power Systems
Generac Power Systems 005796-0 (XG6500) Bedienungsanleitung
Generac Power Systems
Generac Power Systems MDG25IF4 Bedienungsanleitung
Generac Power Systems
Generac Power Systems Portable Generator Bedienungsanleitung
Generac Power Systems
Generac Power Systems CorePower/ES Generator Merkblatt
