Gestetner AO70 Bedienungsanleitung

Shift

Moves (shifts) the copy image up,

down, left, or right to create a margin.

Preparation

You can select the following types

of margin for this function.

•[↑

↑↑

↑]key (Top): Shifts the image

towards the leading edge of the

original (top of the copy.)

•[↓

↓↓

↓]key (Bottom): Shifts the im-

age towards the trailing edge of

the original (bottom of the

copy.)

•[←

←←

←]key (Left): Shifts the image

towards the left of the original.

•[→

→→

→]key (Right): Shifts the im-

age towards the right of the

original.

You can shift the image from 0 to

200mm in 1mm steps (0 to 7.8" in

0.1" steps).

The default setting is 20mm, 2.0".

You can change this setting. See

p.133 “Shift Image Area Priority”

You can also shift the image in a

combination of up/down and left/

right.

Limitation

❒When using the print and shift set-

tings, the print position is moved

in the direction of the shift setting.

❒You can use the Shift function for

copy sizes up to A0 (E).

APress the [Shift/Erase]key.

BPress the [Shift]key.

ZEDG110E

DolphinGB-Copy-F_V4_FM.book Page 71 Monday, June 11, 2001 5:02 PM

Copying

Creating a top or bottom margin

APress the [↑

↑↑

↑]or [↓

↓↓

↓]keys to set

the length of the shift amount.

Creating a left or right margin

APress the [←

←←

←]or [→

→→

→]keys to set

the length of the shift amount.

CPress the [OK]key.

DolphinGB-Copy-F_V4_FM.book Page 72 Monday, June 11, 2001 5:02 PM

Border Erase

Erases the rim area of the original im-

age.

Preparation

The default border erase setting is

10mm, 0.4". You can change this

setting. See p.133 “Border Erase

Width Priority”

APress the [Shift/Erase]key.

BPress the [Border Erase]key.

Setting border erase to same

width

APress the [Same Width]key.

BPress the [-]or [+]keys to set

the Border Erase width, and

then press the [OK]key.

Setting border erase to separate

widths

APress the [4 Sides]key.

ZEDX080E

DolphinGB-Copy-F_V4_FM.book Page 73 Monday, June 11, 2001 5:02 PM

Copying

BPress the [Top], [Bottom], [Left]

and [Right]keys to select the

erase rim area, and set the Bor-

der Erase width using the [-]or

[+]keys. Then press the [OK]

key.

Limitation

❒When using the Border Erase

function with other func-

tions, see p.102 “Chart of

Scan Sizes for Each Func-

tion”.

DolphinGB-Copy-F_V4_FM.book Page 74 Monday, June 11, 2001 5:02 PM

Delete Inside

Copies the original while erasing

parts inside a specified area.

Limitation

❒If the original is larger than A1,

you can only erase one area (Met-

ric version only).

❒If the original is larger than C, you

can only erase one area (Inch ver-

sion only).

Note

❒The area is specified by defining to

two points for the top left of the

original (X1, Y1) and two points for

the size of the area (X2, Y2). Meas-

ure the area you want to specify

before entering the area settings.

❒

When using this function with the

magnification function, the actual

setting will be the specified setting

multiplied by the reproduction ratio.

❒You can specify up to 5 areas.

APress the [Shift/Erase]key.

BPress the [Delete Inside]key.

CPress the [Y1], [Y2], [X1]and [X2]

keys to select the delete position,

and enter the values to specify the

area, and then press the [#]key.

Note

❒To change the value, press the

[Clear]key, and then enter the

new value.

Delete Inside

ZEDX010E

ZEDG140E

Area

DolphinGB-Copy-F_V4_FM.book Page 75 Monday, June 11, 2001 5:02 PM

Copying

DTo specify several areas, specify

areas 1 –5 in the same way.

EPress the [OK]key.

DolphinGB-Copy-F_V4_FM.book Page 76 Monday, June 11, 2001 5:02 PM

Delete Outside

Copies the original while erasing

parts outside a specified area.

Limitation

❒If the original is larger than A1,

you can only specify one area

(Metric version only).

❒If the original is larger than C, you

can only erase one area (Inch ver-

sion only).

Note

❒The area is specified by defining

two points for the top left of the

original (X1, Y1) and two points for

the size of the area (X2, Y2). Meas-

ure the area you want to specify

before entering the area settings.

❒

When using this function with the

magnification function, the actual

setting will be the specified setting

multiplied by the reproduction ratio.

❒You can specify up to 5 areas.

APress the [Shift/Erase]key.

BPress the [Delete Outside]key.

CPress the [Y1], [Y2], [X1]and [X2]

keys to select the delete position,

and enter the values to specify the

area, and then press the [#]key.

DTo specify several areas, specify

areas 1 –5 in the same way.

EPress the [OK]key.

Delete Outside

ZEDX020E

ZEDG140E

Area

DolphinGB-Copy-F_V4_FM.book Page 77 Monday, June 11, 2001 5:02 PM

Copying

Double Copies

One original image is copied twice on

to one copy as shown in the illustra-

tion.

Limitation

❒You can copy an image up to A2

function K. You can use a paper

size up to A1 (D) L.

Note

❒You can erase the separation line

between the two images. The de-

fault setting is Separation Line. See

p.134 “Double Copies Separation

Line”

❒When using Double Copies, the

paper size must be twice as large as

the original (when [Full Size]is se-

lected). When using Reduce/En-

large, consider the magnification

ratio when selecting the paper size.

APress the [Edit Image]key.

BPress the [Double Copies ]key.

CPress the [OK]key.

ZEDG170E

DolphinGB-Copy-F_V4_FM.book Page 78 Monday, June 11, 2001 5:02 PM

Image Repeat

The original image is copied repeat-

edly.

Preparation

The number of repeated images

depends on the original size, copy

paper size, and reproduction ratio.

•For example you can copy eight

images of a A4 (A) original to

A1 (D) size copy paper.

Limitation

❒You cannot use the bypass tray.

❒Depending on the paper size and

the reproduction ratio, the repeat-

ed image may be cropped.

❒You can use Image Repeat for cop-

ies with sizes up to A0(E).

❒When Image repeat is selected, the

maximum length for Variable Cut

is 1,248mm, 48".

❒When you have used Image Re-

peat with the stamp function, you

cannot delete only the repeated

image when using Additional

Copy.

Note

❒You can insert separation lines

(Solid, Broken, Crop Marks) be-

tween repeated images. The de-

fault setting is None. See p.133

“Image Repeat Separation Line”

❒When using Image Repeat with the

Shift function, the composite im-

age is repeated.

❒When using Image Repeat with the

Image Overlay function, the com-

posite image is repeated.

ASelect the paper.

BPress the [Edit Image]key.

CPress the [Image Repeat]key.

DPress the [OK]key.

ZEDG180E

DolphinGB-Copy-F_V4_FM.book Page 79 Monday, June 11, 2001 5:02 PM

Copying

Positive/Negative

Black and white areas of the original

are reversed.

Limitation

❒You can use Positive/Negative for

copies with sizes up to A0(E).

Note

❒When making continuous copies,

the image density may deteriorate.

See p.106 “If You Cannot Make

Clear Copies”

APress the [Edit Image]key.

BPress the [Positive/Negative]key.

CPress the [OK]key.

ZEDG150E

DolphinGB-Copy-F_V4_FM.book Page 80 Monday, June 11, 2001 5:02 PM

Andere Handbücher für AO70

Inhaltsverzeichnis

Andere Gestetner Kopierer Handbücher

Gestetner

Gestetner 9920 Bedienungsanleitung

Gestetner

Gestetner 5390 Bedienungsanleitung

Gestetner

Gestetner DSm616 Montage- und Wartungsanleitung

Gestetner

Gestetner 3225 Bedienungsanleitung

Gestetner

Gestetner 1045 Montage- und Wartungsanleitung

Gestetner

Gestetner 5499 Bedienungsanleitung

Gestetner

Gestetner CS555 Bedienungsanleitung

Gestetner

Gestetner 6002 Gebrauchsanweisung

Gestetner

Gestetner DSc224 Montage- und Wartungsanleitung

Gestetner

Gestetner CS210 Bedienungsanleitung

Gestetner

Gestetner DSc224 Bedienungsanleitung

Gestetner

Gestetner 3220 Service-Handbuch

Gestetner

Gestetner DSm755 Gebrauchsanweisung

Gestetner

Gestetner 3240 Bedienungsanleitung

Gestetner

Gestetner 5502 Gebrauchsanweisung

Gestetner

Gestetner 10502 Bedienungsanleitung

Gestetner

Gestetner DSm415 Montage- und Wartungsanleitung

Gestetner

Gestetner 5502 Bedienungsanleitung

Gestetner

Gestetner DSc224 Service-Handbuch

Gestetner

Gestetner 1502 Betriebsanleitung

Gestetner

Gestetner 5309L Service-Handbuch

Gestetner

Gestetner F550 Handbuch

Gestetner

Gestetner CS213d Bedienungsanleitung

Gestetner

Gestetner 10512 Bedienungsanleitung

Beliebte Kopierer Handbücher anderer Marken

Canon

Canon iR1210 Referenzhandbuch

Ricoh

Ricoh FW740 Bedienungsanleitung

Minolta

Minolta CF910 Bedienungsanleitung

Ricoh

Ricoh B003 Bedienungsanleitung

Xerox

Xerox EC70 Bedienungsanleitung

Oce

Oce 9800 Bedienungsanleitung

Olivetti

Olivetti d-Copia 1800 Bedienungsanleitung

Minolta

Minolta Di181 Bedienungsanleitung

Canon

Canon iR5000i Bedienungsanleitung

Telecrane

Telecrane F25 Bedienungsanleitung

Xerox

Xerox WorkCentre Pro 40 Bedienungsanleitung

Canon

Canon NP6317 Anleitung zur Verwendung

Sharp

Sharp AR-5015 N Bedienungsanleitung

Ricoh

Ricoh Di-C1 Bedienungsanleitung

Mita

Mita MIP-2400 Handbuch

Sharp

Sharp AL-2061 Bedienungsanleitung

Muratec

Muratec MFX-C2280 Bedienungsanleitung

Ricoh

Ricoh FT5034C Bedienungsanleitung