Genius Hub kit Bedienungsanleitung

Installation Guide

The Genius Hub

R2.9

The Genius Hub kit

Genius Hub

(supplied)

Broadband

Internet Router

(not supplied)

Power Plug

(supplied)

Genius Hub

Room Stat

(supplied)

Radiator Valve

(optional)

Room Sensor

(optional)

Genius Hub

Boiler Controller

(supplied)

Smart

Plug

(optional)

The order of events

1.!The Genius Hub install................................................................... 4!

2.!Installing the thermostat ................................................................ 5!

3.!Installing the boiler controller......................................................... 6!

4.!Setting up the smart plug(s) around the house ........................... 15!

5.!Setting up the app ....................................................................... 16!

6.!Adding new zones to the house (on the app) .............................. 18!

7.!Adding the devices to the individual zones ................................. 19!

8.!Adding the valves and room sensors to the house ..................... 20!

9.!Setting up a house with no radiator valves or room sensors ...... 22!

10.!Testing the system..................................................................... 23!

11.!Registering the Genius Hub....................................................... 25!

12.!Troubleshooting......................................................................... 26!

13.!Specifications ............................................................................ 28!

14.!European Compliance Statement.............................................. 31!

15.!An Important Note ..................................................................... 32!

Note: Once set up; Use the User Guide for next steps on how to

program your heating system.

1. The Genius Hub install

Set up the Genius Hub next to the broadband internet router. Locate

one of the free ‘Ethernet’ jacks on the back of the router. The short

internet cable (provided) should link the Genius Hub to the broadband

router.

Plug the USB power cable into the power supply included with the

Genius Hub and plug the power supply into a wall socket (not an

extension lead).

Try and ensure that the Genius Hub is in an open space and not

hidden away behind many heavy objects.

The low power wireless communication to the other devices is easily

stopped by thick walls, large metal objects, and water.

Connect Genius

Hub to

Broadband

Internet router

with the internet

cable supplied

Power Plug

USB cable

Red/Orange LED.

Red when you

first plug it in

turning to orange

after about 5

seconds

2. Installing the thermostat

The thermostat is the master controller for all of the rooms in the

house. The temperature it measurers is used to determine whether or

not to turn on the rooms which do not have room sensors.

It is important to site it in a cool (ideally north facing room) so that it

will always allow rooms to come on when they are set to, on the app.

The thermostat needs to be placed on a wall and be in radio range

with the Genius Hub.

First take the thermostat to the position in the house where it is likely

to be located

. Next insert the batteries into the back of the

thermostat. Leave it in the position where it will be fixed to the wall.

Within 20 minutes the thermostat will report a temperature back to the

app. If it does not it will need to be moved closer to the Genius Hub.

minutes the thermostat will repor

t a temperature back to the

f it does not it will need to be moved closer to the Genius Hub.

Insert the

batteries into

the back of the

thermostat

Leave the

thermostat in

where it is

going to be

installed

3. Installing the boiler controller

Types of boiler

The Genius Hub has been tested with most makes of combination

boiler (properties with no hot water tank) and system boiler

(properties with a hot water tank).

For combination boilers. In many cases you can swap the boiler

programmer with the Genius Hub Boiler Controller (Single). You need

to ensure that terminals L, N, 2 & 4 on the Genius Hub boiler controller

are wired correctly.

Boiler programmers often use a standard back-plate. In this case you

can remove the screws from the underside of the existing programmer

and swap the existing programmer for the Heat Genius Boiler

Controller (Single), without needing to do any re-wiring. If there is no

boiler programmer the Genius Hub Boiler Controller (Single) must be

wired into the boiler as if it were an external programmer or

thermostat. See wiring diagrams provided by boiler manufacturer

to confirm the wiring guide in this installation manual.

For system boilers. The existing programmer must be exchanged

with the Heat Genius Boiler Controller (Dual) to control the heating and

the hot water. In many cases where there is an existing room

thermostat, the Heat Genius Thermostat can replace where the old

house thermostat used to be located. Note that the wiring for the old

thermostat is no longer required, it can be removed of linked through.

If there is no existing programmer then the Genius Hub Boiler

Controller (dual) should be wired directly into the wiring centre. See

wiring diagrams provided by boiler manufacturer to confirm the

wiring guide in this installation manual.

DO NOT ATTEMPT TO WIRE IN YOUR BOILER CONTROLLER IF

YOU ARE NOT 100% SURE THAT YOU KNOW WHAT YOU ARE

DOING. DANGER OF ELECTRIC SHOCK! ALL WIRING SHOULD

CONFORM TO IEE REGULATIONS. THE BOI

LER MUST BE

ELECTRICALLY ISOLATED BEFORE YOU COMMENCE WORK ON

WIRING IN THE BOILER CONTROLLER!

Switch off the power

Switch off power to your boiler at your

home’s breaker box.

Note: Switching off power protects

both you and your equipment.

Central

Heating

Isolated

Warning: Failure to follow these safety instructions result in fire,

electric shock or damage to the Genius Hub or other property.

Read all safety information and

operating instructions below before

using the Genius Hub to avoid injury.

Heat Genius Systems with Boiler Controller (Single)

(One-Channel Receiver Unit)

Combination Boiler

Typical combi boiler connection – consult the boiler manufacturers

installation manual before commencing any installation work.

230V/50H

Boiler

controller

internal

wiring

External

programmer

connections

in boiler

NSupply

LReturn

BOILER

Remove link

LSupply

Live supply from boiler to boiler controller

Neutral supply from boiler to boiler controller

Earth connection

Switched live return to boiler

To Genius

Hub boiler

controller

GENIUS HUB BOILER

CONTROLLER (SINGLE)

NOTE: The boiler controller is mains powered

and requires either a separate 3A fused spur

or connection directly into the boiler if the

boiler is powered from a 3A fused spur.

TIP. Take a photo of the existing wiring

before you start to help you remember.

Above is the standard

back-plate. This is the

typical wiring for a

high voltage (230V)

boiler connection.

(One-Channel Receiver Unit)

System Boiler (‘Y’ & ‘S’ Plan)

Typical system boiler connection – consult the boiler manufacturers

installation manual before commencing any installation work.

WIRING CENTRE

Link

and

to stop old

programmer from controlling

central heating

Live supply from wiring centre to boiler controller

Neutral supply from wiring centre to boiler controller

Earth connection

Switched live return to wiring centre

Control to 3-way

mid position or 2-

way valve

To Genius

Hub Boiler

Controller

GENIUS

HUB

BOILER

CONTROLLER

NOTE: The boiler controller is

mains powered and requires a

3A fused spur.

230V/50H

Boiler

controller

internal

wiring

Heat Genius Systems with Boiler Controller (Dual)

(Two-Channel Receiver Unit)

System Boiler (‘Y’ Plan)

Page 3/3

Heat Genius

Terminal

Wiring Centre

Terminal

N 2

L 1

1 7

2 Not connected

3 Cylinder Stat Common

4 5

PUMP

CYLINDER

STAT

Satisfied

COM

Call for heat

3 PORT MID

POSITION

VALVE

White

Grey

Orange

HEAT GEINIUS

BOILER

CONTROLLER

BOILER

HOT

WATER

HEATING

NOTE:

For safety, it is recommended

that the original tank/cylinder thermostat

remains in the circuit, left to maximum

hot water temperature (65°C).

WIRING CENTRE

BOILER

1: Hot Water OFF

3: Hot Water ON

4: Heating ON

Remove link

Supply

Return

‘Y’ PLAN

MAINS SUPPLY

230V 50Hz

Inhaltsverzeichnis

Andere Genius Controller Handbücher

Genius

Genius Brain 17 Bedienungsanleitung

Genius

Genius BRAIN 06 24V Bedienungsanleitung

Genius

Genius BRAIN 15 Bedienungsanleitung

Genius

Genius A453 Technisches Handbuch

Genius

Genius JA277K Bedienungsanleitung

Genius

Genius JA510C Bedienungsanleitung

Genius

Genius GE-R4 Bedienungsanleitung

Genius

Genius JA383 Technisches Handbuch

Genius

Genius GSM MOBILE STARTER Bedienungsanleitung

Genius

Genius SPRINT 382 Bedienungsanleitung

Genius

Genius JA382 Technisches Handbuch

Genius

Genius JA487C Technisches Handbuch

Genius

Genius BRAIN 04 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch