Genie ZX-135/70 with Jib-Extend Bedienungsanleitung

Operator's Manual

135/70 CE

with Jib-Extend

with

Maintenance

Information

Original Instructions

Third Edition

First Printing

Part No. 1272823GT

Operator's Manual Third Edition • First Printing

ZX-135/70 Part No. 1272823GT

Front Matter

Contents

Introduction ........................................................... 1

Symbol and Hazard Pictorials Definitions............. 4

General Safety ...................................................... 6

Personal Safety..................................................... 9

Work Area Safety................................................ 10

Legend ................................................................ 18

Controls............................................................... 19

Inspections.......................................................... 28

Operating Instructions......................................... 46

Transport and Lifting Instructions ....................... 55

Maintenance ....................................................... 58

Specifications...................................................... 61

Third Edition: First Printing, March 2017

Genie and "ZX" are registered trademarks of

Terex South Dakota, Inc. in the U.S.A. and many

other countries.

Complies with EC Directive 2006/42/EC

See EC Declaration of Conformity

Third Edition • First Printing Operator's Manual

Introduction

Part No. 1272823GT ZX-135/70 1

Introducti on

About this manual

Genie appreciates your choice of our machine for

your application. Our number one priority is user

safety, which is best achieved by our joint efforts.

This book is an operation and daily maintenance

manual for the user or operator of a Genie

machine.

This manual should be considered a permanent

part of your machine and should remain with the

machine at all times. If you have any questions,

contact Genie.

Product Identification

The machine serial number is located on the serial

label.

Intended Use

This machine is intended to be used only to lift

personnel, along with their tools and materials to

an aerial work site.

Bulletin Distribution and

Compliance

Safety of product users is of paramount importance

to Genie. Various bulletins are used by Genie to

communicate important safety and product

information to dealers and machine owners.

The information contained in the bulletins is tied to

specific machines using the machine model and

serial number.

Distribution of bulletins is based on the most

current owner on record along with their associated

dealer, so it is important to register your machine

and keep your contact information up to date.

To ensure safety of personnel and the reliable

continued operation of your machine, be sure to

comply with the action indicated in a respective

bulletin.

Operator's Manual Third Edition • First Printing

Introduction

2 ZX-135/70 Part No. 1272823GT

Contacting the Manufacturer

At times it may be necessary to contact Genie.

When you do, be ready to supply the model

number and serial number of your machine, along

with your name and contact information. At

minimum, Genie should be contacted for:

Accident reporting

Questions regarding product applications and

safety

Standards and regulatory compliance information

Current owner updates, such as changes in

machine ownership or changes in your contact

information. See Transfer of Ownership, below.

Transfer of Machine Ownership

Taking a few minutes to update owner information

will ensure that you receive important safety,

maintenance and operating information that

applies to your machine.

Please register your machine by visiting us on the

web at www.genielift.com or by calling us toll free

at 1-800-536-1800.

Danger

Failure to obey the instructions and

safety rules in this manual will result

in death or serious injury.

Do Not Operate Unless:

You learn and practice the principles of safe

machine operation contained in this operator’s

manual.

1 Avoid hazardous situations.

Know and understand the safety rules

before going on to the next section.

2 Always perform a pre-operation inspection.

3 Always perform function tests prior to use.

4 Inspect the workplace.

5 Only use the machine as it was intended.

You read, understand and obey the

manufacturer’s instructions and safety

rules–safety and operator’s manuals and

machine decals.

You read, understand and obey employer’s

safety rules and worksite regulations.

You read, understand and obey all applicable

governmental regulations.

You are properly trained to safely operate the

machine.

Third Edition • First Printing Operator's Manual

Introduction

Part No. 1272823GT ZX-135/70 3

Safety Sign Maintenance

Replace any missing or damaged safety signs.

Keep operator safety in mind at all times. Use mild

soap and water to clean safety signs. Do not use

solvent-based cleaners because they may damage

the safety sign material.

Hazard Classification

Decals on this machine use symbols, color coding

and signal words to identify the following:

Safety alert symbol–used to alert

you to potential personal injury

hazards. Obey all safety

messages that follow this symbol

to avoid possible injury or death.

Indicates a hazardous situation

which, if not avoided, will result in

death or serious injury.

Indicates a hazardous situation

which, if not avoided, could result

in death or serious injury.

Indicates a hazardous situation

which, if not avoided, could result

in minor or moderate injury.

Indicates a property damage

message.

DANGER

WARNING

CAUTION

NOTICE

Operator's Manual Third Edition • First Printing

Symbol and Hazard Pictorials Definitions

4 ZX-135/70 Part No. 1272823GT

Symbol and Hazard P ictorials Definiti ons

Crush hazard Keep away from

moving parts

Crush hazard Overhead obstruction Collision hazard

Electrocution hazard Maintain required

clearance

Tip-over hazard Tip-over hazard Tip-over hazard

Electrocution hazard Avoid contact Disconnect battery Read the operator’s

manual

Read the service

manual

Explosion hazard No smoking.

No flame.

Stop engine.

Explosion hazard Burn hazard Fire extinguisher

Fire hazard No smoking Explosion hazard No step Lanyard anchorage

points

Third Edition • First Printing Operator's Manual

Symbol and Hazard Pictorials Definitions

Part No. 1272823GT ZX-135/70 5

Platform tie-down

instructions

Lifting & tie down instructions Tie-down point Lifting point

Wind speed Maximum capacity Weight of welder

reduces capacity

Wheel load Tire specifications

Recovery procedure if tilt alarm sounds while

elevated

Platform uphill:

1Lower primary

2Retract/lower

secondary

3Retract primary

Platform downhill:

1Retract primary

2Retract / lower

secondary

3Lower primary

Do not use ether or

other high energy

starting aids on

machines equipped

with glow plugs.

Voltage rating for

power to platform

Pressure rating for

air line to platform

Color Coded

Direction Arrows

Runaway Hazard Access by trained

and authorized

personnel only

Manual force

Operator's Manual Third Edition • First Printing

General Safety

6 ZX-135/70 Part No. 1272823GT

General Safety

114252

114252 A

133067

1263542

82487

82487 B

133205

114249

114249 A

82481 B

82481

114249

1263542

114249

1263542

82481

82487

114252

133205

1263542

114252

133067

1256425

82472

Third Edition • First Printing Operator's Manual

General Safety

Part No. 1272823GT ZX-135/70 7

Operator's Manual Third Edition • First Printing

General Safety

8 ZX-135/70 Part No. 1272823GT

Andere Handbücher für ZX-135/70 with Jib-Extend

Inhaltsverzeichnis

Andere Genie Hebesystem Handbücher

Genie

Genie Z-45/25 Bedienungsanleitung

Genie

Genie Z-30/20N Bedienungsanleitung

Genie

Genie Z-45J Bedienungsanleitung

Genie

Genie GS-2668 RT Bedienungsanleitung

Genie

Genie TZ-50 Bedienungsanleitung

Genie

Genie Z-25/8 Bedienungsanleitung

Genie

Genie DPL Super Series Bedienungsanleitung

Genie

Genie GS-1530 Bedienungsanleitung

Genie

Genie CE Series Bedienungsanleitung

Genie

Genie GTH-2506 AU.3 Bedienungsanleitung

Genie

Genie GTH-4013 SX Bedienungsanleitung

Genie

Genie GS-2632 Einrichtungshandbuch

Genie

Genie GR-20J Bedienungsanleitung

Genie

Genie GTH-2506 Stage A Bedienungsanleitung

Genie

Genie 33547 Operators Bedienungsanleitung

Genie

Genie Z-45/25 Bedienungsanleitung

Genie

Genie GC-1530 Bedienungsanleitung

Genie

Genie Z-30/20N Bedienungsanleitung

Genie

Genie Z-45/22 Bedienungsanleitung

Genie

Genie Z-30/20N Installations- und Betriebsanleitung

Genie

Genie Z-60/34 Bedienungsanleitung

Genie

Genie Load Lifter 5.5 Bedienungsanleitung

Genie

Genie S-65 Bedienungsanleitung

Genie

Genie Z-45/25 Installations- und Betriebsanleitung

Beliebte Hebesystem Handbücher anderer Marken

morse

morse 82H-124 Bedienungsanleitung

Braun

Braun NL955 Series Bedienungsanleitung

haacon

haacon 1889.10 Bedienungsanleitung

Protekt

Protekt AT 252 Bedienungsanleitung

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Bedienungsanleitung

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Bedienungsanleitung

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Bedienungsanleitung

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Bedienungsanleitung

Custom Equipment

Custom Equipment Hy-Brid 3 Series Programmierhandbuch

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Programmierhandbuch

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Programmierhandbuch

BERG

BERG BeNomic EasyLeaf Bedienungsanleitung

Powermate

Powermate LiftGate LG-3 Bedienungsanleitung

Snorkel

Snorkel TM12 Series Bedienungsanleitung

Terberg

Terberg OMNIDEKA Bedienungsanleitung

Harmar Mobility

Harmar Mobility AL625 Betriebsanleitung

Rotary

Rotary SPO16 Bedienungsanleitung

Ricon

Ricon Mirage F9T Bedienungsanleitung