Genius N5000 Montageanleitung

Hardware Installation

1. You can connect the receiver to a USB port of a PC

2. Install two AA batteries in the mouse.

3. Turn on your computer.

4. After you open Windows, please press the button on the receiver first and then

press the button under the mouse for channel setting.

Important: Remember do not put the batteries in the wrong direction, use the same

types of batteries. Also, keep all drinks away! If any spill occurs on the receiver,

unplug the USB connector first and clean the receiver immediately. Please switch the

button to "off" under the mouse once you don't use it for a long time, and remove the

batteries if you do not use this device for at least two weeks.

Warning: (Troubleshooting)

1. Please do not use wireless optical mouse on a desk which is made of glass, mir-

ror, iron, or black velvet. Also, a flat surface is necessary or the optical sensor

will error easily. When you use wireless optical mouse on a desk that is made of

metal, try using a pad and reduce the receiving distance.

2. Before the first installation is completed (channel setting ready), the mouse will

not work in DOS.

3. The wireless optical mouse channel provides 256 ID-codes, and it automatically

selects the ID # for your mouse. You can only set up one wireless optical mouse

at a time. But if you have additional wireless optical mouse sets in an area of 10

square meters, more interference will occur between the receiver and your

mouse.

4. If you feel the mouse does not move smooth as usual, then the batteries have lost

their charge, so please replace them.

5. The wireless optical mouse with radio frequency gives you free movement and

an enjoyable experience. For optimal performance, place the receiver at least 8

inches (about 20 cm) away from the mouse and other electrical devices, such as

the computer, monitor, and etc.

1

ENGLISH

Software Installation

1. Make sure the mouse is connected to the computer.

2. Put the Setup disk (or CD) into the disk drive.

3. Follow the instructions on the screen to finish the software installation.

Factory Setting

Changing the Faceplate

Push the button underneath

the mouse towards the front,

and the faceplate will pop off

Button Assignments

1. Left Button: Provides traditional mouse functions

like click, double click and drag.

2. Right Button: You can assign this button to fre-

quently used keyboard and mouse functions in ad-

dition to features like Easy Jump, Auto-Panning,

Zoom, etc.

3. Magic-Roller: Press the “Magic-Roller” to surf

the Internet and Windows documents.

4. Back: See previous page when viewing the Inter-

net.

5. Forward: Go to next page when viewing the

Internet.

6. Application Switch: You can switch between ac-

tive programs and documents.

Button Assignments

2

Inhaltsverzeichnis

Andere Genius Maus Handbücher

Genius

Genius TRAVELER 900 Bedienungsanleitung

Genius

Genius DX-ECO Bedienungsanleitung

Genius

Genius WIRELESS MINI NAVIGATOR Bedienungsanleitung

Genius

Genius NAVIGATOR 535 Bedienungsanleitung

Genius

Genius X-G300 Bedienungsanleitung

Genius

Genius GM-130024/T Handbuch

Genius

Genius NAVIGATOR 905BT Bedienungsanleitung

Genius

Genius M8-610 Handbuch

Genius

Genius MT900BT Handbuch

Genius

Genius NAVIGATOR 365 LASER Bedienungsanleitung

Genius

Genius Traveler 9005BT Bedienungsanleitung

Genius

Genius TRAVELER P330 Bedienungsanleitung

Genius

Genius TRAVELER 220 LASER Bedienungsanleitung

Genius

Genius NAVIGATOR 905BT Bedienungsanleitung

Genius

Genius NETSCROLL 100 Bedienungsanleitung

Genius

Genius NS-6005 Bedienungsanleitung

Genius

Genius TRAVELER 915BT LASER - Bedienungsanleitung

Genius

Genius WIRELESS TRAVELER SE2 - Bedienungsanleitung

Genius

Genius NAVIGATOR 5000 Bedienungsanleitung

Genius

Genius NetScroII Optical Bedienungsanleitung

Genius

Genius Ergo 8200S Bedienungsanleitung

Genius

Genius NETSCROLL 100X Bedienungsanleitung

Genius

Genius NAVIGATOR 805 Bedienungsanleitung

Genius

Genius NAVIGATOR 900 Bedienungsanleitung

Beliebte Maus Handbücher anderer Marken

Sven

Sven RX-G720 Bedienungsanleitung

3DConnexion

3DConnexion CadMouse Pro Bedienungsanleitung

Canyon

Canyon Puncher GM-20 Bedienungsanleitung

Sharkoon

Sharkoon Light2 180 Bedienungsanleitung

Cherry

Cherry MW 8C ERGO Bedienungsanleitung

NGS

NGS HIT RB Bedienungsanleitung

Sharkoon

Sharkoon FireGlider Bedienungsanleitung

Lenovo

Lenovo Wireless Mouse N3902 Bedienungsanleitung

BASETech

BASETech BN-S11 Bedienungsanleitung

Dell

Dell WM326 Bedienungsanleitung

Areson

Areson B213 Bedienungsanleitung

HP

HP M17587-371 Bedienungsanleitung

Chatpen

Chatpen CHA-30 Bedienungsanleitung

GAMDIAS

GAMDIAS DEMETER GMS5000 Bedienungsanleitung

HP

HP KJ453AA - Wireless Laser Mouse Bedienungsanleitung

Trust

Trust GRAPHIN GXT 960 Bedienungsanleitung

Lenovo

Lenovo SD-9082 Bedienungsanleitung

Alienware

Alienware AW320M Bedienungsanleitung