GeoVision GV-FR Bedienungsanleitung

GV-FR Panel

Quick Start Guide

FRPANELV10-QG-A

Thank you for purchasing GV-FR Panel. This guide is designed to assist the new user in getting immediate

results from the panel. For advanced information on how to use GV-FR Panel, please refer to GV-FR Panel

User’s Manual.

Under the copyright laws, this manual may not be copied, inwhole or inpart,

without the written consent of GeoVision.

Every effort has been made to ensure that the information in this manual is

accurate. GeoVision, Inc. makes no expressed or implied warranty of any kind

and assumes no responsibility for errors or omissions. No liability is assumed

for incidental or consequential damages arising from the use of the information

or products contained herein. Features and specifications are subject to

change without notice.

GeoVision, Inc.

9F, No. 246, Sec. 1, Neihu Rd.,

Neihu District, Taipei, Taiwan

Tel: +886-2-8797-8377

Fax: +886-2-8797-8335

http://www.geovision.com.tw

Trademarks used inthis manual: GeoVision, the GeoVision logo and GV

series products are trademarks of GeoVision, Inc. Windows is a

registered trademark of Microsoft Corporation.

January 2021

Contents

Recognition and Authentication Considerations................................2

1. Introduction ....................................................................................3

1.1 Packing List...............................................................................3

1.2 Overview...................................................................................4

2. Installation ......................................................................................6

2.1 Connecting GV-FR Panel..........................................................6

2.2 Installation.................................................................................7

3. Accessing GV-FR Panel .................................................................9

3.1 Looking Up the IPAddress......................................................10

4. Advanced Settings .......................................................................12

4.1 Upgrading System Firmware...................................................12

4.2 Restoring to Factory Default....................................................13

Recognition and Authentication Considerations

Face Recognition Distance:

•GV-FR Panel delivers optimal face recognition results when the faces of the

targets are within 1 meter (3 ft) of the GV-FR Panel.

Lighting Conditions:

•GV-FR Panel is designed for indoor use only. Avoid exposing it to direct sunlight as

it may affect its face recognition performance.

Face Recognition Limitations:

•GV-FR Panel may not be able to recognize faces wearing any type of masks or

sunglasses.

Detection Area of Cards, Tags / Fobs, QR Codes:

•When swiping cards, place them closely against the touch screen for optimal

detection effect.

•When swiping tags / fobs, place them closely against the text “NFC”on the touch

screen for optimal detection effect.

•When scanning QR codes, keep a distance of 10-15 cm (4-6 in) from the reader

for effective scanning.

Detection Area for Card

Place tags / fobs closely against the text “NFC”

QR code reader

1. Introduction

Welcome to the GV-FR Panel Quick Start Guide. In the following sections, you will learn the

basic installations and configurations of GV-FR Panel. For details, see the GV-FR Panel

User’s Manual.

1.1Packing List

•GV-FR Panel

•Wall Mount Bracket kit

•Wiegand cable

•USB Host PH2.0-4P cable

•RJ-45 cable

•USB OTG PH2.0-4P cable

•Power cable

1.2Overview

810

No.

Name

Function

LED Light

•White LED: Turns on LED lighting when its radar sensor

detects motion.

•Green LED: Turns on when recognizing registered faces.

•Red LED Turns on when detecting unknown faces.

Built-in Cameras

Captures real-time live images at the front of the panel.

Touchscreen Panel

Displays the live images captured by the built-in cameras and

accesses its local settings.

QR Code Reader

Reads QR codes used for access control. The QR code LED

turns on when detecting motion around.

Rear Panel

Contains all the ports of the GV-FR Panel, see No. 6 –10.

Reset Button

Restarts the GV-FR Panel.

Wiegand Port

Connects to 3rd-party controllers. See Chapter 8 Third-Party

Controller Integration.

USB OTG PH2.0-4P Port

Connects to a PC for data backup and/or firmware upgrade

via the supplied USB OTG PH2.0-4P cable

(currently non-functional).

USB Host PH2.0-4P Port

Connects to a USB keyboard or mouse via the supplied USB

Host PH2.0-4P cable.

RJ-45 Port

Connects to the network via the supplied RJ-45 cable.

Relay Output

Contains the following 3 relay pins: NO, COM and NC.

Introduction

2-Pin Power connector

Connects to power via the supplied 2-pin power cable and an

optional power adapter.

Microphone

(Currently non-functional)

Speaker

Sounds when typing the settings on the touchscreen, swiping

a card and scanning the QR code.

Note: The SIM card slot, RS-485 and RS-232 ports are not functional.

2. Installation

2.1 Connecting GV-FR Panel

Follow the steps below to connect GV-FR Panel.

1. Connect the GV-FR Panel to the network using the supplied RJ-45 cable with a

user-supplied Ethernet cable.

2. Optionally connect an output device, e.g. door lock, to the GV-FR Panel via its digital relay.

3. Connect the GV-FR Panel to power using the supplied 2-pin power cable and an optional

power adapter.

Upon first-time starting GV-FR Panel, users are prompted to set the login password for its

Administrator account. After setting the password, the live view of the GV-FR Panel’s built-in

camera appears.

Note: GV-FR Panel supports the output device of 30V DC, 1A.

Installation

2.2 Installation

For installing GV-FR Panel on a wall, follow the steps below.

1. Place the mounting bracket on the wall and mark the locations of the 4 screw positions

as illustrated below.

2. At each of the 4 screw positions marked on the wall, drill a hole slightly smaller than the

plastic screw anchors provided.

3. Insert the 4 plastic screw anchors into the holes drilled and secure the mounting bracket

onto the wall with the screws provided.

4. Secure the large sealing rubber and the back cover onto the back of the GV-FR Panel

with the screws provided.

Sealing Rubber

Back Cover

Note: Thread the necessary cables through the back cover and connect them to the panel

before securing the cover.

5. Secure the small sealing rubber and the mounting plate onto the GV-FR Panel with the

screws provided.

6. Secure the GV-FR Panel onto the wall by attaching its mounting plate onto the wall

mount bracket.

7. Insert a screw onto each side of the wall mount to secure and complete the installation.

For optional installation to mount GV-FR Panel on a surface, see the User’s Manual.

Andere Handbücher für GV-FR

Inhaltsverzeichnis

Andere GeoVision IP-Zugriffskontrollsysteme Handbücher

GeoVision

GeoVision GV-CS1320 Bedienungsanleitung

GeoVision

GeoVision GV-Reader 1251 Bedienungsanleitung

GeoVision

GeoVision GV-CS1320 Bedienungsanleitung

GeoVision

GeoVision GV-CS1320 Bedienungsanleitung

GeoVision

GeoVision GV-FWC Bedienungsanleitung

GeoVision

GeoVision GV-FR2020 Bedienungsanleitung

GeoVision

GeoVision GV-QR1352 Bedienungsanleitung

GeoVision

GeoVision GV-FR Bedienungsanleitung

Beliebte IP-Zugriffskontrollsysteme Handbücher anderer Marken

ZKTeco

ZKTeco SpeedFace-V5L Bedienungsanleitung

Jantar

Jantar REX A-1-9 Bedienungsanleitung

2N Access Unit Merkblatt

Kedacom

Kedacom KSCA120 Series Bedienungsanleitung

H3C

H3C WX2880X Bedienungsanleitung

G4S

G4S S870-EX Leitfaden

PRASTEL

PRASTEL M2000PE Bedienungsanleitung

Allegion

Allegion interflex IF-281 Cylinder Bedienungsanleitung

TECOM

TECOM TS1067E Bedienungsanleitung

Fermax

Fermax Memokey 100C Benutzerhandbuch

Fermax

Fermax CITYLINE MEMOKEY Bedienungsanleitung

Software House

Software House iSTAR Pro 2U RM Bedienungsanleitung

AKCP

AKCP SP+ Bedienungsanleitung

Bpt

Bpt HNA/102 Bedienungsanleitung

Civintec

Civintec CV9601T-T-1F Bedienungsanleitung

BioMax

BioMax N-X90W Bedienungsanleitung

ZKTeco

ZKTeco OP-200 Bedienungsanleitung

FingerTec

FingerTec s-Kadex Bedienungsanleitung