Genius E5000 Handbuch

Hardware Installation

1. You can connect the receiver to a USB port of a PC

2. Install two AA batteries in the mouse.

3. Turn on your computer.

4. After you open Windows, please press

the button on the receiver first and

then press the button under the mouse

for channel setting.

Important: You can use the battery charger

receiver to recharge two AA each time

when you use the PC. Plug the battery

charger receiver USB connector into the

PC directly and remember do not put the batteries in the wrong direction, use the

same types of batteries, and do not recharge via the USB hub, that will make your

receiver, main-board and hub burn or become non-usable easily. Also, keep all

drinks away! If any spill occurs on the receiver, unplug the USB connector first and

clean the receiver immediately. Please remove the batteries if you do not use this de-

vice for at least two weeks.

Warning: (Troubleshooting)

1. Please do not use Wireless optical mouse on a desk which is made of glass, mir-

ror, iron, or black velvet. Also, a flat surface is necessary or the Optical Sensor

will error easily. When you use Wireless optical mouse on a desk that is made of

metal, try using a pad and reduce the receiving distance.

2. Before the first installation is completed (channel setting ready), the mouse will

not work.

3. The Wireless optical mouse channel provides 256 ID-codes, and it automatically

selects the ID # for your mouse. You can only set up one Wireless optical mouse

at a time. But if you have additional Wireless optical mouse sets in an area of 10

square meters, more interference will occur between the receiver and your

mouse.

ENGLISH

4. If you feel the mouse does not move smooth as usual, then the batteries have lost

their charge, so please replace them. Also, the wireless icon will be blinking

“red” when there is a battery-low situation. The LED on the receiver shows the

battery-recharging status (from shining to LED completely “on” for battery full).

You should set up the channel every time you replace the batteries.

5. If you need to buy new batteries, please choose Ni-MH (Nickel-Metal-Hydride)

AA batteries, 1.2V, 1300 to 1600 mAH. Please do not mix or use other types

of batteries (Li-ion, Ni-Cd, Alkaline, etc.)

6. The Wireless optical mouse with radio frequency gives you free movement and

an enjoyable experience. For optimal performance, place the receiver at least 8

inches (about 20 cm) away from the mouse and other electrical devices, such as

the computer, monitor, and etc.

Software Installation

1. Make sure the mouse is connected to the computer.

2. Put the Setup disk (or CD) into the disk drive.

3. Follow the instructions on the screen to finish the software installation.

Factory Setting

10 “One Touch” keys for fast access to multimedia, the Internet, and the application

switch.

Button Assignments

The Button Assignment feature lets you work in a more

efficient way because you can assign the most frequently

used commands in Windows to the mouse buttons.

1. Left Button: Provides traditional mouse functions

like click, double click and drag.

2. Right Button: You can assign this button to fre-

quently used keyboard and mouse functions in addi-

tion to features like Easy Jump, Auto-Panning,

Zoom, etc.

3. Magic-Roller: Press the “Magic-Roller” to surf the

Internet and Windows documents

4. Back: See previous page when viewing the Internet

5. Forward: Go to next page when viewing the Internet

6. WWW: Open browser (Netscape or IE)

7. Play & Pause: Play and pause of audio or video CD’s

8. Vol. +: Increase volume

9. Vol. -: Decrease volume

10. Application Switch: You can switch between active programs and documents

Inhaltsverzeichnis

Andere Genius Maus Handbücher

Genius

Genius NETSCROLL 310 Bedienungsanleitung

Genius

Genius NETSCROLL 110X Bedienungsanleitung

Genius

Genius TRAVELER 220 LASER Bedienungsanleitung

Genius

Genius NETSCROLL 220 LASER Bedienungsanleitung

Genius

Genius TRAVELER 915BT LASER - Bedienungsanleitung

Genius

Genius TRAVELER 915BT LASER - Bedienungsanleitung

Genius

Genius ERGO T555 LASER Bedienungsanleitung

Genius

Genius WIRELESS MINI NAVIGATOR Bedienungsanleitung

Genius

Genius NETSCROLL 310X Bedienungsanleitung

Genius

Genius WIRELESS TRAVELER SE2 - Bedienungsanleitung

Genius

Genius ERGO 520 Bedienungsanleitung

Genius

Genius TRAVELER 330 Bedienungsanleitung

Genius

Genius ERGO 720 LASER Bedienungsanleitung

Genius

Genius Micro Traveler 900BT Bedienungsanleitung

Genius

Genius TRAVELER T925 LASER Bedienungsanleitung

Genius

Genius WIRELESS MINI NAVIGATOR Bedienungsanleitung

Genius

Genius TRAVELER 355 LASER Bedienungsanleitung

Genius

Genius ERGO 3000 - Bedienungsanleitung

Genius

Genius NAVIGATOR 905BT Bedienungsanleitung

Genius

Genius ERGO 325 LASER Bedienungsanleitung

Genius

Genius TRAVELER 900 Bedienungsanleitung

Genius

Genius NAVIGATOR 900G LASER Bedienungsanleitung

Genius

Genius M8-610 Handbuch

Genius

Genius NETSCROLL 321B Bedienungsanleitung

Beliebte Maus Handbücher anderer Marken

Sven

Sven RX-G720 Bedienungsanleitung

3DConnexion

3DConnexion CadMouse Pro Bedienungsanleitung

Canyon

Canyon Puncher GM-20 Bedienungsanleitung

Sharkoon

Sharkoon Light2 180 Bedienungsanleitung

Cherry

Cherry MW 8C ERGO Bedienungsanleitung

NGS

NGS HIT RB Bedienungsanleitung

Sharkoon

Sharkoon FireGlider Bedienungsanleitung

Lenovo

Lenovo Wireless Mouse N3902 Bedienungsanleitung

BASETech

BASETech BN-S11 Bedienungsanleitung

Dell

Dell WM326 Bedienungsanleitung

Areson

Areson B213 Bedienungsanleitung

HP M17587-371 Bedienungsanleitung

Chatpen

Chatpen CHA-30 Bedienungsanleitung

GAMDIAS

GAMDIAS DEMETER GMS5000 Bedienungsanleitung

HP KJ453AA - Wireless Laser Mouse Bedienungsanleitung

Trust

Trust GRAPHIN GXT 960 Bedienungsanleitung

Lenovo

Lenovo SD-9082 Bedienungsanleitung

Alienware

Alienware AW320M Bedienungsanleitung